Skip to main content

Trucking Mind

This invoice — shared by all offers

Example $2,000. The face value of the invoice you are factoring.

Example 30. Brokers typically pay in 30 to 45 days. Used for the annualized cost.

Example $20,000. Used only for the monthly and annual cost lines below.

Offer 1

A factor name, or leave it as Offer 1. Shown in the comparison only.

Example 90%. The share of the invoice paid to you today. Trucking factors typically advance 90 to 95%.

Reserve

The reserve follows the advance rate. Edit either one and the other follows.

Fee type

Example 3%. Typical trucking rates run 2 to 3%; the published range is 1.5 to 5%.

Fee timing

Most factors deduct fees when they release the reserve. Some deduct from the advance instead.

Non-recourse usually costs 0.5 to 2% more. If your factor quoted a higher rate for it, enter that rate above.

Extra fees on this invoice

Example $10. ACH typically $5 to $10, invoice fee $1 to $3, wire $25 to $30. Empty rows are ignored.

Total you keep from this invoice

Advance you get today
Factoring fee
Other fees
Total cost of factoring this invoice
Reserve held back
Reserve released when the broker pays
Fee timing
Effective cost, as a share of the invoice
Annualized cost
Factoring cost per month, at your volume
Factoring cost per year, at your volume

This is a simple scaling of a one-time fee. It is not an APR.

Save or export this comparison

Your numbers stay in your browser. Nothing is sent to our servers.

    Trucking Mind is not affiliated with any factoring company, broker, bank or lender. This tool gives general information, not financial, tax or legal advice. Factoring is a sale of your invoices, not a loan, and its cost depends on your contract: check the rate, the fees, the reserve and the termination terms against your own agreement before you sign or renew. Every figure this tool shows comes from the numbers you enter.

    Quick answer: Freight factoring typically costs 2 to 3 percent of each invoice for trucking, plus transfer and processing fees, and because the fee repeats every time an invoice is factored, the annualized cost is far higher than the headline rate. On a $2,000 invoice at 3 percent with $10 in fees and a 90 percent advance, you get $1,800 today, keep $1,930 in total, and pay an annualized cost of about 47 percent. Enter up to three offers above to compare them side by side on the same invoice.


    Last reviewed against official sources:

    How freight factoring works

    Factoring turns an unpaid invoice into cash today. Instead of waiting 30 to 45 days for the broker to pay, you sell the invoice to a factoring company. The factor advances most of its value, usually within 24 hours, and collects from the broker when the invoice comes due. The factor keeps a fee for the service, and the rest of the money is yours.

    The advance is not the full invoice. A trucking factor typically advances 90 to 95 percent of the invoice value on the day you submit it, and holds the remainder back as a reserve. When the broker pays the factor, the factor releases the reserve to you, minus the factoring fee and any other charges. On a $2,000 invoice at a 90 percent advance, you get $1,800 today, the factor holds $200, and when the broker pays you receive the $200 reserve minus the fee and charges.

    The headline rate is only part of the price. Published trucking factoring rates run from 1.5 to 5 percent of the invoice, with 2 to 3 percent typical for owner-operators and small fleets, according to TruckingWay’s factoring guide, updated August 28, 2026. On top of the rate sit the transfer and processing charges: ACH typically $5 to $10, an invoice fee of $1 to $3, a wire $25 to $30. A factor quoting 2 percent with $15 in fees per invoice can cost more than a factor quoting 2.5 percent with no fees, which is why this calculator adds the fees into the total before it works out the cost.

    Some factors charge a flat fee per invoice, and some charge a tiered rate that rises the longer the invoice stays unpaid. Under a tiered schedule a 2 percent fee at 30 days can become 4 percent or more at 60 or 90 days. If your contract is tiered, enter the rate that matches how long your brokers actually take to pay, not the first-tier rate in the sales pitch.

    Why the annualized cost matters

    A 3 percent fee sounds small until you count how often you pay it. Every invoice you factor carries the fee, and a carrier factoring steadily pays it roughly twelve times a year on the same rolling money. The annualized cost puts that on one number you can compare with any other way of raising cash: the total cost divided by the advance, times 365 divided by the days until the broker pays.

    On the example above, $2,000 at 3 percent with $10 in fees and a 90 percent advance, the cost is $70 on a $1,800 advance for 30 days, which annualizes to about 47 percent. Without the extra fees the same 3 percent rate annualizes to about 41 percent. A 2 percent rate at the same advance and terms annualizes to about 27 percent. Those are not the factor’s advertised numbers; they are what the same contract costs when the fee repeats all year, and they are the numbers to weigh against the cost of waiting for the broker to pay.

    There is a reason the factor does not have to show you this figure. The Consumer Financial Protection Bureau explicitly excludes factoring from its definition of covered credit transactions, so the disclosure rules that apply to traditional lenders, including APR disclosure, do not apply here. That makes the annualized figure on this page worth working out for yourself, from your own contract terms, before you sign.

    Published factoring rates and fees

    The ranges below are from TruckingWay’s Truck Factoring Guide, updated August 28, 2026. They are published ranges, not a market rate: what you are quoted depends on your volume, your brokers’ credit and whether the deal is recourse or non-recourse.

    CostLow endTypicalHigh end
    Base factoring rate1.5%2–3%4–5%
    Reserve held back0%3–5%10%
    ACH transfer fee$0–$3$5–$10$15–$25
    Invoice processing fee$0$1–$3$5+
    Wire transfer fee$15$25–$30$35+

    Source: TruckingWay, Truck Factoring Guide (updated Aug 28, 2026). Some factors advance 100% with no reserve; others hold up to 15%. Always enter your own contract’s figures in the calculator above.

    Recourse versus non-recourse

    The most important line in a factoring contract is who carries the loss if the broker never pays. In a recourse deal, the risk stays with you: if the broker defaults, you buy the invoice back or repay the advance plus fees. In a non-recourse deal, the factor absorbs the loss, but only when the broker fails because of insolvency or bankruptcy. Non-recourse almost never covers a broker who refuses to pay over a dispute, a delivery problem or missing paperwork.

    About 80 to 90 percent of factoring in the United States is recourse, according to the International Factoring Association, and recourse is cheaper because the factor carries less risk. Non-recourse typically costs 0.5 to 2 percent more than a comparable recourse deal. The extra cost buys narrow protection, not a guarantee of payment, so read the contract’s definition of a covered credit event before you pay for it.

    What to watch before you sign

    The rate is the easy part. The contract is where factoring gets expensive. Read the termination, volume and renewal clauses before you sign, and ask the factor to point to each one in writing.

    • Termination fees. Most factors charge $500 to $5,000 to leave a contract early, and some charge $2,500 to $10,000. Check the Termination section for the fee, the notice period (typically 30 to 90 days in writing) and whether the fee applies even at the end of the term.
    • Minimum volume and guaranteed fees. Many contracts require you to factor a minimum volume each month, or most or all of your invoices. Miss the minimum and you can face a flat penalty, often $300 to $500 a month. Some contracts guarantee the factor a monthly fee, so leaving early means paying the remaining months’ fees as well: on a $50,000-a-month agreement at 2 percent, leaving after eight months of a twelve-month term can mean $4,000 in guaranteed fees.
    • Auto-renewal. Evergreen clauses renew the contract for another full term unless you send written cancellation inside a narrow window, often 60 to 90 days before renewal. Miss the window and you are locked in for another year.
    • The UCC-1 lien. Factors file a blanket UCC-1 lien on all of your accounts receivable. While it is in place you generally cannot borrow against those receivables from a bank or equipment lender without the factor’s written subordination, and the lien must be formally terminated when you leave.
    • Extra fees. Beyond the rate, look for application and setup fees, monthly account fees, credit check fees, same-day funding fees, late payment penalties and fuel advance fees. Fuel advances commonly cost an extra 1 to 3 percent on top of the factoring rate.
    • Tiered rates. A rate that rises the longer an invoice stays unpaid can double your cost on a slow-paying broker. Ask for the full tier schedule in writing and work out the cost at the tier your brokers actually land in.

    Month-to-month factoring with no termination fee and no minimum volume exists, and several factors now offer it. If your volume is seasonal or you are testing factoring for the first time, a flexible contract is usually worth a slightly higher rate than a cheap rate locked into a long term.

    Frequently asked questions

    What does freight factoring cost?

    Typical trucking factoring rates run 2 to 3 percent of the invoice value, within a published range of 1.5 to 5 percent, plus transfer and processing fees such as ACH ($5 to $10 typical) and invoice fees ($1 to $3 typical). On a $2,000 invoice at 3 percent with $10 in fees, the total cost is $70.

    How do the advance and the reserve work?

    The factor advances most of the invoice value, typically 90 to 95 percent for trucking, usually within 24 hours. The rest is held as a reserve. When the broker pays the factor, the factor releases the reserve to you minus the factoring fee and any other charges.

    What is the annualized cost of factoring?

    A 3 percent fee on a 30-day invoice at a 90 percent advance works out to about 41 percent a year before other fees, and about 47 percent with $10 in fees on a $2,000 invoice. The fee repeats on every invoice you factor, so the annualized figure is the honest way to compare factoring with waiting for the broker to pay.

    What is the difference between recourse and non-recourse factoring?

    With recourse factoring, you repay the factor if the broker does not pay. With non-recourse factoring, the factor absorbs the loss, but only when the broker fails because of insolvency or bankruptcy, not over a dispute or slow payment. Non-recourse typically costs 0.5 to 2 percent more, and about 80 to 90 percent of factoring in the United States is recourse.

    What hidden fees should I look for in a factoring contract?

    The most common are termination fees of $500 to $5,000 or more, penalties for missing a monthly minimum volume, auto-renewal clauses that lock you in for another term, a blanket UCC-1 lien on your receivables, and per-invoice charges for ACH transfers, wires, processing and fuel advances. Read the termination, volume and renewal clauses before you sign.

    Can I compare more than one factoring offer?

    Yes. Add up to three offers on the same invoice.

    The comparison shows total cost, net proceeds and effective cost % for each offer. The lowest total cost is tagged, with a note that lowest cost does not mean the best deal.

    Does the calculator deduct fees from the advance or the reserve?

    By default the fees come out of the reserve release, so you get the full advance now. Some factors deduct fees from the advance instead.

    Use the fee timing switch on each offer to match your contract. The total cost stays the same. Only the split between now and later changes.

    Official sources

    Also try: Per-Mile Profit Calculator — judge what a load pays after costs. Cost Per Mile Calculator — know your cost per mile before you price a load. Dispatch Fee Calculator — work out what a dispatcher takes from each load. Detention Pay Calculator — work out what the shipper owes for your waiting time. Truck Financing Calculator — compare a loan payment with the cost of factoring.

    Related reading: What is freight factoring — how it works and when it pays. Factoring vs Quick Pay vs line of credit — three ways to get paid sooner. Factoring companies for new authority — what to look for in a first factor. Break-even rate per mile — the lowest rate you can take and still cover costs.





    What this factoring cost calculator for truckers does

    This factoring cost calculator for truckers shows the true cost of selling an invoice to a factor, not just the headline rate. You enter the invoice amount, the advance rate, the factoring fee and any extra charges, and it works out what you get today, what is held back as a reserve, what the reserve release is worth when the broker pays, and what the deal really costs you — as a dollar amount, as a share of the invoice, and as an annualised cost you can compare with other ways of getting paid sooner.

    You can compare up to three offers side by side on the same invoice, so a low rate with heavy fees and a higher rate with no fees are judged on the same numbers. Nothing you enter leaves your browser, and you can save a scenario, download it as a CSV or print it before you sign anything.

    How to use it, step by step

    1. Enter the invoice amount — the face value of the load you want to factor. The example uses $2,000.
    2. Enter how many days until the broker pays. Brokers typically pay in 30 to 45 days, and the number of days is used for the annualised cost.
    3. Enter the total value of the invoices you factor each month, so the tool can show your monthly and yearly cost at your real volume.
    4. For each offer, enter the advance rate (trucking factors typically advance 90 to 95 percent), the factoring rate or a flat fee, and any extra fees such as ACH, wire or invoice charges. Set the fee timing switch to match your contract — fees from the reserve release, or fees from the advance — and pick recourse or non-recourse.
    5. Click “Work out my true factoring cost”. The comparison tags the lowest total cost, and reminds you that the cheapest offer is not automatically the best deal — check the termination, volume and renewal clauses first.

    How it calculates your true cost

    Every figure comes from the numbers you enter, with no hidden assumptions. The method is:

    • Advance = invoice × advance rate. On a $2,000 invoice at 90 percent, the advance is $1,800 today.
    • Reserve = invoice − advance. The remaining $200 is held back and released when the broker pays, minus the fees.
    • Factoring fee = invoice × factoring rate, or the flat fee if the factor quotes it that way.
    • Total cost = factoring fee + every extra fee (ACH, wire, invoice, admin and fuel advance charges).
    • Net you keep = invoice − total cost.
    • Effective cost % = total cost ÷ invoice × 100.
    • Annualised cost = (total cost ÷ advance) × (365 ÷ days until the broker pays) × 100. This simply scales a one-off fee over a year so you can compare it with a loan or a line of credit. It is not an APR, and factoring companies are not required to disclose an APR-style figure — which is exactly why the annualised cost matters.

    Fee timing changes only the split between now and later, never the total cost. If the fees come out of the reserve, you get the full advance today and a smaller release later; if they come out of the advance, you get less today and the full reserve later.

    Worked example: two offers on the same $2,000 invoice

    Take a $2,000 invoice that the broker will pay in 30 days. Offer A charges a 3 percent fee with $10 in ACH and processing fees, at a 90 percent advance. Offer B charges a 2 percent fee with no extra fees, at a 95 percent advance.

    Offer A: advance $1,800 today, reserve $200. Factoring fee $60 plus $10 in fees is a total cost of $70, so you keep $1,930 — an effective cost of 3.5 percent. Annualised, that is about 47 percent a year. Offer B: advance $1,900 today, reserve $100. Factoring fee $40 and no extra fees is a total cost of $40, so you keep $1,960 — an effective cost of 2 percent. Annualised, that is about 26 percent a year.

    Offer B saves $30 on this one invoice. At $20,000 of invoices factored each month, Offer A costs $700 a month and $8,400 a year, while Offer B costs $400 a month and $4,800 a year — a difference of $3,600 a year for the same cash flow. Before you switch, though, check the broker first: use the USDOT MC number lookup to check the broker's authority and safety record, because no factor protects you from a disputed invoice, even on a non-recourse deal.

    Who should use it, and why it helps

    Owner-operators who need fuel money before the broker pays, new authorities whose brokers pay slowly, and small fleets comparing two or three factoring offers will get the most from it. It also helps before you sign: enter the numbers from a contract and see whether a low rate survives the extra fees, the reserve holdback and a tiered rate that climbs while an invoice stays unpaid.

    Once you know the true cost, fold it into your pricing. Add the factoring cost to your cost per mile so a load that looks profitable on paper still pays after the factor takes its share, and set aside enough from each settlement for your annual Form 2290 HVUT tax instead of discovering it at renewal time.

    By Lucas Clark — Last reviewed: November 2026.

    Follow on WhatsApp Ask by Voice