1. Pick your pay model
CPM pay terms
Example $0.65. Entered to 3 decimals.
Most CPM contracts pay on loaded miles only. Deadhead is often unpaid.
Percentage pay terms
The full load revenue before any split.
Leave blank to pay on the full gross revenue. Enter a lower figure when your contract pays a percentage after the fuel surcharge or accessorials are removed.
Example 72.5%. Entered to 3 decimals.
Flat pay terms
Hourly pay terms
Example 58.5 hours.
Every hour pays at this one rate in v1. Overtime is not modelled. See the FAQ.
Custom gross pay
Enter the gross pay figure from your contract, rate sheet or carrier sheet. The rows below apply to it.
2. Miles for this settlement
Required in CPM mode. Used for the effective pay per mile line in every model.
Empty miles. Paid only when the miles basis is All miles. Always counted in total miles.
3. Pay period and labels — optional
Labels the settlement only. It never changes the math.
A nickname or unit label. Never a full name. Shown on the statement only.
Shown on the statement only.
4. Advances — money already paid to you
Cash advance, fuel advance, comcheck. These come off your settlement.
5. Deductions — user-supplied
Tap a preset to fill the label, then enter the amount yourself. Every deduction here is user-supplied. This tool never decides whether a deduction is permitted.
Check your contract and your state’s labor laws before you accept any deduction. This tool does not decide whether a deduction is permitted.
6. Reimbursements — money the carrier owes you back
Tolls, lumper, scale tickets, parking. These add to your settlement.
7. Accessorials — extra pay for extra work
Detention, layover, TONU, stop pay, extra stops. These add to your settlement.
Driver Settlement Statement
Your estimated settlement
Estimated net settlement. Compare this line with your carrier’s sheet.
Changes to this settlement
Every figure above is estimated from the numbers you entered. This tool cannot verify your carrier’s settlement sheet.
Compare pay models on the same work
Add a scenario to compare pay models side by side before you sign. Each scenario uses the same advances, deductions, reimbursements and accessorials from the form above. Only the pay model and its rate differ.
Scenario 2
Pay model
Scenario 3
Pay model
Highest net here does not mean the best deal. Pay models differ in risk, deadhead pay and what happens on a bad week.
Save your pay profile and settlement
Your numbers stay in your browser. Nothing is sent to our servers.
Quick answer: A truck driver settlement is your gross pay minus advances and deductions, plus reimbursements and accessorials. On 1,000 loaded miles at $0.65 per mile with a $200 advance and $130.50 in deductions, the estimated net settlement is $427.25. Enter your pay model and your figures above to see your own settlement before payday.
What to check in your contract
Numbers this calculator cannot see can change the real pay. Check these items in your contract before you sign.
- Miles basis: paid miles, practical miles or hub miles — and whether deadhead pays
- Revenue basis: full load revenue or revenue after fuel surcharge and accessorials
- Deduction list: exactly which deductions the contract allows and their caps
- Escrow: how much is held, when it is returned and what can be kept from it
- Chargebacks: what the carrier can charge back and how disputes are handled
- Pay timing: when the settlement is paid and how advances are recovered
- Termination: what happens to unpaid settlements and escrow when the lease ends
This checklist is general information. It is not legal advice. Check your contract and your state’s labor laws.
Driver settlement questions
How is a driver settlement calculated?
Start with gross pay: your rate times your miles, your percentage times the eligible revenue, your flat amount or your hours times your hourly rate. Add reimbursements and accessorials. Subtract advances and deductions. The result is your estimated net settlement.
What is the difference between gross pay and net settlement?
Gross pay is what you earn before anything is taken out. Net settlement is what you take home after advances and deductions, plus any reimbursements and accessorials. The gap between the two is where most settlement disputes start.
Are deadhead miles paid in a CPM settlement?
It depends on your contract. Most CPM contracts pay on loaded miles only, so deadhead miles earn nothing. Some contracts pay on all miles driven, so pick either basis here and see the difference in dollars.
Can a carrier deduct fuel, insurance or escrow from my settlement?
Many contracts allow deductions for fuel, insurance, escrow and other items, but the rules vary by contract and by state. This tool labels every deduction as user-supplied and does not decide whether a deduction is permitted. Check your contract and your state’s labor laws.
What is the difference between a CPM settlement and a percentage settlement?
A CPM settlement pays a fixed rate per mile, so your pay follows your miles. A percentage settlement pays a share of the load revenue, so your pay follows the rate. Compare both models on the same load in this calculator before you sign.
Does this calculator handle overtime pay?
No. The hourly model pays every hour at the same rate in v1. If your contract pays overtime, enter the blended result as a custom gross pay or add the overtime premium as an accessorial row.
Related tools and guides
- Per-Mile Profit Calculator — load profit, the carrier’s view of the same load
- Cost Per Mile Calculator — know your costs per mile
- Dispatch Fee Calculator — another percentage of gross to compare against
- Factoring True-Cost Calculator — what getting paid early really costs
- Detention Pay Calculator — detention owed, enter it here as an accessorial
- Per Diem Calculator — per-diem pay for days on the road
- Detention, Layover and TONU Pay — the accessorial pay guide
- Break-Even Rate Per Mile — the rate your truck needs to cover its costs
- How to Calculate Cost Per Mile — the cost-per-mile guide
This calculator gives estimates from the numbers you enter. It is not legal advice, financial advice or tax advice.
It does not decide whether any deduction is permitted. Check your contract and your state’s labor laws before you accept a deduction or sign a pay agreement.
Your numbers stay in your browser. Nothing is sent to our servers.
What this truck driver settlement calculator does
A settlement is the statement a carrier gives a driver at the end of a pay period. It starts with gross pay, takes off advances and deductions, and adds back reimbursements and accessorials. What is left is the net settlement: the money that actually reaches the driver. This truck driver settlement calculator works out that figure from the numbers you enter, so you can see your net pay before payday instead of finding out from the statement.
It covers the five pay models drivers are usually offered: cents per mile, percentage of revenue, a flat amount, hourly pay and a custom gross figure. You can add advances, deductions, reimbursements and accessorials as separate rows, save a scenario for each offer, and compare the models side by side on the same work. The results are estimates from your own figures. The calculator does not decide whether a deduction is permitted, and it is not legal, financial or tax advice.
How to use the truck driver settlement calculator
Work through the steps in order. It takes about two minutes with a settlement statement or a contract in front of you.
- Pick your pay model. Choose CPM, percentage, flat, hourly or custom, and enter the rate, the revenue or the hours it applies to.
- Enter the miles for the settlement: loaded miles, and deadhead miles if your contract pays them. Choose whether the rate applies to loaded miles only or to all miles.
- Add any advances you have already received, such as a cash advance or a fuel advance. These come straight off the settlement.
- Add each deduction from the contract or the statement, with its own amount. Use the preset labels for fuel, insurance, escrow, truck payment and the rest.
- Add reimbursements and accessorials — tolls, lumper fees, detention and layover pay — then press “Calculate my settlement” and read the net figure.
Save the result as a pay profile or download it as a CSV statement, so you can check the next settlement against the same numbers.
How the settlement is worked out
The maths is the same in every model. Net settlement equals gross pay, minus advances, minus deductions, plus reimbursements, plus accessorials. Gross pay is the only part that changes with the model: in CPM it is the rate times the paid miles, in percentage it is the share of the eligible revenue, in flat it is the fixed amount, and in hourly it is the rate times the hours. Everything else is added or taken off in the same way.
The miles basis is where most settlements go wrong. Most CPM contracts pay on loaded miles only, so deadhead miles earn nothing; a few pay on all miles driven. Enter the basis your contract actually uses, and check it against the statement. If the carrier pays on practical miles and you enter hub miles, the gross pay will be overstated. The Cost Per Mile Calculator shows what each mile really costs you, which is the other side of the same sum.
Worked example: one load, two pay models
Take one load: 1,000 loaded miles and 150 deadhead miles. The driver has a $150 cash advance, an $85 insurance deduction and $50 held for escrow, and is owed $40 for detention and $25 for a lumper fee. The two offers on the table are 65 cents per mile on loaded miles only, and 27 percent of load revenue of $2,400.
| Item | CPM offer | Percentage offer |
|---|---|---|
| Gross pay | $650.00 | $648.00 |
| Advances | -$150.00 | -$150.00 |
| Deductions | -$135.00 | -$135.00 |
| Reimbursements and accessorials | +$65.00 | +$65.00 |
| Net settlement | $430.00 | $428.00 |
On this load the two offers are worth almost the same: $430 against $428. The percentage offer only wins when the load revenue is high for the miles run, and the CPM offer only wins when the miles are long and the rate is low. That is why the comparison matters more than either figure on its own. Run both models on your own loads before you sign, and keep the statement so you can check the carrier’s figures against the ones you calculated. The Detention Pay Calculator works out the detention figure to enter as an accessorial, and the Per-Mile Profit Calculator shows the load from the carrier’s side.
Who should use it
Company drivers comparing two carriers, lease-purchase drivers checking a weekly settlement, and owner-operators who want to see whether a percentage deal beats their usual CPM rate. It is also useful when a settlement looks short: enter the figures from the statement and see which line explains the gap. Fleet owners can use it to show a driver exactly how a settlement was built. If you spend nights away from home, the Per Diem Calculator works out the per-diem pay for those days, which sits outside the settlement itself.
What this calculator cannot tell you
The calculator cannot see your contract, and the contract is what decides what is paid and what can be deducted. Under the FMCSA truth-in-leasing rules (49 CFR 376.12), a carrier leasing equipment from an owner-operator must set out the compensation in the lease and give the driver a settlement sheet with each payment, showing the compensation, deductions and charge-backs. If a deduction on your statement is not in the lease, or the sheet does not explain it, ask for the paperwork before you accept it. State labor laws add their own limits on deductions from a company driver’s pay. This page is general information, not legal advice: check your contract and your state’s labor laws before you sign a pay agreement or accept a deduction.