Skip to main content

Trucking Mind

Each vehicle has its own clock. A tractor, a trailer and a converter dolly each need their own annual inspection under 49 CFR 396.17(a). Add every vehicle in the combination, not just the tractor.

Add your vehicles below. Every answer updates as you change each field. Your fleet list stays in this browser.

Vehicle 1
Vehicle 2

2 vehicles tracked. 1 vehicle due soon. 1 vehicle on track. Earliest due date: Nov 30, 2026 (Unit 205).

0Overdue
1Due soon
0Due in 60 days
1On track
0Need input

Unit 101 (Tractor)

On track

Due Mar 10, 2027

111 days left – last inspected Mar 10, 2026 (self-inspection or commercial garage).

Due 12 months after the inspection date (49 CFR 396.17(c)).

No action needed yet. Check the date again as the due date nears.

Keep the report until May 10, 2027 (14 months from the inspection date, 49 CFR 396.21(b)).

The inspection report is on the vehicle. That is the documentation 49 CFR 396.17(c) requires.

Unit 205 (Trailer)

Due soon

Due Nov 30, 2026

11 days left – last inspected Nov 25, 2025 (state periodic program).

Due 12 months after the last day of the inspection month (Nov 30, 2025) under 49 CFR 396.17(f).

Book the inspection now. The vehicle must pass before the due date.

Keep the report until Jan 25, 2027 (14 months from the inspection date, 49 CFR 396.21(b)).

The report is kept at the terminal or office. The vehicle must carry a sticker or decal based on the report showing the inspection date, the name and address where the report is kept, the vehicle identification if not clearly marked on the vehicle and a certification that the vehicle passed under 49 CFR 396.17.

Notes

  • Each vehicle in a combination needs its own inspection: tractor, trailer and converter dolly each count (49 CFR 396.17(a)).
  • Every vehicle whose report is kept off the vehicle must carry a sticker or decal with the four items 49 CFR 396.17(c)(2) lists.
  • State, Canadian and Mexican inspections count 12 months from the last day of the inspection month (49 CFR 396.17(f)).

This tracker applies 49 CFR Part 396 to your fleet list. It is not legal advice. Confirm the inspection type with the report before you rely on a due date.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice โ€” check the current regulation and your company policy before you rely on a result.

Quick answer: Every commercial motor vehicle must pass a DOT annual inspection at least once every 12 months. Each vehicle in a combination needs its own inspection, so a tractor and a trailer carry separate due dates. A self-inspection or garage inspection is due 12 months after the inspection date. A state, Canadian or Mexican inspection counts for 12 months from the last day of the inspection month. Proof must be on the vehicle as the report or a sticker or decal. This tracker works out the next due date for every vehicle in your fleet.

Last reviewed: ยท Focus keyword: DOT annual inspection requirements

What is a DOT annual inspection?

A DOT annual inspection is the periodic inspection that 49 CFR 396.17 requires for every commercial motor vehicle. A qualified inspector checks the vehicle against the minimum standards in Appendix A to Part 396 and records the result in an inspection report. The vehicle passes only when every component in Appendix A meets the standard. One failed component means no pass until the defect is fixed.

The inspection covers 15 categories, from the brake system and steering to tires, lighting and the frame. The standards are pass or fail, not a score. A vehicle with a single defect below the standard does not pass, even when everything else is sound.

The name is slightly misleading. The rule does not run on the calendar year. It runs on a rolling 12-month clock from the last inspection. A truck inspected on March 10 is due again by March 10 the next year, not by December 31.

Older guides call the standards Appendix G. FMCSA reorganized the regulations in 2021 and the standards are now Appendix A to Part 396. The content is the same list. When a manual or a form says Appendix G, it means Appendix A.

How often must a commercial truck be inspected?

At least once every 12 months. Section 396.17(c) says each component in Appendix A must have passed an inspection at least once during the preceding 12 months. The clock runs from the date of the last inspection. The federal rule sets no grace period.

Each vehicle in a combination has its own clock. Section 396.17(a) says the term commercial motor vehicle includes each vehicle in a combination. For a tractor semitrailer full trailer combination, the tractor, the semitrailer and the full trailer must each be inspected, including the converter dolly when one is fitted.

The annual inspection is separate from the daily checks. Drivers still inspect the vehicle before each trip and report defects at the end of each day. The Pre-Trip Inspection Checklist covers the daily walk-around. The DVIR Checker covers the end of day report. Neither one replaces the annual inspection.

States set their own rules for intrastate carriers. Most states adopt the federal 12-month rule, with local variations. Check your state rule if your trucks never cross a state line.

How is the next due date worked out?

It depends on who performed the last inspection. A self-inspection or an inspection by a commercial garage, a fleet leasing company or a truck stop is due 12 months after the inspection date. That is the rule in section 396.17(c): the components must have passed at least once during the preceding 12 months.

A state, Canadian or Mexican inspection gets a different count. Section 396.17(f) says those inspections count for 12 months commencing from the last day of the month in which the inspection was performed. An inspection on March 5 under a state program is therefore due on March 31 the next year, not March 5. The month rule can add up to 30 days.

Last inspectionInspection typeNext due dateRule
Mar 10, 2026Self-inspection or commercial garageMar 10, 202712 months after the inspection date
Mar 5, 2026State periodic programMar 31, 202712 months after the last day of the inspection month
Feb 29, 2024Self-inspection or commercial garageFeb 28, 2025February 2025 has no 29th day, so the date clamps to Feb 28
Nov 25, 2025State periodic programNov 30, 202612 months after Nov 30, 2025, the last day of the inspection month

Leap years need care. An inspection on February 29, 2024 is due on February 28, 2025, because February 2025 has no 29th day. The tracker clamps the date the same way.

Book early. An inspection done a week before the due date starts a fresh 12-month clock from the new inspection date. Waiting until the last day leaves no room for a failed component or a busy shop. Many fleets pair the annual inspection with a scheduled service visit. The PM Schedule Planner builds the service dates for the same truck.

Does a state inspection count as a DOT annual inspection?

Sometimes. Section 396.23 says a vehicle subject to a mandatory inspection program that FMCSA has determined is as effective as section 396.17 meets the federal requirement through that program. The state inspection must meet the minimum standards in Appendix A. An emissions-only test does not count.

FMCSA publishes a list of programs it has found comparable. The list covers 24 United States jurisdictions: Alabama for LPG vehicles only, California, Connecticut, the District of Columbia, Hawaii, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Texas, Utah, Vermont, Virginia, West Virginia and Wisconsin. Canada counts too: all 10 provinces and the Yukon Territory. Mexico counts through the NOM-068 program.

Two states left the list. Arkansas no longer runs a periodic inspection program for buses. Oklahoma repealed its inspection requirements. A vehicle inspected in either state needs a separate federal annual inspection.

If your vehicle is subject to a mandatory program, you must use that program. Section 396.23(a)(1) makes it compulsory. Section 396.17(d) bars self-inspection for vehicles subject to a mandatory program. A vehicle registered in a state without an equivalent program needs its own federal inspection, by the carrier or by a commercial garage.

Does a clean roadside inspection count?

No. A violation-free roadside inspection does not satisfy the annual inspection requirement.

The old text of section 396.23 let a carrier meet the federal rule through a state roadside inspection program. FMCSA removed that route in 2018. The current text of section 396.23 covers mandatory periodic programs only.

FMCSA guidance says the same thing in plainer terms: a violation-free CVSA Level I or Level V inspection is not equivalent to the federal periodic inspection. A roadside inspection checks the vehicle on that day. The annual inspection is a separate duty with its own report and its own 12-month clock.

A clean roadside inspection does not reset the clock. It does not extend the due date by a day. Keep the two duties apart in the maintenance file. The annual inspection due date moves only when a full Appendix A inspection is performed and reported.

What must be carried on the vehicle?

Proof of the inspection must be on the vehicle. Section 396.17(c) gives two ways to carry it. The first is the inspection report itself, prepared under section 396.21(a). The second is another form of documentation based on the report, such as a sticker or decal.

A sticker or decal must show four items: the date of inspection; the name and address of the motor carrier, intermodal equipment provider or other entity where the inspection report is maintained; information uniquely identifying the vehicle inspected if not clearly marked on the motor vehicle; and a certification that the vehicle has passed an inspection under section 396.17.

If the report itself rides on the vehicle, no sticker is needed. If the report stays at the terminal or with the shop, the sticker is what the inspector at the roadside sees. A missing or expired sticker draws a citation even when the inspection was done and the report is safe in the office.

The tracker tells you which form applies for each vehicle. It reads the report location you enter and shows the sticker requirement when the report is kept off the vehicle. When another carrier performed the last inspection, section 396.21(b)(3) makes your carrier responsible for obtaining the report on demand.

What does the inspection report have to contain?

Section 396.21(a) says the qualified inspector must prepare a report with six items. The report identifies the individual performing the inspection and the motor carrier operating the vehicle. It identifies the date of the inspection and the vehicle inspected.

The report then lists the vehicle components inspected and describes the results, including every component that did not meet the Appendix A standard. Finally it certifies the accuracy and completeness of the inspection as complying with all the requirements of the section.

  • The individual performing the inspection
  • The motor carrier operating the vehicle, or the intermodal equipment provider
  • The date of the inspection
  • The vehicle inspected
  • The components inspected and the results, including failures
  • Certification of accuracy and completeness

The regulation lists what the report must contain. It does not prescribe a single federal form. A carrier form, a shop form or a state form all work when they carry the six items. What matters is the content, not the letterhead.

How long must inspection reports be kept?

Fourteen months from the date of the inspection report. Section 396.21(b)(1) sets the period and the place: the original or a copy must be retained where the vehicle is housed or maintained. The report must be available for inspection on demand by an authorized federal, state or local official.

Fourteen months is two months longer than the 12-month inspection cycle. The overlap means the old report is still on file when the next inspection comes due. Do not purge a report the day the next inspection is done. The new report starts its own 14-month clock.

Other Part 396 records run on different clocks. Maintenance records under section 396.3 are kept one year where the vehicle is housed or maintained, plus six months after the vehicle leaves the control of the carrier. DVIRs are kept three months.

The DOT Record Retention Checker covers the drug and alcohol tiers. The Maintenance Records and Retention Tracker covers the maintenance file. The DVIR Checker covers driver reports.

The tracker shows the purge date for each report: 14 months from the inspection date. Keep the report until that date, then file the new one in its place.

Who can perform the annual inspection?

Only a qualified inspector. Section 396.19 sets three conditions. All three must hold at once. The inspector must understand the inspection criteria in Part 393 and Appendix A and be able to identify defective components. The inspector must know and have mastered the methods, procedures, tools and equipment used in an inspection.

The third condition is experience or training. The inspector must have completed a federal or state sponsored training program, hold a certificate from a state or Canadian province that qualifies the person to perform commercial motor vehicle safety inspections, or have a combination of training or experience totaling at least one year.

The one-year route can mix four kinds of experience: a manufacturer sponsored training program; work as a mechanic or inspector in a carrier maintenance program; work as a mechanic or inspector at a commercial garage, a fleet leasing company or a similar facility; or work as a commercial motor vehicle inspector for a state, provincial or federal government.

The carrier may inspect its own vehicles under section 396.17(d), unless a mandatory state program applies. Or the carrier may use a commercial garage, a fleet leasing company or a truck stop as its agent under section 396.17(e).

Either way the inspector must be qualified. The Inspector Qualification Checker runs the section 396.19 test for one person.

Keep evidence of the qualifications of each inspector for the period that person inspects for the carrier, plus one year after. Section 396.19(b) sets that period. No evidence is needed for inspections performed as part of a state periodic inspection program. Brake work has a second rule: brake inspectors qualify separately under section 396.25.

What happens if an inspection lapses?

The vehicle must not be used. Section 396.17(c) bars a carrier from using a commercial motor vehicle unless each Appendix A component has passed an inspection in the preceding 12 months and documentation is on the vehicle. An overdue truck parked in the yard is a scheduling problem. The same truck on the highway is a violation.

Section 396.17(h) sends a failed inspection to the penalty provisions of 49 U.S.C. 521(b). The FMCSA Fine Calculator shows the maximum civil penalty for the violation category.

The citation also lands on the CSA record. FMCSA Safety Measurement System data lists two codes in the Vehicle Maintenance BASIC at severity weight 4.

Code 396.17(c) covers operating a CMV without proof of a periodic inspection. Code 396.17C-PI covers operating a CMV without documentation of a periodic inspection. The CSA Violation Points Checker shows the time weight and the day the violation falls off the 24-month window.

The documentation duty is separate from the inspection duty. A truck inspected on time but carrying no report and no sticker is cited for the missing proof. A truck with a valid sticker but an inspection 13 months old is cited for the lapsed inspection. Check both halves before the truck rolls.

What does the annual inspection cover?

Appendix A to Part 396 lists 15 categories. A vehicle does not pass when it has any one of the defects the appendix names. The categories run from the brake system and coupling devices through steering, suspension, frame, tires, wheels and rims to lighting, glazing, wipers and the rear impact guard.

Brakes take the largest share of the appendix, with service brakes, parking brake, drums and rotors, hoses, air systems and ABS. Pushrod stroke is measured against the readjustment limits for the chamber type. The Brake Pushrod Stroke Checker runs those limits for one axle.

Tires, lighting and steering each carry their own pass or fail limits. Steering tires need 4/32 inch of tread depth and other tires need 2/32 inch. Every required lamp and reflector must work. Steering wheel play must stay inside the limit for the wheel diameter. The Tire Compliance Checker, the Lighting and Reflector Checker and the Steering Lash Checker cover those three categories.

CategoryWhat the inspector checks
1. Brake systemService brakes, parking brake, drums and rotors, hoses, air compressor, ABS, automatic adjusters
2. Coupling devicesFifth wheels, pintle hooks, drawbars, safety devices, saddle mounts
3. Exhaust systemLeaks, mounting, discharge location away from the cab and the fuel system
4. Fuel systemLeaks, secure mounting, fuel cap present
5. Lighting devicesEvery lamp and reflector required by Part 393, working and correct in color
6. Safe loadingCargo securement, tailgates, doors, tarps and protection against shifting
7. Steering mechanismFree play, column, gear box, linkage, power steering parts
8. SuspensionSprings, U-bolts, torque rods, axle positioning parts, air suspension
9. FrameMembers, cross members, tire and wheel clearance, adjustable coupler assembly
10. TiresTread depth, sidewall condition, load, inflation, no regrooved tires on steering axles of certain vehicles
11. Wheels and rimsCracks, unseated locking rings, fasteners, welds
12. Windshield glazingCracks and vision-reducing matter outside the defined border areas
13. Windshield wipersWipers present and working
14. Motorcoach seatsSeat frames and mountings on motorcoaches
15. Rear impact guardGuard present and sound where required on trailers and semitrailers

Use the annual inspection as a findings list, not a surprise. A pre-inspection walk around the truck with the Appendix A categories in hand catches most failures before the inspector does.

How do you use the Annual Inspection Due-Date Tracker?

The tracker holds your whole fleet in one list. Your vehicles stay in this browser. Nothing is sent to our servers.

  1. Add each vehicle in your fleet with its label and type.
  2. Enter the last inspection date and the inspection type for each vehicle.
  3. Say where the inspection report is kept for each vehicle.
  4. Read the next due date, days left and alert band for every vehicle.
  5. Check what each vehicle must carry and how long to keep each report.
  6. Copy the summary or download the CSV for the maintenance file.

Frequently asked questions

How often is a DOT annual inspection required?

At least once every 12 months. Section 396.17(c) says each component in Appendix A to Part 396 must have passed an inspection at least once during the preceding 12 months. Each vehicle in a combination needs its own inspection, so a tractor and its trailer carry separate due dates.

Does a state inspection satisfy the DOT annual inspection?

Only when FMCSA has determined that the state program is as effective as section 396.17. FMCSA publishes a list of comparable programs covering 24 United States jurisdictions plus all 10 Canadian provinces, the Yukon Territory and the Mexican NOM-068 program. A state inspection that is not on that list does not satisfy the federal rule.

When is my next annual inspection due?

A self-inspection or garage inspection is due 12 months after the inspection date. A state, Canadian or Mexican inspection is due 12 months after the last day of the inspection month. An inspection on March 5 under a state program is due on March 31 the next year.

What happens if I miss the annual inspection date?

The vehicle must not be used until it passes an inspection. Section 396.17(h) sends the failure to the federal penalty provisions. FMCSA also counts the violation in the Vehicle Maintenance BASIC at severity weight 4.

How long do I keep an annual inspection report?

Fourteen months from the date of the inspection report, kept where the vehicle is housed or maintained. The report must be available on demand to an authorized federal, state or local official. The tracker shows the purge date for each report.

Can I inspect my own truck?

Yes, when the vehicle is not subject to a mandatory state inspection program and the inspector meets section 396.19. The inspector must understand the Part 393 and Appendix A criteria and have mastered the inspection methods and tools. Qualification comes through a training program, a certificate or at least one year of combined training and experience.

Related tools

Sources

  1. 49 CFR 396.17, Periodic inspection. ecfr.gov/current/title-49/section-396.17 Last amended 86 FR 57077, Oct 14, 2021. Accessed November 19, 2026.
  2. 49 CFR 396.19, Inspector qualifications. ecfr.gov/current/title-49/section-396.19 Last amended 86 FR 57077, Oct 14, 2021. Accessed November 19, 2026.
  3. 49 CFR 396.21, Periodic inspection recordkeeping requirements. ecfr.gov/current/title-49/section-396.21 Last amended 86 FR 57077, Oct 14, 2021. Accessed November 19, 2026.
  4. 49 CFR 396.23, Equivalent to periodic inspection. ecfr.gov/current/title-49/section-396.23 Last amended 83 FR 22881, May 17, 2018. Accessed November 19, 2026.
  5. Appendix A to Part 396, Minimum Periodic Inspection Standards. ecfr.gov/current/title-49/part-396/appendix-Appendix A to Part 396 Last amended 87 FR 59037, Sep 29, 2022. Accessed November 19, 2026.
  6. J.J. Keller, State Inspection Programs. jjkeller.com/learn/state-inspection-programs FMCSA list of equivalent inspection programs. Accessed November 19, 2026.
  7. FMCSA Safety Measurement System, Vehicle Maintenance BASIC violation data. ai.fmcsa.dot.gov/SMS Severity weight 4 for 396.17(c) and 396.17C-PI. Accessed November 19, 2026.
  8. Whiparound, DOT Inspection vs. State Inspection: What is the Difference? whiparound.com/blog/dot-inspection-vs-state-inspection FMCSA guidance that a violation-free CVSA Level I or Level V inspection is not equivalent to the federal periodic inspection. Published November 12, 2026. Accessed November 19, 2026.
Follow on WhatsApp Ask by Voice