Choose your trailer size, then enter your commodity, setpoint, pallets, cargo cube and tare weights. Add your scale weights for the axle and bridge checks, plus your miles and costs for the cost per mile.
Your trailer
52 ft 3 in inside, 3,650 cu ft, 26 pallets straight. Turned loads often will not fit: the inside width is about 97 in.
Pallet count is checked against the straight count for your size. Leave the cube box blank to skip the cube check.
Your load temperature
Pick the commodity closest to your load. The setpoint check is guidance only: the setpoint your shipper writes down always wins.
Your scale weights (optional)
Scale every axle group before you roll. Leave the boxes blank to check gross weight only.
Axle spacings
Defaults suit a standard reefer rig with a day cab tractor. Measure your own rig for an exact bridge check.
Cost per mile (optional)
Rate, diesel price and every cost figure are your numbers: the tool carries no rate, diesel or cost figure of its own. Annual miles defaults to 100,000 as a starting point: change it to your own miles.
Enter your load to see the fit.
Reefer fuel is the hidden cost
A reefer burns diesel from its own tank while the truck is parked. Enter your reefer hours to see what the unit costs you per mile.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not professional advice — verify figures from official sources before acting on them. Follow the setpoint your shipper writes down: a guide range never overrules it.
Quick answer: Enter your trailer size, commodity and setpoint, pallets and cargo cube to see the temperature range, whether cube or weight binds first, plus your cost per mile. The example loads 26 pallets at 1,500 lb each: 39,000 lb of cargo, 3,300 cu ft of 3,650 cu ft, gross weight 72,000 lb with 8,000 lb to spare.
What temperature does your load need?
Pick your commodity and the tool shows its setpoint range, plus whether the setpoint you entered sits inside it. The ranges come from the O Trucking 2026 temperature guide and the Texas Reefer Solutions guide. The setpoint your shipper writes down always wins over a guide range.
| Commodity | Setpoint | Mode |
|---|---|---|
| Ice cream | -20 to -10°F | Continuous |
| Frozen food | -10 to 0°F | Continuous |
| Frozen seafood | -10°F | Continuous |
| Fresh meat and poultry | 28 to 32°F | Continuous |
| Fresh seafood | 30 to 34°F | Continuous |
| Dairy (milk, cheese) | 33 to 38°F | Continuous |
| Eggs | 33 to 38°F | Continuous |
| Deli and prepared foods | 34 to 38°F | Continuous |
| Beverages | 35 to 40°F | Cycle |
| Lettuce and leafy greens | 32 to 34°F | Cycle |
| Berries and grapes | 32 to 34°F | Cycle |
| Apples | 32 to 36°F | Cycle |
| Citrus (oranges, lemons) | 38 to 44°F | Cycle |
| Avocados | 40 to 45°F | Cycle |
| Tomatoes | 45 to 50°F | Cycle |
| Bananas | 56 to 58°F | Cycle |
| Watermelon | 50 to 60°F | Cycle |
| Potatoes | 38 to 45°F | Cycle |
| Pharma (refrigerated) | 36 to 46°F | Shipper spec |
| Cut flowers | 33 to 38°F | Shipper spec |
| Chocolate | 55 to 65°F | Shipper spec |
| Wine | 55 to 60°F | Shipper spec |
Source: O Trucking 2026 temperature guide, corroborated by Texas Reefer Solutions (updated 12 Nov 2026). Figures checked 17 Nov 2026.
Pre-cool the box 1 to 3 hours before the appointment so the load never waits on a warm trailer. Frozen loads and fresh meat run on continuous mode: the unit holds one temperature without stopping. Produce and beverages run on cycle mode: the unit starts and stops to save fuel.
The default load is dairy at a 35°F setpoint. Dairy runs 33 to 38°F, so 35°F sits inside the range. Enter your own setpoint to check it against your commodity.
Reefer sizes: narrower inside than a dry van
A reefer box is narrower inside than a dry van: insulation takes about 2 in of width on each side. The 53 ft reefer is the standard trailer for temperature-controlled freight. The 48 ft reefer suits shorter hauls and tighter docks.
| Size | Inside L x W x H | Cube (cu ft) | Pallets | Tare (lb) | Max cargo (lb) |
|---|---|---|---|---|---|
| 53 ft reefer | 52 ft 3 in x 97 in x 105 in | 3,650 | 26 | 15,000 | 44,000 |
| 48 ft reefer | 47 ft 3 in x 97 in x 104 in | 3,300 | 22 | 15,000 | 43,000 |
Source: Utility 3000R, Wabash Acutherm and Hyundai ThermoTech maker specs for the 53 ft reefer; Aztec Container and TruckTrailerGuide for the 48 ft reefer. Figures checked 17 Nov 2026.
A 53 ft reefer holds 26 standard 48 by 40 in pallets loaded straight, in two rows of 13. Turned loads often do not fit: the narrow box leaves no room for a sideways pallet. The tool checks your pallet count against the straight count for the size you choose.
Tare weights vary by maker and spec: a 53 ft reefer tares 14,000 to 15,900 lb with the unit and fuel. A 48 ft reefer tares 15,000 to 18,000 lb. The tool defaults to 15,000 lb for both: change the tare to match your own trailer.
How cube and weight bind first
A reefer fills up in two ways: by weight and by cube. Whichever limit you reach first is the one that binds. The tool tells you which one it is.
The example loads 26 pallets at 1,500 lb each, for 39,000 lb of cargo in a 53 ft reefer. The cargo takes 3,300 cu ft of the 3,650 cu ft capacity, or 90.4 percent, against 88.6 percent of the 44,000 lb payload. Cube binds first here, with 350 cu ft to spare.
With a 15,000 lb trailer and an 18,000 lb tractor, it grosses 72,000 lb, leaving 8,000 lb under the 80,000 lb limit. The load is 5,000 lb under the 44,000 lb payload.
The 48 ft reefer holds 22 pallets of the same freight, 33,000 lb of cargo, grossing 66,000 lb with the cube at 100.0 percent and the weight at 76.7 percent.
Light freight cubes out first: produce and flowers fill the trailer long before the weight limit bites. Heavy freight weighs out first: meat and beverages reach the payload limit with cube to spare. Enter your own cube to see which limit binds on your load.
Axle groups and the bridge formula
Gross weight is only half the check. Each axle group has its own limit: 20,000 lb for a single axle and 34,000 lb for a tandem under 23 CFR 658.17.
The bridge formula then caps groups of axles by their spacing. W equals 500 times the bracket of L times N over N minus 1, plus 12N, plus 36.
W is the weight in pounds. L is the distance in feet between the first and last axle of the group. N is the number of axles in the group.
The example scale ticket reads steer 11,500 lb, drives 31,000 lb and trailer tandem 29,500 lb. The three groups add to 72,000 lb, matching the gross weight.
Drives plus trailer tandem total 60,500 lb against a 68,000 lb bridge limit over 48 ft. The whole rig at 59 ft with 5 axles is capped by the 80,000 lb gross limit: the formula allows 85,000 lb.
The tool checks the steer axle against a 12,000 lb practical ceiling from tire and axle ratings. Federal law allows 20,000 lb on the steer axle, but most steer tires and axles are rated well below that. Two consecutive tandems may each carry 34,000 lb when the first to last axle distance is 36 ft or more.

On a 48 ft reefer the drive to trailer distance defaults to 35 ft. Drives plus trailer tandem span 43 ft and are capped at 68,000 lb, while the whole rig formula allows 82,000 lb over 54 ft. The tool runs both checks on every size.
The Bridge Formula Axle Weight Checker linked below runs the same formula on any axle group with your own spacings.
What the cost per mile covers
Enter your diesel price and MPG, your reefer fuel burn and hours, your washout cost and your detention hours and rate. Enter your annual insurance premium, your maintenance cost per mile and your fixed costs to see the full cost per mile. The tool adds the six parts you enter and shows the all-in figure.
Every money input is your number: the tool carries no rate, diesel or cost figure of its own. Detention pay counts in gross revenue, not in the break even rate. The break even rate is the cost of the run divided by the loaded miles.
As an example only, take 600 loaded miles plus 80 deadhead miles at a $3.50 rate, $4.75 diesel and 7.0 MPG. Add a reefer burn of 0.7 gallons an hour for 24 hours and a $75 washout. Fuel costs $0.68 a mile and reefer fuel adds $0.12, or $79.80 for the run.
Add $14,900 insurance a year, $0.25 maintenance a mile and fixed costs of $2,500 truck plus $700 trailer a month and $1,500 permits a year. Insurance adds $0.15 a mile, maintenance $0.25 and fixed costs $0.40. The washout adds $0.11, for $1.70 all-in.
The run breaks even at $1.93 a loaded mile and nets $1,136.13 after a $1,158.87 total cost. Gross revenue is $2,295.00 with 3 hours of detention at $65 an hour. Net per loaded mile is $1.89 and net per total mile is $1.67, with deadhead at 11.8 percent of miles.
A reefer burns 0.5 to 1.0 gallons of diesel an hour: about 0.4 to 0.6 cycling on chilled produce and 0.8 to 1.0 on continuous frozen work. Hot weather and a deep frozen setpoint push the burn toward 1.5 gallons an hour. The tool defaults to 0.7 gallons an hour: change it to match your unit and your load.
A washout costs $40 to $150 for most loads: a basic rinse runs $40 to $80 and a full sanitize $80 to $150. Detention pays $25 to $100 an hour after 2 free hours, with $50 common and reefer loads often at $65 to $90. Enter your own washout and detention figures: both are blank until you add them.
Reefer insurance averaged $14,900 a year in 2026, against $11,800 for a dry van, in the Truck Writers model. The reefer range runs $11,500 to $19,000 a year. A reefer breakdown endorsement, which covers a spoiled load when the unit fails, adds $1,000 to $2,500 a year.
Deadhead is the silent cost: trucks ran 16.5 percent of their non-tank miles empty in 2025, according to ATRI. Every empty mile burns fuel and time with no revenue, so the break even rate climbs as deadhead grows. Lumper fees of $100 to $500 per unload at grocery docks are not in this tool: add them to your costs.
Food safety: the rule this tool does not cover
This tool covers cost, fit and weight only. Food loads carry legal duties this tool does not check: the FDA Sanitary Transportation Rule (21 CFR Part 1, Subpart O) sets temperature-control, training and records duties for carriers of human and animal food. Read the rule text before you haul food.
Under the rule, food that needs temperature control must travel under temperature control. Shippers must give carriers the operating temperature in writing. Carriers must keep training and procedure records for 12 months.
The same rule requires clean transport equipment for food loads. Many shippers ask for a washout receipt dated within the last 24 to 72 hours. Keep the receipt with the load papers.
How to use this calculator
Six steps and one result. No account and no email needed.
- Choose your trailer size: 53 ft or 48 ft reefer.
- Pick your commodity and enter your setpoint to check it against the range.
- Enter your pallets, weight per pallet, cargo cube and tare weights.
- Enter your scale weights for the steer axle and both tandems, then check the spacings against your own rig.
- Read the verdict: the temperature check, the load fit, the axle checks and the bridge checks.
- Enter your miles, rate, reefer fuel, washout, detention and costs to see your cost per mile and net.
Reefer calculator questions
How much diesel does a reefer use per hour?
A reefer burns 0.5 to 1.0 gallons an hour in most conditions. Cycling on chilled produce takes about 0.4 to 0.6 gallons an hour, while continuous frozen work takes 0.8 to 1.0. Hot weather and a deep frozen setpoint push the burn toward 1.5 gallons an hour.
What temperature should I set for dairy?
Dairy runs 33 to 38°F. The tool defaults to a 35°F setpoint for dairy, which sits inside the range. The setpoint your shipper writes down always wins over a guide range.
How many pallets fit in a 53 ft reefer?
A 53 ft reefer holds 26 standard 48 by 40 in pallets loaded straight, in two rows of 13. Turned loads often do not fit: the narrow box leaves no room for a sideways pallet. The tool checks your pallet count against the straight count for the size you choose.
What does a washout cost?
A washout costs $40 to $150 for most loads. A basic rinse runs $40 to $80 and a full sanitize $80 to $150. Many shippers ask for a washout receipt dated within the last 24 to 72 hours.
Why is reefer insurance higher than dry van insurance?
Reefer insurance averaged $14,900 a year in 2026, against $11,800 for a dry van, in the Truck Writers model. A reefer carries cargo that spoils when the unit fails, so the cargo risk is higher. A reefer breakdown endorsement adds $1,000 to $2,500 a year on top.
Does this tool cover food safety rules?
No. This tool covers cost, fit and weight only: the FDA Sanitary Transportation Rule (21 CFR Part 1, Subpart O) sets temperature-control, training and records duties this tool does not check. Read the rule text before you haul food.
Related tools and guides
- Tanker Load Calculator: work out tanker load weight, axle weights and the most you can legally load
- Step Deck Fit Calculator: check freight fit on both step deck levels plus payload
- Doubles Calculator: split pup weight, check axle groups and the bridge formula
- Dry Van Calculator: work out dry van cost per mile and check pallet count and cube against payload
- Flatbed Calculator: check flatbed load fit, axle weights and cost per mile
- Bridge Formula Axle Weight Checker: check any axle group against the bridge formula with your own spacings
- Cost Per Mile Calculator: put maintenance and repair costs beside fuel and insurance in your full cost per mile
- All Trucking Mind tools: free calculators and checkers for drivers and carriers
This calculator follows the weight limits in 23 CFR 658.17 and the temperature ranges in the O Trucking 2026 guide. Food loads carry duties under 21 CFR Part 1, Subpart O that this tool does not check. It is guidance only.
Weight limits and size rules change. Confirm your figures with the current rule text before you rely on a single number.
Your inputs stay in your browser. Nothing is sent to our servers.