Start the file on day one. The 30-day clock runs on consecutive days under your control. The record duty starts on day 30 whether or not the file is ready.
Answer for one vehicle or one unit of intermodal equipment. Every answer updates as you change each field.
The vehicle
The 30 days must be consecutive days under your control. A private motor carrier of passengers (nonbusiness) is excepted from the section 396.3(b) records duty. An intermodal equipment provider keeps records for each unit tendered or intended for tender, with no 30-day test.
The file
Tire size is no longer part of the vehicle identification. FMCSA removed it from section 396.3(b)(1) on July 21, 2026. Older checklists that still ask for tire size are out of date.
The condition
The dates
Enter a date to see the keep-until date for that record type. Leave a date blank to see the rule without a date.
Maintenance file complete, no gaps found
Every section 396.3(b) record item is in place. The records are kept where the vehicle is housed or maintained, with no lubrication or unsafe-condition problem reported.
The checks
| Check | Result | Detail |
|---|---|---|
| Records duty, 49 CFR 396.3(b) | Required | Records are required for each motor vehicle controlled for 30 consecutive days. This vehicle has been under your control for 120 days. |
| Vehicle identification, 396.3(b)(1) | Present | Company number if so marked, make, serial number and year are in the file. Tire size is no longer required. |
| Nature and due date of operations, 396.3(b)(2) | Present | The file shows the nature and due date of the inspection and maintenance operations to be performed. |
| Inspection, repair and maintenance log, 396.3(b)(3) | Present | The file records inspections, repairs and maintenance with their date and nature. |
| Pushout-window test records, 396.3(b)(4) | Not a bus | Section 396.3(b)(4) applies to buses only. |
| Records location, 396.3(c) | Correct | Records are kept where the vehicle is housed or maintained. |
| Lubrication, 49 CFR 396.5 | OK | The vehicle is properly lubricated and free of oil and grease leaks. |
| Unsafe operation, 49 CFR 396.7 | OK | No unsafe condition reported. |
The retention calendar
| Record | Keep until | Status |
|---|---|---|
| Maintenance records, 396.3 1 year where housed or maintained, plus 6 months after the vehicle leaves control | Keep on file | Keep, vehicle still in control |
| Periodic inspection report, 396.21 14 months from the date of the inspection report | Enter the last inspection date | Enter the date to see the keep-until date |
| Roadside inspection certification, 396.9(d)(3) Certify within 15 days of the inspection | Enter the last roadside inspection date | Enter the date to see the certification deadline |
| Roadside inspection report copy, 396.9(d)(3) 12 months from the date of the inspection | Enter the last roadside inspection date | Enter the date to see the keep-until date |
| Driver vehicle inspection reports, 396.11 3 months from the date the report was prepared | Enter the latest DVIR date | Enter the date to see the keep-until date |
| Inspector qualification evidence, 396.19 and 396.25 While the person inspects or is employed, plus 1 year after | Enter the date the inspector last inspected | Enter the date to see the keep-until date |
The 90-day bus schedule
| Test | Date | Status |
|---|---|---|
| The 90-day pushout-window schedule applies to buses only. | ||
Action items
- File is complete. Review the retention calendar each month and keep the records where the vehicle is housed or maintained.
Notes
- Tire size is no longer part of the vehicle identification in section 396.3(b)(1). FMCSA removed it on July 21, 2026 (FR Doc 2026-14701), so older checklists that still ask for tire size are out of date.
- Records may be kept electronically under 49 CFR 390.32 if they accurately reflect the required information, can be retained and can be accurately reproduced on demand.
- Retention periods are federal minimums. Keep records longer when a claim, an audit or a legal hold applies.
This checker applies 49 CFR Part 396 to your answers. It is not legal advice. Confirm the record facts with the vehicle file before you rely on a result.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not legal advice โ check the current regulation and your company policy before you rely on a result.
Quick answer: FMCSA maintenance records under 49 CFR 396.3 cover each motor vehicle a carrier controls for 30 consecutive days. The file must identify the vehicle, show the nature and due date of the work to be done and record the work that was done with its date and nature. Keep the records where the vehicle is housed or maintained for 1 year, plus 6 months after the vehicle leaves your control. This tracker checks your file against the rule and works out the keep-until date for each Part 396 record type.
What are FMCSA maintenance records?
FMCSA maintenance records are the vehicle files that 49 CFR 396.3 requires a motor carrier to keep. The rule has two halves. The first half is the program: every motor carrier and intermodal equipment provider must systematically inspect, repair and maintain every motor vehicle and unit of intermodal equipment under its control. The second half is the record: for each vehicle controlled for 30 consecutive days, the carrier must keep a file that proves the program happened.
The word that matters most is systematically. The regulation does not ask whether the trucks look fine today. It asks whether a system keeps them fine and whether the system leaves a record. A carrier with clean trucks and no files fails the rule. A carrier with complete files and a broken truck fails it too. Both halves must hold at the same time.
Parts and accessories must be in safe and proper operating condition at all times. That covers everything in Part 393 plus any additional part that may affect safety of operation. The regulation names frame and frame assemblies, suspension systems, axles and attaching parts, wheels and rims and steering systems. A defect in any of them is a maintenance failure before it becomes a roadside violation.
The maintenance file is the first thing an FMCSA investigator asks for in a compliance review. It is also the file that answers a roadside inspector who asks when the last brake job was done. A complete file turns both conversations short. A missing file turns them long and expensive.
Which vehicles need a maintenance file?
Every motor vehicle a motor carrier controls for 30 consecutive days needs a file. The count is consecutive days under your control. A truck you control for 29 days needs no file under section 396.3(b). On day 30 the duty starts. A vehicle that leaves your control and returns starts a new count, because the days must run without a break.
The rule covers trucks, tractors and trailers alike. Each vehicle in a combination needs its own file. A tractor with two trailers is three files, not one. The same applies to a vehicle you lease or borrow. Ownership does not decide the duty. Control decides it.
One exception exists. A private motor carrier of passengers (nonbusiness) is excepted from the section 396.3(b) records duty. A church bus or a company shuttle run as a nonbusiness private operation falls in that exception. The systematic maintenance duty in section 396.3(a) still applies to it, as do the lubrication rule and the unsafe-operation rule.
Intermodal equipment providers have their own version of the duty. They must keep records for each unit of intermodal equipment they tender or intend to tender to a motor carrier. The 30-day test does not apply to them. The record contents are the same four items. The retention rule is the same.
What must a maintenance file contain?
Section 396.3(b) lists four contents. The first is an identification of the vehicle: company number if so marked, make, serial number and year. If the carrier does not own the vehicle, the record must also identify the name of the person furnishing it. A leased truck with no furnisher named has an incomplete file.
The second content is a means to indicate the nature and due date of the various inspection and maintenance operations to be performed. This is the forward-looking half of the file. It shows what is due and when, not only what was done. A pile of receipts without a due-date list fails this item. The list can be a wall chart, a spreadsheet or fleet software. The form does not matter, but the due dates do.
The third content is a record of inspections, repairs and maintenance, indicating their date and nature. Every job gets a date and a description of the work. A brake relining on March 4 counts. A line that says only “service” with no date does not. The record should be detailed enough that an inspector can see what was done and when.
The fourth content applies to buses only: a record of tests conducted on pushout windows, emergency doors and emergency door marking lights. Trucks and trailers have no fourth item. A bus file without test records is incomplete even when the other three items are perfect.
Did FMCSA remove tire size from the maintenance record?
Yes. Since July 21, 2026, the vehicle identification in section 396.3(b)(1) no longer includes tire size. FMCSA removed it in the technical amendments rule published that day (FR Doc 2026-14701, Docket FMCSA-2025-0754). The agency called the requirement obsolete. The rule took effect on publication, so the change is already in force.
The old text listed tire size after the year. The current text ends at year. Many checklists, audit guides and fleet forms still ask for tire size because they were written before July 2026. Those forms are out of date on this one item. Recording tire size is still good practice for a fleet that tracks tires, but it is no longer a federal recordkeeping requirement.
This tracker follows the current text. It does not ask for tire size and does not flag a file as incomplete for lacking it. If an auditor cites tire size as a missing record item, the current regulation text is the answer. The tire rules themselves are unchanged. Tread depth, condition and load limits still apply under section 393.75.
How long must you keep maintenance records?
Section 396.3(c) sets two periods. Keep the records where the vehicle is either housed or maintained for 1 year. Then keep them for 6 months after the motor vehicle leaves your control. The two periods run one after the other. A vehicle that stays in your fleet for years keeps its records on file the whole time, while a vehicle that leaves on June 15 keeps its records until December 15.
The location matters as much as the length. The records must be kept where the vehicle is housed or maintained. A file kept only at a head office two states away from the terminal does not meet the rule when the truck lives at the terminal. The place where the truck sleeps and gets worked on is the place where the file belongs.
The 6-month tail applies however the vehicle leaves: sale, trade, end of lease or return to the owner. The reason for leaving does not change the period. The calendar in this tracker works out the keep-until date from the departure date you enter. Enter the departure date when the vehicle leaves, not months later when the file is already in a box.
These are federal minimums. Keep records longer when a claim, an audit or a legal hold applies. A crash investigation or a lawsuit can reach back further than 6 months. Destroying records on the day the minimum passes is legal, but it is unwise while any claim is open.
What is the retention period for each Part 396 record?
Part 396 sets a different clock for each record type. The maintenance records in section 396.3 run 1 year plus 6 months after the vehicle leaves control. The periodic inspection report in section 396.21 runs 14 months from the date of the report.
The roadside inspection report copy in section 396.9 runs 12 months from the date of the inspection. Driver vehicle inspection reports run 3 months. Inspector qualification evidence runs while the person inspects, plus 1 year after.
The 14-month period for the annual inspection report is longer than the 12-month inspection cycle on purpose. It guarantees that the last report is still on file when the next inspection comes due, with two months to spare. The report must be kept where the vehicle is housed or maintained and must be available on demand to an authorized official. The Annual Inspection Due-Date Tracker works out when each vehicle is due next.
The 12-month roadside period has a second duty attached. Within 15 days of the inspection, the carrier must certify that all violations noted have been corrected. The completed form goes back to the issuing State agency only if that agency asks for it. That change took effect on June 22, 2026. Before that date the return was automatic. The 12-month copy retention did not change.
The 3-month DVIR period covers the report, the certification of repairs and the certification of the driver review. Three months is short, so DVIRs turn over fast. A carrier that files DVIRs by month can purge a whole month at a time once the period passes. The DVIR Checker covers who must file, who must sign and when no-defect reports are not required.
| Record | Rule | Keep it |
|---|---|---|
| Maintenance records | 396.3(c) | 1 year where housed or maintained, plus 6 months after the vehicle leaves control |
| Periodic inspection report | 396.21(b)(1) | 14 months from the date of the report |
| Roadside inspection report copy | 396.9(d)(3) | 12 months from the date of the inspection |
| Roadside inspection certification | 396.9(d)(3) | Certify within 15 days of the inspection |
| Driver vehicle inspection reports | 396.11(a)(4) | 3 months from the date the report was prepared |
| Inspector qualification evidence | 396.19(b), 396.25(e) | While inspecting or employed, plus 1 year after |
What is the 90-day bus pushout-window rule?
Section 396.3(a)(2) requires pushout windows, emergency doors and emergency door marking lights in buses to be inspected at least every 90 days. Section 396.3(b)(4) requires a record of the tests. The two paragraphs work together: test every 90 days and write each test down. A test with no record counts for nothing in a compliance review.
Ninety days is a maximum gap, not a target. A bus tested on January 1 is due again by April 1. A bus tested on January 1 and again on April 5 has a 5-day gap in compliance. The calendar in this tracker shows the next four test dates from the last test date you enter, so a fleet can plan the whole year in one view.
The rule covers three items on every bus: the pushout windows, the emergency doors and the emergency door marking lights. All three must work. A pushout window that sticks, an emergency door that jams or a marking light that is dark is a defect to fix and record. The test record should show the date and the result for each item.
What does section 396.5 require for lubrication?
Section 396.5 is two lines long. Every motor carrier must ensure that each motor vehicle under its control is properly lubricated and free of oil and grease leaks. That is the whole rule. Short rules are easy to overlook. This one is overlooked often.
Properly lubricated means the lubrication schedule in the carrier maintenance program is followed. The regulation sets no interval. The manufacturer sets the interval and the carrier program adopts it. A truck past its grease interval is not properly lubricated, even when nothing has broken yet.
Free of oil and grease leaks means what it says. A slow seep at a fitting is a leak. A wet underside is a leak. Leaks are also a roadside inspection item, so a leak found in the yard is cheaper than the same leak found at a scale. Fix leaks when they appear and record the repair in the maintenance log.
When must a vehicle be taken out of service under section 396.7?
Section 396.7(a) forbids operating a motor vehicle in a condition likely to cause an accident or a breakdown. The test is likelihood, not certainty. A brake chamber leaking air, a steering component with visible play or a tire with cord showing all meet the test. The vehicle stays parked until the condition is repaired.
Section 396.7(b) covers the vehicle already on the highway when the unsafe condition is discovered. It may continue in operation only to the nearest place where repairs can safely be made. That move is allowed only when it is less hazardous to the public than leaving the vehicle on the highway. A truck that can limp to the next exit is different from a truck that should stop where it stands.
The unsafe-operation rule is the backstop behind every other Part 396 duty. The maintenance program exists to keep vehicles out of this condition, the DVIR exists so drivers report it and the annual inspection exists to catch it once a year. When all three fail, section 396.7 is the rule that says stop. The Pre-Trip Inspection Checklist covers the walk-around checks that catch unsafe conditions before the truck rolls.
What is a systematic maintenance program?
A systematic maintenance program is a written plan that says what gets inspected, what gets serviced, how often and who does it. Section 396.3(a) requires the program but does not write it for you. The carrier writes it from the manufacturer maintenance schedules for each vehicle, then follows it. The maintenance file is the proof that the plan was followed.
Part 396 sets no service interval for oil changes, brake checks or any other routine work. The only fixed intervals in Part 396 are the annual inspection, the 90-day bus test and the record retention periods. Everything else comes from the manufacturer and from the carrier judgment about the fleet. A carrier that adopts the manufacturer intervals and follows them has a defensible program. A carrier with no intervals at all does not.
The program must also cover who does the work. Annual inspections must be done by a qualified inspector under section 396.19. Brake work must be done under a qualified brake inspector under section 396.25.
The two qualifications are distinct. The evidence for each must be kept while the person works in that role plus 1 year after. The Inspector Qualification Checker tests whether a person meets each standard.
Building the schedule is the practical half of the program. The PM Schedule Planner builds a dated A, B and C service schedule for one truck from the intervals you enter. Use it to turn the manufacturer schedule into dated work orders, then record each completed job in the maintenance log that this tracker checks.
Can maintenance records be kept electronically?
Section 390.32 allows any person or entity required to generate, maintain or exchange documents under 49 CFR 300 through 399 to use electronic methods. Maintenance records, DVIRs, inspection reports and qualification evidence all fall in that range. Paper is not required. A digital file that meets the section 390.32 conditions satisfies the rule.
Three conditions apply. The electronic record must accurately reflect the information otherwise required. It must be capable of being retained. It must be capable of being accurately reproduced within required timeframes for reference by any party entitled to access. A record locked in a dead laptop or a format nobody can open fails the third condition.
Electronic records also need proof of consent to use electronically generated records, as required by federal electronic signature law (15 USC 7001(c)). Electronic signatures are allowed too, using any available technology that otherwise satisfies FMCSA requirements.
Since March 23, 2026, sections 396.11 and 396.13 state expressly that DVIRs may be created and maintained electronically with electronic signatures across the driver, mechanic and next-driver chain.
What happens if maintenance records are missing?
Missing records are a compliance review finding. An investigator who cannot see the maintenance file cannot verify the systematic program. The absence of records is itself a violation of section 396.3(b). The finding lands in the Vehicle Maintenance BASIC, where it affects the carrier safety score and the chance of future inspections.
Missing records also cost money at roadside. A driver who cannot show when the last annual inspection was done, or a carrier that cannot produce a repair certification for a roadside defect, faces citations that a complete file would have prevented. The file is the cheapest insurance a carrier owns. It costs paper and discipline, nothing else.
Penalty exposure follows the violation category in 49 CFR Part 386. The FMCSA Fine Calculator shows the maximum civil penalty for a recordkeeping violation and for a non-recordkeeping violation, with the exact citation. Fix the file before the review, not during it.
How is this tool different from the DOT Record Retention Checker?
This tool covers the Part 396 vehicle maintenance record family: the section 396.3 file, the annual inspection report, the roadside inspection report, DVIRs and inspector qualification evidence. Those records all answer one question: is the vehicle safe and can you prove it. The retention periods run from 3 months to 14 months, plus the 1-year and 6-month maintenance rule.
The DOT Record Retention Checker covers the drug and alcohol record family under Part 382 and the wider DOT records a carrier must keep. Those records answer a different question: was the driver tested and can you prove it. The retention periods run from 1 year to 5 years. Use both tools together. A carrier needs the vehicle file and the driver file. The two families have different clocks.
Money planning is a third job with its own tool. The Maintenance Reserve Calculator works out how much to set aside per mile for future maintenance. It plans the budget. This tracker proves the compliance. Neither replaces the other.
How do you use the Maintenance Records and Retention Tracker?
- Answer the vehicle questions: operation type, vehicle type, days under your control, ownership, furnisher and whether the vehicle is still under your control.
- Answer the file questions: vehicle identification, nature and due date of operations, the dated work log, bus test records and where the records are kept.
- Answer the condition questions: lubrication and leaks plus whether any unsafe condition exists.
- Enter the record dates to see keep-until dates: last annual inspection, last roadside inspection, latest DVIR, inspector last inspection and last bus pushout-window test.
- Read the verdict, the check table, the retention calendar, the 90-day bus schedule and the action items.
- Copy the summary for the vehicle file, or reset the tracker to start over.
Frequently asked questions
How long must a carrier keep truck maintenance records?
Keep maintenance records where the vehicle is housed or maintained for 1 year, plus 6 months after the vehicle leaves your control. That is the rule in 49 CFR 396.3(c). A vehicle that leaves on June 15 keeps its records until December 15. Other Part 396 records have their own clocks: 14 months for the annual inspection report, 12 months for the roadside inspection report copy and 3 months for DVIRs.
What records does 49 CFR 396.3 require?
Four items for each motor vehicle controlled for 30 consecutive days: vehicle identification (company number if so marked, make, serial number and year, plus the furnisher name when the carrier does not own the vehicle), a means to indicate the nature and due date of the inspection and maintenance operations to be performed, a record of inspections, repairs and maintenance with their date and nature. For buses, add a record of pushout-window, emergency-door and emergency-door-marking-light tests.
Is tire size still required in the maintenance file?
No. FMCSA removed tire size from section 396.3(b)(1) on July 21, 2026 (FR Doc 2026-14701), calling the requirement obsolete. The vehicle identification now ends at company number, make, serial number and year. Older checklists that still ask for tire size are out of date. Recording tire size is still good practice, but it is no longer a federal recordkeeping requirement.
How long must DVIRs be kept?
Three months from the date the written report was prepared, under 49 CFR 396.11(a)(4). The 3-month period covers the report, the certification of repairs and the certification of the driver review. Drivers are not required to prepare a report when no defect or deficiency is discovered or reported. DVIRs may be created and maintained electronically under section 390.32.
How often must bus pushout windows be tested?
At least every 90 days, under 49 CFR 396.3(a)(2). The rule covers pushout windows, emergency doors and emergency door marking lights on buses. Each test must be recorded under section 396.3(b)(4). A test with no record counts for nothing in a compliance review, so this tracker shows the next four test dates from the last test date you enter.
Can maintenance records be kept electronically?
Yes, under 49 CFR 390.32. Electronic records must accurately reflect the required information, be capable of being retained and be capable of being accurately reproduced on demand for any party entitled to access. Electronic signatures are allowed. Electronic records also need proof of consent to use electronically generated records, as required by 15 USC 7001(c).
Related tools
- DOT Record Retention Schedule Checker: work out the keep-until date for drug and alcohol records and wider DOT records.
- Annual Inspection Due-Date Tracker: track when each vehicle is due its next annual inspection under section 396.17.
- DVIR Checker: check what a driver must report, who must sign and when no-defect reports are not required.
- Inspector Qualification Checker: check whether a person is qualified to perform annual inspections or brake inspections.
- PM Schedule Planner: build a dated A, B and C service schedule for one truck, plus a PM cost estimate.
- Maintenance Reserve Calculator: work out how much to set aside per mile for future maintenance.
- Trucking Tools: browse every free calculator on Trucking Mind.
Sources
- 49 CFR 396.3, Inspection, repair and maintenance. ecfr.gov/current/title-49/section-396.3 Accessed November 19, 2026.
- 49 CFR 396.5, Lubrication; 49 CFR 396.7, Unsafe operations forbidden. ecfr.gov/current/title-49/section-396.5 ยท ecfr.gov/current/title-49/section-396.7 Accessed November 19, 2026.
- 49 CFR 396.9, Inspection of motor vehicles and intermodal equipment in operation. ecfr.gov/current/title-49/section-396.9 Accessed November 19, 2026.
- 49 CFR 396.11, Driver vehicle inspection report(s). ecfr.gov/current/title-49/section-396.11 Accessed November 19, 2026.
- 49 CFR 396.21, Periodic inspection recordkeeping requirements. ecfr.gov/current/title-49/section-396.21 Accessed November 19, 2026.
- 49 CFR 396.19, Inspector qualifications; 49 CFR 396.25, Qualifications of brake inspectors. ecfr.gov/current/title-49/section-396.19 ยท ecfr.gov/current/title-49/section-396.25 Accessed November 19, 2026.
- 49 CFR 390.32, Electronic documents and signatures. ecfr.gov/current/title-49/section-390.32 Accessed November 19, 2026.
- FMCSA, General Technical, Organizational, Conforming and Correcting Amendments to the Federal Motor Carrier Safety Regulations, FR Doc 2026-14701, published July 21, 2026 (removes tire size from 396.3(b)(1)). federalregister.gov/d/2026-14701 Accessed November 19, 2026.