Quick answer: A single-trip oversize permit costs as little as $8 in Oregon and $10 in Montana, and up to $60 in Texas before weight fees. Most states charge $15 to $40 for an oversize-only move, and overweight loads add weight, distance or per-ton charges on top. The table below lists every state from its own official source, and the calculator underneath works out whether your load pays once permits, escorts and running costs are counted.
Single-trip oversize and overweight permit fees, all 50 states and DC
Fees are for a single-trip permit for a non-divisible load, as published by each state. Where a state prices by weight, distance or axle count, the table shows the formula, not a made-up single number. Where we could not verify a fee against that state’s own official source, the row says Check with the state DOT instead of a number. Fees change without notice: confirm with the issuing agency before you move.
Read the fee, then read the row. A $15 base fee is not the whole cost in most states. Overweight loads add per-ton, per-mile or per-axle charges, and several states add transaction, service or card fees on top. The notes in each row say what stacks on the base.
| State | Single-trip fee (verified) | Official source |
|---|---|---|
| Alabama | General width, height or length $20 (up to 100,000 lbs), $40 (to 125,000), $70 (to 150,000), $110 (over 150,000). Weight only $10 to $100. Annual $100. | ALDOT Permit Fee Schedule (revised Mar 11, 2025) |
| Alaska | $40 oversize only, $40 overweight only, $70 both. Add $25 width 10 to 16 ft, $35 width over 16 ft, height surcharges, and $25 at 150,000 lbs gross or more. Extended-period permits up to $1,100 a year. | Alaska DOT&PF, 17 AAC 25.380 (effective Feb 29, 2016) |
| Arizona | Oversize $15, overweight $75, combined $75. 30-day size $30, weight $75. Annual size $360, weight $600. | A.R.S. § 28-1105 (via FindLaw) |
| Arkansas | $17 per permit, plus per ton over legal weight by miles: $8 (up to 100 mi), $10 (101 to 150), $12 (151 to 200), $14 (201 to 250), $16 (251 and over). Separate lower chart for mobile construction vehicles. | Ark. Code § 27-35-210 (via FindLaw); ARDOT 2023 Permit Rules, Appendix 3 |
| California | $16 single trip (7 consecutive days). Annual and repetitive permits $90. | Caltrans Single Trip Permit Application Instructions |
| Colorado | Oversize $30. Overweight or oversize and overweight $30 plus $10 per axle. Annual $250 oversize, $400 overweight or both. Chapter 6 Special $250. Superload $800. | CDOT Non-Divisible Permits (PDF) |
| Connecticut | $30 base plus $12 electronic transmittal fee. Engineering surcharge $2 per 1,000 lbs over 200,000 lbs. | CTDOT Oversize / Overweight Permits |
| Delaware | Check with the state DOT | Delaware DOT (DelDOT) |
| District of Columbia | Check with the state DOT | District Department of Transportation (DDOT) |
| Florida | Check with the state DOT | Florida DOT (fee rule 14-26.008) |
| Georgia | Standard Single $30 (up to 16 ft wide and high, up to 150,000 lbs). Superload Single $125. Superload Plus and Mega $500. Annual $150, annual plus $500. | O.C.G.A. § 32-6-28 (via Justia) |
| Hawaii | Check with the state DOT | Hawaii DOT |
| Idaho | Check with the state DOT | Idaho Transportation Department |
| Illinois | Overdimension (Table 1) $12 to $125 by dimension category and mileage bracket (0 to 90, 91 to 180, 181 to 270, over 270 miles). Overweight is priced by a separate IDOT table: check the current Table 2 with IDOT. | IDOT Table 1, Overdimension Fee Categories (revised Jan 16, 2024) |
| Indiana | Oversize $20, $30 or $40 by size. Overweight $20 plus $0.35 per mile (to 108,000 lbs), $0.60 per mile (108,001 to 150,000), $1.00 per mile (over 150,000). $10 executive fee over 120,000 lbs. $25 design and review fee over 200,000 lbs plus bridge fees. A combined permit is charged at whichever calculation is greater. Note: the rule text and the DOR schedule disagree on the executive fee ($25 vs $10); confirm with Indiana DOR. | Indiana DOR Oversize/Overweight Vehicle Permit Fees (rev. Jul 2026); 105 IAC 10-1.5-3 |
| Iowa | $35 single trip (5 days); round trip $70; duplicate $2. Single-trip overweight permits may carry an additional ton fee under HF 979 (effective Oct 27, 2025); confirm the amount with Iowa DOT. Single-trip registration $4 per ton over 40 tons. | Iowa DOT rulemaking, 761 IAC ch. 511 (Iowa Code § 321E.9, § 321E.14) |
| Kansas | $40 single trip. Large structure $200. Superload $200. Annual $200. | K.S.A. § 8-1911 (via Justia) |
| Kentucky | Check with the state DOT | Kentucky Transportation Cabinet |
| Louisiana | Check with the state DOT | Louisiana DOTD |
| Maine | Check with the state DOT | Maine DOT |
| Maryland | $30 base (up to 90,000 lbs); plus $5 per ton over 90,000 lbs. Return or 10-day permit doubles the fee. Engineering review $8 per structure over 60 tons. Note: COMAR 11.04.01.08 still prints a 40-ton threshold; the statute and the SHA fee table use 90,000 lbs. Confirm with MDOT SHA. | Md. Code, Transportation § 24-112; COMAR 11.04.01.08 |
| Massachusetts | Check with the state DOT | MassDOT |
| Michigan | Check with the state DOT | Michigan DOT |
| Minnesota | $15 base. Overweight adds a damage-assessment fee per axle group per mile ($0.04 to $0.30 per mile by group weight and spacing; MnDOT worked example $0.33 per mile). Job permit base $36. | Minn. Stat. § 169.86 (PDF); MnDOT damage assessment fee page |
| Mississippi | Check with the state DOT | Mississippi DOT |
| Missouri | Check with the state DOT | Missouri DOT (MoDOT) |
| Montana | $10 trip permit for oversize; $75 term permit. Overweight adds distance-based charges: $3.50 per 5,000 lbs of excess axle weight per 25-mile increment, and a bridge-formula distance charge. See the MDT FAQ for the full overweight schedule. | MCA § 61-10-124; MDT MT Permitting FAQ (updated Jan 27, 2026) |
| Nebraska | Single trip: overdimensional only $15, overweight only $20, both $25. Amendment $10. | 408 NAC ch. 3 § 009.04 (via Cornell LII) |
| Nevada | Check with the state DOT | Nevada DOT |
| New Hampshire | Check with the state DOT | New Hampshire DOT |
| New Jersey | $10 oversize or overweight; $20 if both. Plus $1 per foot of width over 14 ft, $1 per foot of combination length over 63 ft, $5 per 2,000 lbs over the limit, plus a $12 transaction fee and a 5 percent service charge. Confirm with NJMVC. | N.J.A.C. § 13:18-1.6 (via Justia) |
| New Mexico | Check with the state DOT | New Mexico DOT |
| New York | $40 single trip ($10 amendment). No variable per-ton or per-mile surcharge on the published schedule. Monthly $60 to $250, annual $360 to $900. | NYSDOT Special Hauling Permit Types and Fees |
| North Carolina | $12 per dimension over the legal limit (width, height, length, weight), so $12 to $48. Valid 10 days. Over 132,000 lbs gross requires a superload permit, plus $3 per 1,000 lbs over 132,000 lbs. | N.C. Gen. Stat. § 20-119; NCDOT Publication ST-1 (rev. 11/19) |
| North Dakota | $20 single trip plus an $8 service and routing fee. Interstate permit $10 per trip. Overwidth up to 14 ft 6 in or overlength up to 120 ft $20 per trip. | North Dakota Highway Patrol, Overdimensional Only; NDCC § 39-12-02 |
| Ohio | $20 processing charge plus a surcharge per one-way movement: overweight up to 120,000 lbs $125 outbound ($65 return); over 120,000 lbs $125 plus $0.04 per ton over 60 tons per mile; width up to 14 ft or height up to 14 ft 6 in $55 outbound ($35 return); beyond those $125 outbound ($65 return). If both overweight and oversize, only the overweight surcharge applies. Typical one-way totals: $75 oversize-only, $145 overweight. | OAC Rule 5501:2-1-05 (effective Nov 3, 2023) |
| Oklahoma | Oversize $40. Overweight $40 plus $10 per 1,000 lbs over legal. Both $80 plus $10 per 1,000 lbs over legal. Multi-trip $40 per month. Annual envelope $4,000. Plus a 4 percent credit card fee. | ODOT Permit Fees (OAC 730 ch. 50 addendum) |
| Oregon | $8 state administrative fee. Overweight loads add the Road Use Assessment Fee, priced per mile by weight and axle count (Form 735-9926, effective Jan 1, 2024). Counties crossed may add their own fee; check with ODOT. | ODOT Over-Dimension operations; Form 735-9926 |
| Pennsylvania | General issuance $46 (up to 14 ft wide) or $97 (over 14 ft). Overweight adds $0.04 per ton-mile of (gross minus registered weight) times Pennsylvania state-route miles. Mobile home $53 or $103. Turnpike permits are separate. | PennDOT Form M-936A (10-25); fee schedule effective Jul 1, 2025 |
| Rhode Island | Check with the state DOT | Rhode Island DOT (RIDOT) |
| South Carolina | Single trip $30. Width add-ons over 16, 18, 20 and 22 ft: $35, $40, $45, $50. Annual $100. Superload application $100; superload impact fee over 130,000 lbs $3 per 1,000 lbs. Fee schedule last revised Jul 1, 2012. | S.C. Code § 57-3-130 (via Justia); SCDOT OSOW page |
| South Dakota | $25 single trip (also sold in books of 10). Overweight adds $0.02 per ton-mile on weight above the axle-count threshold (40,000 lbs at two axles rising to 95,000 lbs at seven or more), minimum $1. Extended-period permits $60. | ARSD 70:03:01:02; SD Motor Carrier Handbook, Ch. 6 |
| Tennessee | Check with the state DOT | Tennessee DOT |
| Texas | $60 base. Highway maintenance fee: $150 (80,001 to 120,000 lbs), $225 (120,001 to 160,000), $300 (160,001 to 200,000), $375 (over 200,000). Plus $35 vehicle supervision over 200,000 lbs. Plus a $0.25 plus 2.25 percent card surcharge. Single trip up to 254,300 lbs. | TxDMV General Single-Trip Permits |
| Utah | $30 single-trip oversize (96 hours). $60 oversize and overweight non-divisible up to 125,000 lbs. Superload over 125,000 lbs: $0.012 per mile per 1,000 lbs over 80,000, minimum $80, maximum $540, with rounding rules. | Utah Code § 72-7-406 (via Justia, effective May 1, 2024) |
| Vermont | $48 single trip (7 business days). $135 blanket. Fleet $135 first tractor plus $8 each additional (maximum $1,000). Overlength single trip $34. Engineering inspection $800 to $10,000 by weight. | Vermont DMV Commercial Trucking Fees; 23 V.S.A. § 1402 |
| Virginia | Single trip $20 plus $0.30 per mile if overweight or the configuration cannot be licensed in Virginia. Mobile and manufactured homes pay a flat $1.00 instead of the mileage fee. Blanket $100 a year or $200 for two years. Superload $30 plus mileage and a damage fee. | Virginia DMV Hauling Permits (EZ Haul) |
| Washington | Single-trip OSOW (3 days): dimensional $10. Weight permits vary by excess weight per mile (RCW 46.44.0941), minimum $14. | WSDOT Permit Types and Fees; RCW 46.44.0941 |
| West Virginia | Check with the state DOT | West Virginia DOT |
| Wisconsin | Overlength only $15. Overwidth or overheight $20. Both $25. Overweight $20 (to 90,000 lbs) to $85 (140,001 to 150,000), then $85 plus $10 per 10,000 lbs over 150,000. Plus $10 per district route review and $10 per structure review. | WisDOT Form MV2600 (6/2021); Wis. Stat. § 348.25 |
| Wyoming | Check with the state DOT | WYDOT / Wyoming Highway Patrol |
32 of 51 jurisdictions verified against an official source on Nov 12, 2026. 19 rows read “Check with the state DOT” because the fee could not be verified from that state’s own official source. We do not publish third-party fee figures as fact.
Breakeven calculator: does this load pay?
Add up what the trip costs, then compare it with what the load pays. Start with the permit builder if you want the table’s base fees added up for your route, or enter your permit total directly.
Step 1 — Permit builder (optional)
Pick each state on your route. Where a state publishes one flat oversize-only base fee, it fills in automatically. Where a state prices by weight, distance or formula, or where we could not verify the fee, the box stays blank: enter the amount the state quoted you.
Permit builder total$0.00
Step 2 — The load and the trip
Example $4,500. What the broker or shipper pays for the load.
Example 800. Miles with the load on.
Example 100. Empty miles to pick up and after delivery. They still burn fuel.
Example $150. Use the builder above, or enter the total the states quoted.
Example $600. Enter the quote you were given. There is no published national escort rate.
Example $0. Route surveys, police escorts, utility work, local permits.
The EIA national average was $6.13 for the week of Nov 9, 2026. Enter the price you actually pay today.
Example 6.0. Heavy and wide loads usually run below your usual MPG.
Example $1.00. Maintenance, tires, insurance, truck payment and your pay, per mile. Use your number from our Cost Per Mile Calculator.
Break-even rate per loaded mile
Trucking Mind is not affiliated with any state department of transportation, FMCSA, the U.S. Department of Transportation or any state agency. This tool gives general information, not legal, financial or routing advice. Permit fees change and every permit is route- and load-specific: confirm the fee, the route and the escort requirements with each issuing agency before you move. Every figure the calculator shows comes from the numbers you enter: check them against your own quotes before you accept a load.
How oversize permit pricing works
Once a load passes a state’s legal size or weight limits, you need a permit from that state before the wheels turn. Legal limits are close across the country, 8 feet 6 inches wide and 80,000 pounds gross in most states, but the permit price is anything but uniform. Oregon charges an $8 administrative fee. Texas charges $60 before any weight fee. Ohio builds the price from a $20 processing charge plus a surcharge picked by whatever makes the load illegal. The table above is the only honest way to show that: each state’s own published figure, or a blank where we could not verify one.
Three things decide what you actually pay. The first is the base fee, which is what the table leads with. The second is what stacks on it: per-ton charges, per-mile charges, per-axle charges, and surcharges for width, height or weight past a threshold. Arkansas charges per ton by mileage band. Indiana charges per mile by weight band. Minnesota charges a damage-assessment fee per axle group per mile. A load that is both oversize and overweight usually pays more than either alone, though some states, Ohio and Indiana among them, charge whichever calculation is greater rather than both.
The third is the superload line. Past a state’s weight or size ceiling, the standard permit stops applying and the move goes through engineering review, with its own fee and its own timeline. Colorado’s superload permit is $800. Georgia’s Superload Plus is $500. Utah switches to a per-mile formula above 125,000 pounds. Superloads also take days or weeks to approve, which is a scheduling cost as well as a fee.
The permit itself is usually the smallest bill on an oversize move. Pilot cars, route surveys, police escorts, utility lifts and the extra fuel a slow, heavy move burns add up to far more than the state fee, and a day lost waiting on a permit or a curfew costs more than all of them. That is why the breakeven calculator counts everything: permits, escorts, surveys, fuel on every mile including deadhead, and your other operating cost per mile. The break-even rate it gives is the rate per loaded mile at which the load pays exactly what the trip costs. If the offered rate is below it, the load loses money at your current costs, however good the headline pay looks.
Two cautions belong here. First, every permit is route- and load-specific: a fee quoted for one route does not transfer to another, and a permit bought for one load does not cover the next. Second, states are not the only issuers. Counties, cities and turnpike authorities can each require their own permit and charge their own fee, and Oregon’s counties do. Budget for the local layer as well as the state one.
Frequently asked questions
How much does an oversize permit cost?
It depends on the state and the load. Oversize-only single-trip base fees run from $8 in Oregon to $60 in Texas, with most states between $15 and $40. Overweight loads add per-ton, per-mile or per-axle charges on top, and superloads cost more again. The table above gives each state’s own published figure.
Do I need a permit in every state on the route?
Yes. Each state issues its own permit for travel on its own highways, and there is no national oversize permit. A load crossing five states needs five permits, each with its own fee, route and travel conditions. Counties and cities may require their own permits as well.
What is a superload?
A load past a state’s standard permit ceiling, usually a weight or size limit the state sets for ordinary permits. Superloads go through engineering review, cost more, and take longer to approve. Colorado charges $800 for a superload permit, Georgia $500 for Superload Plus, and Utah switches to a per-mile formula above 125,000 pounds.
Why is the permit fee the smallest part of an oversize move?
Because the fee buys permission, not the move. Pilot cars, route surveys, police escorts, utility work and the extra fuel a heavy, slow move burns usually cost several times the state fee, and a day lost to a curfew or a permit delay costs more than all of them. Price the whole trip, not the permit.
What does the breakeven rate tell me?
It is the rate per loaded mile at which the load pays exactly what the trip costs: permits, escorts, surveys, fuel on every mile including deadhead, and your other operating cost per mile. Above it, the load makes money. Below it, the load loses money, however good the headline pay looks.
Official sources
Every fee in the table links to its official source in the table itself: state DOT permit pages, state statutes and administrative rules. The general references below cover the permitting systems and the federal size and weight framework.
- FHWA: Oversize/Overweight Load Permits — federal weight limits and state permit contacts
- TxDMV: General Single-Trip Permits (Texas)
- Virginia DMV: Hauling Permits
- WSDOT: Permit Types and Fees (Washington)
Also try: Cost Per Mile Calculator — find your operating cost per mile for the breakeven math. Texas Permit Wizard — which Texas permit your load needs. Bridge Formula Checker — check your axle weights before you apply.
Disclaimer: This tool is provided for general information only. It is not professional advice — verify figures from official sources before acting on them.
By Brian Carter — Last reviewed: November 2026
Why use this oversize cost calculator
This oversize cost calculator puts the state fee table and the breakeven maths in one place, so you can see whether a load pays before you apply for permits. Check your operating cost with the Cost Per Mile Calculator, then run the Bridge Formula Checker to confirm your axle weights are legal for the route.