Choose your box truck size, then enter your pallets, weight per pallet and cargo cube. Check the empty weight and GVWR against your own truck: both are editable.
Your truck
25 ft 11 in x 8 ft 1 in x 8 ft 1 in inside, 1,700 cu ft, 12 pallets straight, door 7 ft 10 in x 7 ft 7 in, GVWR 26,000 lb.
Pallet count is checked against the straight count for your size. Leave the cube box blank to skip the cube check.
Enter your load to see the fit.
The rear door is smaller than the box
Check the door label on your own truck: fleet figures vary by make, model and year. The rear door opening is always smaller than the box inside: measure tall freight against the door, not the box.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not professional advice — verify figures from official sources before acting on them. Measure your own truck before you load: fleet figures vary by make, model and year.
Quick answer: Pick your size, then enter pallets, weight per pallet and cargo cube. The tool checks the pallet fit, payload, cube and gross weight against the GVWR. The example loads 10 pallets at 800 lb each into a 26 ft box truck: 8,000 lb, 1,200 cu ft of 1,700 cu ft, 24,000 lb with 2,000 lb to spare.
Box truck sizes at a glance
Eight sizes cover most box truck work, from a 10 ft local truck to a 26 ft truck that carries 12 pallets. The table gives the inside dimensions, the cubic feet, the straight pallet count, the payload and the GVWR for each size. Figures come from the rental fleets and the makers: Penske, U-Haul, Isuzu and Hengehold.
| Size | Inside L x W x H | Cube (cu ft) | Pallets | Payload (lb) | GVWR (lb) |
|---|---|---|---|---|---|
| 10 ft box truck | 9 ft 11 in x 6 ft 3 in x 6 ft 1 in | 402 | 2 | 2,850 | 8,600 |
| 12 ft box truck | 12 ft x 6 ft 6 in x 6 ft 1 in | 450 | 3 | 3,100 | 9,900 |
| 14 ft box truck | 14 ft x 7 ft 8 in x 7 ft 1 in | 760 | 6 | 6,000 | 14,500 |
| 16 ft box truck | 16 ft x 7 ft 7 in x 6 ft 6 in | 800 | 8 | 4,300 | 12,500 |
| 20 ft box truck | 19 ft 6 in x 7 ft 8 in x 7 ft 2 in | 1,016 | 8 | 5,700 | 14,500 |
| 22 ft box truck | 21 ft 11 in x 8 ft 1 in x 8 ft 1 in | 1,200 | 10 | 10,000 | 26,000 |
| 24 ft box truck | 24 ft x 8 ft x 8 ft 4 in | 1,600 | 12 | 10,000 | 26,000 |
| 26 ft box truck | 25 ft 11 in x 8 ft 1 in x 8 ft 1 in | 1,700 | 12 | 10,000 | 26,000 |
The 14 ft cube of 760 cu ft is worked out from its inside dimensions: the maker publishes no cube figure for that size. The 10 ft and 20 ft figures are U-Haul numbers.
The 12 ft, 16 ft, 22 ft and 26 ft figures are Penske numbers. The 24 ft figures are Hengehold numbers.
How many pallets fit in each size
A standard pallet is 48 in long by 40 in wide. The straight count comes from the inside length: divide it by 48 in for the rows, then put two pallets across where the width is 80 in or more and one across below that. The tool works the count out from the inside dimensions of the size you pick.
Small rental trucks are narrow: a 10 ft truck is 75 in wide inside, so pallets go in one row of 2. A 12 ft truck is 78 in wide, so it takes 3.
A 16 ft truck takes 8 pallets in 4 rows of 2. A 26 ft truck takes 12 in 6 rows of 2. Turned loading fits 14 in a 26 ft truck, tight: the 97 in width leaves about 1 in to spare.
Counts are tape-measure maxima: the 16 ft and 24 ft rows fill the box exactly, with no slack for a hand truck. Plan one row less when you load by hand. Weight usually binds before the pallet count does: a full box of heavy pallets runs over payload long before it runs out of floor.
How cube and weight bind first
A box truck runs out of room or runs out of payload: whichever comes first binds the load. Light freight fills the cube first, heavy freight hits the payload first. Enter your cargo cube to see which one binds your load.
The example loads 10 pallets at 800 lb each into a 26 ft box truck: 8,000 lb of cargo, 80.0 percent of the 10,000 lb payload. The cargo takes 1,200 cu ft of 1,700 cu ft, 70.6 percent of the cube, so weight binds first. Gross weight is 24,000 lb against a 26,000 lb GVWR, with 2,000 lb to spare.
A 16 ft truck is tighter: 8 pallets at 500 lb each make 4,000 lb of cargo, 93.0 percent of the 4,300 lb payload. The cargo takes 700 cu ft of 800 cu ft, 87.5 percent of the cube, so weight binds first again. Gross weight is 12,200 lb against a 12,500 lb GVWR, with 300 lb to spare.
The 26,000 lb line: when a box truck needs a CDL
A commercial driver licence is needed when a straight truck is rated at 26,001 lb GVWR or more, under 49 CFR 383.5. The rule defines a Heavy Straight Vehicle (Group B) as a truck rated at 11,794 kilograms or more, which is 26,001 pounds or more. A 26 ft box truck at 26,000 lb sits just under the line.
That is why rental fleets rate their big trucks at 25,999 lb: U-Haul rates both its 26 ft and its 29 ft trucks at 25,999 lb maximum GVW. Isuzu rates the FTR at 25,950 lb GVWR. Penske rates its CDL 22 to 26 ft trucks at 33,000 lb GVW, with a 17,000 lb payload.
Enter your own GVWR in the tool: a 33,000 lb entry flips the CDL note to Class B. Towing a trailer changes the test: the combined rating is what counts. Check the door label for the rating that governs your truck.

The rear door is smaller than the box
The rear door opening is always smaller than the box inside: the frame takes a few inches on each side and a deeper header at the top. Measure tall freight against the door, not the box. The table gives the door opening for each size.
| Size | Rear door opening | Source |
|---|---|---|
| 10 ft box truck | 5 ft 11 in x 5 ft 7 in | U-Haul |
| 12 ft box truck | About 6 ft 1 in x 5 ft 7 in | Planning value |
| 14 ft box truck | About 7 ft 3 in x 6 ft 7 in | Planning value |
| 16 ft box truck | About 7 ft 2 in x 6 ft 0 in | Planning value |
| 20 ft box truck | 7 ft 3 in x 6 ft 5 in | U-Haul |
| 22 ft box truck | About 7 ft 8 in x 7 ft 7 in | Planning value |
| 24 ft box truck | About 7 ft 7 in x 7 ft 10 in | Planning value |
| 26 ft box truck | 7 ft 10 in x 7 ft 7 in | Budget |
Planning values take inside width less 5 in and inside height less 6 in for the frame. That rule matches the published doors within 3 in everywhere except one deep header: the U-Haul 26 ft door is 6 ft 10 in high, 11 in under the planning value for its 8 ft 3 in box. Measure your own door.
Rental fleets disagree: why the figures vary
Two trucks with the same nominal size can differ by a foot in length and several inches in width. The U-Haul 26 ft truck is 26 ft 2 in long inside, 8 ft 2 in wide and 8 ft 3 in high. Its cube is 1,682 cu ft, with a 12,859 lb maximum load.
Penske lists its 26 ft truck at 25 ft 11 in inside, 8 ft 1 in wide and 8 ft 1 in high, with 1,700 cu ft. Budget lists a 16 ft truck at 16 ft long but only 6 ft 3 in wide, with 658 cu ft. The tool uses the figures for the size you pick.
Cube figures are the published numbers, not length times width times height: a 22 ft Penske truck publishes 1,200 cu ft against 1,432 cu ft by arithmetic. Published cube already allows for wheel wells, the front wall and the roof curve. The 14 ft cube is the one derived figure: 760 cu ft from its inside dimensions.
How to use this calculator
Six steps and one result. No account and no email needed.
- Choose your box truck size: 10, 12, 14, 16, 20, 22, 24 or 26 ft.
- Enter your pallets and the weight per pallet.
- Enter your cargo cube to see whether cube or weight binds first.
- Check the empty weight and GVWR against your own truck: both are editable.
- Read the verdict: the pallet fit, the payload, the cube and the gross weight.
- Copy the summary to keep the figures with your load papers.
Box truck dimensions questions
How many pallets fit in a 26 ft box truck?
A 26 ft box truck holds 12 standard 48 by 40 in pallets loaded straight, in 6 rows of 2. Turned loading fits 14, tight: the 97 in width leaves about 1 in to spare. Weight usually binds first: 12 pallets at 800 lb each is 9,600 lb, close to the 10,000 lb payload.
Do I need a CDL to drive a 26 ft box truck?
No, if the truck is rated under 26,001 lb GVWR: most rental 26 ft trucks are rated at 25,999 lb or 26,000 lb. A truck rated at 26,001 lb or more needs a Class B CDL under 49 CFR 383.5. Towing a trailer changes the test: the combined rating is what counts.
What is the payload of a 26 ft box truck?
A 26 ft Penske truck carries a 10,000 lb payload, against a 26,000 lb GVWR and a 16,000 lb empty weight. U-Haul lists a 12,859 lb maximum load for its 26 ft truck, with a 13,140 lb empty weight. Payload is GVWR less empty weight: the door label on your own truck gives the exact figure.
How much cargo volume does a 24 ft box truck have?
A 24 ft box truck holds about 1,600 cu ft, on Hengehold figures: 24 ft long inside, 8 ft wide and 8 ft 4 in high. Narrower rental bodies hold less: some 24 ft trucks publish about 1,400 cu ft. Published cube is the number to trust, not length times width times height.
How wide is the inside of a box truck?
Small rental trucks are narrow: a 10 ft truck is 75 in wide inside and a 12 ft truck is 78 in. Commercial bodies are wider: a 14 ft truck is 92 in wide and a 26 ft truck is 97 in. Width decides the pallet pattern: two across needs 80 in or more.
What size box truck do I need for 8 pallets?
A 16 ft box truck takes 8 pallets straight, in 4 rows of 2, with 800 cu ft of cube. The rows fill the box exactly, so a 20 ft truck gives working room for the same 8 pallets. Enter your pallets and weight per pallet in the tool to check the payload as well.
Related tools and guides
- Tanker Load Calculator: work out tanker load weight, axle weights and the most you can legally load
- Step Deck Fit Calculator: check freight fit on both step deck levels plus payload
- Doubles Calculator: split pup weight, check axle groups and the bridge formula
- Dry Van Calculator: work out dry van cost per mile and check pallet count and cube against payload
- Flatbed Calculator: check flatbed load fit, axle weights and cost per mile
- Reefer Calculator: check reefer setpoints, pallet count and cube against payload, plus cost per mile
- Bridge Formula Axle Weight Checker: check any axle group against the bridge formula with your own spacings
- Cost Per Mile Calculator: put maintenance and repair costs beside fuel and insurance in your full cost per mile
- All Trucking Mind tools: free calculators and checkers for drivers and carriers
This calculator follows the size figures in the Penske, U-Haul, Isuzu and Hengehold specs and the CDL line in 49 CFR 383.5. It is guidance only.
Weight limits and size rules change. Confirm your figures with the current rule text before you rely on a single number.
Your inputs stay in your browser. Nothing is sent to our servers.