Your truck
Miles your truck runs in a year. A truck running 120,000 miles a year needs 8 to 9 shop visits.
Your chassis maker sets the ladder. Check your manual if you are unsure.
Your engine maker oil drain interval in miles. Find your engine in Table 2 of our semi truck PM schedule guide.
The date of your last scheduled service. Defaults to today.
Leave blank if you do not track it: readings then show miles since the last service.
The due date of your next annual inspection, if you know it.
Your service costs (optional)
Your own prices only, from your shop invoices. Leave all three blank for no cost estimate. The tool holds no shop prices.
Enter your details to see your next service.
Your schedule for the next 12 months
| Date | Service | Odometer | Oil change |
|---|
Odometer readings are estimates from your annual miles at a steady rate. Services nest: a B-service includes the A-service work and a C-service includes the B-service work.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only and is not professional advice. Service intervals come from the chassis and engine maker tables named on this page. Check your own manuals before you act.
Quick answer: a PM schedule is a dated plan of A, B and C services for one truck, set by miles and the calendar. A truck running 120,000 miles a year needs 8 shop visits on the Freightliner, International and Mack ladder and 9 on the PACCAR ladder. Enter your annual miles, chassis ladder and last service date above to see your dated schedule for the next 12 months.
The three chassis ladders: A, B and C intervals by maker
The makers disagree on the A-service interval, so the planner offers all three ladders. On a PACCAR chassis the A-service falls at 12,500 miles, the B-service at 25,000 and the C-service at 50,000.
The Freightliner, International and Mack ladder runs 15,000 miles for an A-service, 30,000 for a B-service and 60,000 for a C-service. Volvo stretches the A-service to 20,000 miles on current engines, with the B-service at 40,000 and the C-service at 60,000.
| Chassis maker | A-service | B-service | C-service |
|---|---|---|---|
| PACCAR (Kenworth and Peterbilt) | 12,500 | 25,000 | 50,000 |
| Freightliner, International and Mack | 15,000 | 30,000 | 60,000 |
| Volvo | 20,000 | 40,000 | 60,000 |
Neither ladder is wrong. The gap between the two short ladders is 2,500 miles: the 15,000-mile A-service runs 20 percent longer than the 12,500-mile one. Every maker publishes its own figures for its own trucks.
The right ladder for your truck is the one in your chassis maker manual. Our semi truck PM schedule guide lays out where each figure comes from, with the OEM tables behind them.
How often should a semi truck get a PM service?
A semi truck needs a PM service every 12,500 to 20,000 miles or 90 days, whichever comes first. The exact mileage depends on the chassis ladder. The 90-day calendar trigger applies to every truck.
Mileage sets the pace for a truck that runs hard, while the calendar sets the pace for a truck that sits. A truck running 120,000 miles a year reaches its mileage triggers first and needs 8 or 9 visits a year. A truck that runs low miles still needs 4 visits a year on the calendar triggers alone.
The B-service and C-service follow the same pattern at longer steps: a B-service falls at twice the A-service mileage or 6 months and a C-service falls at 50,000 to 60,000 miles or 12 months. The planner works out every date from your annual miles, so you see the full year at a glance.
How the schedule is built
Each service has two triggers: miles and the calendar. The A-service falls every 12,500 to 20,000 miles or 90 days, the B-service every 25,000 to 40,000 miles or 6 months and the C-service every 50,000 to 60,000 miles or 12 months. Whichever trigger comes first sets the date.
Services nest inside each other. Every B-service includes the A-service work and every C-service includes the B-service work, so a B-service replaces the A-service that would fall then and a C-service replaces the B-service.
If a higher service falls due within 14 days after a lower visit, the planner pulls it into the earlier visit. No driver makes two shop trips days apart for work one visit can cover.
The schedule assumes each service happens on its due date. If your last service was some time ago, the planner shows the missed service as overdue and builds forward from there.
Odometer readings are estimates from your annual miles at a steady rate. A truck that runs hard for three months and then sits will reach its mileage triggers sooner than the dates show.
Hours matter too for trucks that idle or work the city. Cummins sets a 500-hour A-service trigger for vocational work, so a truck that reaches 500 engine hours long before its mileage trigger should come in on hours, not miles.
What each service covers
A-service: the basic scheduled service
An A-service is the basic scheduled service: oil and filter change, chassis grease, fluid levels, brake adjustment and a general inspection of lights and reflectors.
B-service: filters and driveline
A B-service includes all the A-service work plus the fuel filter, the air filter, a coolant test and a driveline check. It falls at twice the A-service mileage.
C-service: the major annual service
A C-service is the major annual service: it includes all the B-service work plus the long-interval jobs such as valve lash, DPF service, a coolant change and a full brake service.
DPF service and the DEF filter sit with the C-service work. Book the C-service for the month before the annual inspection is due, so the shop finds the defects and the inspector does not.
Oil changes: set the interval for your engine
Oil change intervals come from the engine maker, not the chassis maker. For Class 8 engines from 2020 onward, the makers list 20,000 miles at the severe end and 75,000 miles at the line haul end, with a 12-month cap either way.
The shortest figure on any current Class 8 table is the International A26 severe-duty figure of 20,000 miles. The longest is 75,000 miles, listed by Detroit for the DD15, Cummins for the X15 and PACCAR for the MX-13 on line haul work.
The planner defaults to 25,000 miles, the Cummins X15 severe-duty figure. A line haul truck runs far longer between oil changes, so set the interval from your engine maker table for your duty cycle.
Poor fuel economy, long idle hours and short trips all move a truck into the severe column, where the interval can drop below half the line haul figure.
Synthetic oil alone buys no extra miles between changes. Cummins states in the same guide that synthetic and semi-synthetic oils give no extension to oil drain intervals.
What PM visits cost over a year
The cost estimator uses your prices only. Enter what your shop charges per A-service, B-service and C-service and the planner multiplies each price by the number of visits of that type in the next 12 months.
No shop price is stored in the tool. Prices vary by shop, region and truck age, so any stored figure would be wrong for most drivers within a year.
To budget for the visits across the year, use our Maintenance Reserve Calculator. It works out the monthly reserve for one truck from your annual miles and the age of the truck.
Who this planner helps
An owner-operator with one truck gets the full year on one page: every service date, every odometer reading and the cost of the year. The dated schedule makes it easy to book shop time around loads instead of losing a day to a walk-in visit.
A small fleet can run the planner once per truck and keep the copied summaries with the maintenance file. Dated records show the systematic programme that section 396.3 asks for. They make the next service easy to hand to any driver or shop.
A driver buying a used truck can check what the first year of services looks like before the deal closes. Enter the miles the truck will run and the date of its last service to see the visits ahead. Between services, the daily pre-trip inspection catches the faults a schedule cannot predict.
A new carrier setting up a maintenance programme can start here and keep the records from day one. Our new-entrant safety audit quiz checks how ready the rest of the operation is. The cost estimate from the planner sits beside fuel and tolls in the monthly books, where our owner-operator expense tracker keeps running costs in one place.
The annual inspection is the hard deadline
The federal rules set no mileage interval for preventive maintenance. Section 396.3 asks only for a systematic programme: dated records and a due date for every job.
The one hard deadline is the annual inspection. Under section 396.17(c), every Appendix A component must pass inspection at least once in the preceding 12 months. The proof must travel on the vehicle.
Keep the inspection report for 14 months from the inspection date. Hold the maintenance records for 1 year at the place where the vehicle is housed. Keep them for 6 months more after it leaves your control.
Enter your inspection due date above and the planner shows it beside the schedule. A C-service in the month before the inspection is the cheapest way to pass it first time.
How to use this planner
Six steps and one schedule. No account and no email needed.
- Enter your annual miles: the miles your truck runs in a year, from your logs or your ECM readout.
- Pick your chassis ladder: PACCAR, Freightliner International Mack or Volvo, from your chassis maker manual.
- Set your oil change interval from your engine maker table for your duty cycle, or leave the 25,000-mile default.
- Enter your last A-service date and the odometer reading at that service, if you track it.
- Add your annual inspection due date and your service costs, if you want the inspection line and the cost estimate.
- Read your next service, your visit count and your dated schedule, then copy the summary for your records.
PM schedule planner questions
How many PM visits does a truck need each year?
It depends on annual miles and the chassis ladder. A truck running 120,000 miles a year needs 8 shop visits on the Freightliner, International and Mack ladder and 9 on the PACCAR ladder. A low-mileage truck still needs 4 visits a year on the calendar triggers alone.
What is the difference between an A, B and C service?
An A-service is the basic service: oil and filter, chassis grease, fluid levels and a general inspection. A B-service includes all the A-service work plus filters and a driveline check. A C-service is the major annual service: it includes all the B-service work plus valve lash, DPF service and a coolant change.
Which ladder does my truck use?
Your chassis maker manual sets it. PACCAR trucks run a 12,500-mile A-service, Freightliner, International and Mack trucks run 15,000 miles and Volvo trucks run up to 20,000 miles on current engines. The planner defaults to the Freightliner, International and Mack ladder.
What oil change interval should I enter?
Follow your engine maker table for your duty cycle. For a 2020 or newer Class 8 engine the span runs 20,000 miles at the severe end to 75,000 miles for line haul, capped at 12 months. The 25,000-mile default is the Cummins X15 severe-duty figure.
Does the calendar matter if my truck runs low miles?
Yes. Each service has a calendar trigger as well as a mileage trigger: 90 days for an A-service, 6 months for a B-service and 12 months for a C-service. A parked truck still needs its A-service at 90 days: oil ages and seals dry out even when the truck never moves.
Where do the service costs come from?
From you. The planner holds no shop prices: enter what your shop charges per A-service, B-service and C-service and it multiplies each price by the number of visits of that type. Leave all three blank and the planner shows no cost estimate at all.
Can synthetic oil extend my oil change interval?
No. Cummins states that synthetic and semi-synthetic oils give no extension to oil drain intervals. Set the interval from your engine maker table for your duty cycle, not from the oil type.
What should I do if my truck misses a PM service date?
Book the missed service now and reset the schedule from the date it is done. The planner shows the missed service as overdue and builds the year forward from there. Keep the dated record: section 396.3 asks for a systematic programme with a due date for every job.
Related tools and guides
- Maintenance Reserve Calculator: work out the monthly reserve for one truck from your annual miles and the age of the truck
- Pre-Trip Inspection Checklist: walk through the daily driver check item by item, with out-of-service criteria flagged
- Brake Inspection Readiness Checker: cover the brake half of the annual inspection in a few minutes
- Cost Per Mile Calculator: work out your full cost per mile before you price a load
- All Trucking Mind tools: free calculators and checkers for drivers and carriers
This planner uses the reconciled A/B/C ladders and OEM oil tables checked 18 November 2026. The next review is due 17 May 2027.
Odometer readings are estimates from annual miles at a steady rate. Service costs are user entered only.
Your inputs stay in your browser. Nothing is sent to our servers.