Waiting time at a well site can be off duty, plus the restart can be 24 hours instead of 34. Both breaks depend on the operation type plus the cycle. This calculator works out your off-duty waiting credit, your 14-hour window end, your remaining drive time, plus your restart end time under 49 CFR 395.1(d).
Pick your operation type plus your cycle, then enter the hours so far today. Every answer updates the result as you change each field.
Your operation
Today so far
Waiting time means time spent at a natural gas or oil well site waiting for the work to reach the next stage. For a qualifying servicing driver it counts as off duty. For other operations it counts as on-duty time.
Enter cycle hours that already exclude off-duty waiting time. Waiting time that counts as off duty never touches the 60-hour or 70-hour limit.
Rest at the well site
For a specially trained driver of a specially constructed oil-well servicing vehicle, two rest periods at the well site can add up to the equivalent of 10 consecutive hours off duty under 49 CFR 395.1(g)(2). Enter the rest periods below to check the split.
You can keep driving within the oilfield rules.
Servicing driver, 70-hour cycle: 2.0 hours of waiting time off duty, 7.0 driving hours left, 14-hour window ends 10:00 PM today.
Waiting time of 2.0 hours at the well site counts as 2.0 hours off duty, so on-duty time today is 7.0 hours. The 14-hour window ends 10:00 PM today, with 7.0 hours left in it, 7.0 driving hours left, plus 22.0 cycle hours left.
The checks
| Check | Result | Detail |
|---|---|---|
| Waiting time | Off duty | 2.0 hours of waiting time at the well site is off duty under 49 CFR 395.1(d)(2). It does not count toward the 14-hour window or the 70-hour limit. |
| 14-hour window | Within limit | 7.0 hours left in the window, which ends 10:00 PM today. |
| 11-hour driving | Within limit | 7.0 driving hours left under 49 CFR 395.3(a)(3). |
| 70-hour cycle | Within limit | 22.0 cycle hours left. |
| Restart | 24-hour restart | The oilfield 24-hour restart ends the 8-day period under 49 CFR 395.1(d)(1). Off duty at the end of this shift, it ends 3:00 PM tomorrow. |
| Oilfield sleeper | Not met | Rest at the well site totals 0.0 hours. The 395.1(g)(2) split needs two periods of at least 2 hours each, totaling at least 10 hours. |
| Short-haul exception | Not eligible | Specially trained drivers of oil-well servicing vehicles may not use the 150 air-mile short-haul exception in 49 CFR 395.1(e)(1). |
The figures
| Figure | Value | Note |
|---|---|---|
| Off-duty waiting credit | 2.0 hours | Waiting time at the well site that counts as off duty under 395.1(d)(2). |
| On-duty time today | 7.0 hours | Driving plus on-duty non-driving time, with off-duty waiting time removed. |
| 14-hour window ends | 10:00 PM today | Shift start plus 14 hours, plus off-duty waiting time, which the 14-hour calculation excludes under 395.1(d)(2). |
| Hours left in the 14-hour window | 7.0 hours | Driving is barred after the 14th hour under 395.3(a)(2). |
| Driving hours left | 7.0 hours | The 11-hour driving limit under 395.3(a)(3), minus driving so far. |
| Cycle hours left | 22.0 hours | 70-hour limit under 395.3(b), minus on-duty hours used in this cycle. |
| Restart length | 24 hours | 24 hours for oilfield drivers on a 70-hour, 8-day cycle; 34 hours otherwise. |
| Restart ends | 3:00 PM tomorrow | Off duty at the end of this shift, the restart completes at this time. |
| Rest at the well site | 0.0 hours | First rest period plus second rest period, under the 395.1(g)(2) sleeper rules. |
What to do
- Keep the log current. Record waiting time as off duty with remarks or annotations, or on a separate waiting time line.
- Plan the restart before the cycle runs out: 24 consecutive hours off duty ends the cycle.
- Annotate every waiting period on the record of duty status. 395.1(d)(2) requires remarks or annotations showing which off-duty periods are waiting time.
- The sleeper split is not met yet. Add rest at the well site until two periods of at least 2 hours each total at least 10 hours.
Notes
- The 24-hour restart ends an 8-day period only under 395.1(d)(1). On a 60-hour, 7-day cycle the standard 34-hour restart applies.
- Waiting time at the well site is off duty for specially trained drivers of specially constructed oil-well servicing vehicles. The exclusion is in the regulation itself, with no relieved-from-duty condition. Record it as off duty with remarks or annotations.
- Off-duty waiting time does not count toward the 60-hour or 70-hour limit, because it is not on-duty time. Enter cycle hours that already exclude it.
- Under 395.1(g)(2), the driver may not return to driving under the normal limits without taking at least 10 consecutive hours off duty, in the sleeper berth, or in other sleeping accommodations at the well location.
- Specially trained drivers of oil-well servicing vehicles may not use the 150 air-mile short-haul exception in 395.1(e)(1).
- The restart end time assumes the driver goes off duty at the end of this shift, after the driving, on-duty, plus waiting hours entered above.
- This calculator covers property-carrying oilfield operations under Part 395. Alaska rules, passenger-carrying rules, plus state oilfield rules differ.
This calculator applies 49 CFR 395.1(d) plus 395.1(g)(2) to the figures you enter. Confirm the result against your record of duty status plus your carrier safety department before you drive on it.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This calculator applies 49 CFR 395.1(d) plus 395.1(g)(2) to the figures you enter. It is not legal advice — check the regulation text plus your carrier safety department before you drive on the result.
Quick answer: Oilfield HOS rules give oilfield drivers two breaks from standard hours of service. Waiting time at a well site is off duty for specially trained drivers of specially constructed oil-well servicing vehicles under 49 CFR 395.1(d)(2), so it does not count toward the 14-hour window or the 60-hour or 70-hour limit. Oilfield drivers on a 70-hour, 8-day cycle can end the cycle with a 24-hour restart instead of the standard 34-hour restart under 49 CFR 395.1(d)(1). This oilfield HOS calculator works out your off-duty waiting credit, your 14-hour window end, your remaining drive time, plus your restart date from the hours you enter.
What are the oilfield HOS rules?
Oilfield HOS rules are the hours-of-service exceptions in 49 CFR 395.1(d) for drivers who work the oil and gas fields. They change two things about standard HOS. Waiting time at a well site can count as off duty instead of on duty. The cycle can end with a 24-hour restart instead of a 34-hour restart. Both changes exist because oilfield work runs on the schedule of the well, not the schedule of the road: a servicing crew can wait hours at a well site for the next stage of the job. A driver who counted every waiting hour as on-duty time would run out of hours before the work finished.
The rules split oilfield drivers into two groups. The group decides which breaks apply. Drivers who move oilfield equipment get the 24-hour restart only. Drivers of specially constructed oil-well servicing vehicles, who are specially trained for that work, get the 24-hour restart plus the waiting-time exclusion plus the oilfield sleeper berth rules in 49 CFR 395.1(g)(2). A driver who hauls general freight to an oilfield site, or who drives a standard truck that happens to visit a well site, gets neither break.
| Operation | 24-hour restart | Waiting time off duty | Oilfield sleeper split |
|---|---|---|---|
| Oilfield equipment transport, 395.1(d)(1) | Yes, 8-day cycle only | No, waiting time is on duty | No, standard sleeper rules |
| Specially constructed well-servicing vehicle, specially trained driver, 395.1(d)(2) plus 395.1(g)(2) | Yes, 8-day cycle only | Yes, at a well site | Yes, two periods of 2 hours or more, totaling 10 hours |
| General freight or standard truck at a well site | No | No | No |
Three limits stay the same for every oilfield driver. The 11-hour driving limit still applies. The 14-hour duty window still applies, although waiting time drops out of the count for qualifying servicing drivers. The 60-hour or 70-hour cycle limit still applies, although off-duty waiting time does not count toward it. The oilfield rules bend the clock around waiting time plus the restart. They do not raise the driving limit. They do not let a tired driver keep driving.
The oilfield rules sit inside the wider hours-of-service system, so they interact with the rest of Part 395. The 30-minute break rule still applies after 8 hours of driving. The sleeper berth rules still apply, with a special oilfield version for servicing drivers. The record of duty status rules still apply, with an annotation duty that is specific to waiting time. A driver who treats the oilfield rules as a general exemption from HOS will get it wrong: the rules are narrow. Each break has its own test. The HOS Calculator covers the standard limits that still bind every oilfield driver, while this calculator covers the oilfield breaks on top of them.
How does oilfield waiting time work?
Waiting time is the time a driver spends at a natural gas or oil well site waiting for the work to reach the next stage: waiting for the frac crew to finish a stage, waiting for the well to flow back, waiting for a wireline run to end. For most drivers, waiting time is on-duty time. Section 395.2 counts all time waiting to be dispatched as on-duty time, unless the motor carrier has relieved the driver from duty. Section 395.1(d)(2) changes that for one group of drivers.
A specially trained driver of a commercial motor vehicle specially constructed to service oil wells logs waiting time at a well site as off duty. The waiting time does not count as on-duty time. It does not count in the 14-hour period. It does not count toward the 60-hour or 70-hour limit, because only on-duty time counts toward those limits. The 14-hour window pauses while the driver waits, so a 3-hour wait pushes the end of the window 3 hours later. The driving limit stays 11 hours: waiting time off duty gives the driver more clock, not more driving hours.
The regulation sets one condition on the log. Waiting time must be recorded as off duty with remarks or annotations that show which off-duty periods are waiting time, or on a separate waiting time line on the record of duty status. An inspector who sees off-duty time at a well site with no annotation has no way to tell waiting time from a rest break. The annotation is what makes the exclusion visible. On an ELD, use the remarks or annotation field for each waiting period. On a paper log, write the waiting time on the remarks line or on a separate waiting time line. Keep the annotations consistent: the same words every time, so the pattern is easy to read at a roadside check.
Two limits come with the waiting-time exclusion. First, a specially trained driver of an oil-well servicing vehicle may not use the 150 air-mile short-haul exception in 49 CFR 395.1(e)(1). The regulation bars it in the same paragraph that grants the waiting-time exclusion. The short-haul exemption checker covers the short-haul conditions for drivers who are not barred. Second, the exclusion covers waiting time at a natural gas or oil well site only. Waiting time at a terminal, at a shipper, or at a staging yard away from the well site stays on-duty time unless the carrier has relieved the driver from duty under the general rule in 49 CFR 395.2. That general rule is separate from the oilfield rule. It applies to every driver. It turns on relief from duty, not on the type of vehicle. The on-duty time checker works through the general rule for waiting time, loading time, plus travel time.
A common misunderstanding is worth clearing up. Some drivers believe the waiting-time exclusion applies only when the driver is free to leave the well site. That condition does not appear in 395.1(d)(2). The regulation excludes waiting time at a well site for qualifying drivers without any relieved-from-duty test. The free-to-leave idea comes from the general 395.2 rule, which is a different provision for a different situation. Qualifying servicing drivers log waiting time as off duty because the regulation says so, not because they were free to leave. The calculator applies the rule as written: waiting time is off duty for a qualifying servicing driver, whatever the driver did during the wait.
The money side of waiting time is separate from the HOS side. Off duty on the log does not decide whether the driver is paid for the wait. Pay for waiting time is a matter for the carrier pay policy plus the employment agreement, not for Part 395. A driver who is off duty on the log can still be on the clock for pay. A driver who is on duty on the log can still be unpaid for a wait. Do not mix the two questions.
How does the oilfield 24-hour restart work?
A restart ends the cycle. Under standard HOS, any period of 7 or 8 consecutive days may end with the beginning of an off-duty period of 34 or more consecutive hours under 49 CFR 395.3(c). Oilfield drivers on a 70-hour, 8-day cycle get a shorter version: any period of 8 consecutive days may end with the beginning of an off-duty period of 24 or more successive hours under 49 CFR 395.1(d)(1). Ten hours less off duty, one day sooner back on the road.
The 24-hour restart ends an 8-day period only. That single word, 8-day, is the most common oilfield HOS mistake. A carrier that does not operate every day of the week runs a 60-hour, 7-day cycle under 49 CFR 395.3(b)(1). The oilfield 24-hour restart does not touch it. On a 60-hour cycle, only the standard 34-hour restart resets the clock. A driver who takes 24 hours off on a 60-hour cycle plus drives again is driving over the limit. The violation shows on the log the moment an inspector adds up the week. The calculator enforces this: pick the 60-hour cycle and the restart answer switches to 34 hours, with the reason shown in the checks.
Two other 24-hour restarts exist in Part 395. They work differently. Ground water well drilling drivers under 395.1(l) plus construction materials drivers under 395.1(m) can end any 7-day or 8-day period with 24 hours off duty. Only the oilfield version is limited to the 8-day period. A driver who moves between oilfield work and construction hauling must not carry the 24-hour restart across: the construction restart covers a 7-day cycle, the oilfield restart does not.
| Restart | Who can use it | Cycle it ends | Hours off duty |
|---|---|---|---|
| Standard restart, 395.3(c) | Every property-carrying driver | 7-day or 8-day | 34 |
| Oilfield restart, 395.1(d)(1) | Oilfield equipment transport plus well-servicing drivers | 8-day only | 24 |
| Ground water well drilling, 395.1(l) | Drivers of ground water well drilling rigs | 7-day or 8-day | 24 |
| Construction materials, 395.1(m) | Construction material plus equipment transport | 7-day or 8-day | 24 |
The restart clock starts when the off-duty period starts. A driver who goes off duty at 6:00 PM on Friday finishes a 24-hour restart at 6:00 PM on Saturday. The calculator works out the restart end time from the end of the shift you enter, so you can see the exact hour you can legally drive again. Plan the restart before the cycle runs out: a driver who hits 70 hours at a well site on a Friday night cannot drive home. The restart runs from the moment the driver goes off duty, not from the moment the driver reaches home. For restart planning across the whole week, the 34-Hour Restart Planner covers the standard restart plus the oilfield, well-drilling, plus construction variants, while the 60/70-hour recap calculator shows the hours that come back as old days fall off the cycle.
One more point about the restart: it ends the period, it does not erase the log. The 24 hours off duty must be consecutive. The record of duty status must show them. A restart broken by an hour of on-duty work is not a restart. The driver who takes a call from dispatch plus moves the truck during the restart has broken it. The 24-hour count starts again from the next off-duty period.
How do you use the Oilfield HOS Calculator?
The calculator needs six pieces of information. Enter them in order, top to bottom. The result updates as you type. The defaults show a typical servicing driver midway through a shift, so you can see a working result before you change anything.
- Pick your operation type: oil-well servicing vehicle, oilfield equipment transport, or not oilfield.
- Pick your cycle: 70 hours in 8 days if your carrier operates every day of the week, or 60 hours in 7 days if it does not.
- Enter your shift start time, your driving hours, your on-duty hours, plus your waiting hours so far today.
- Enter the on-duty hours used in this cycle so far, including today.
- If you drive a well-servicing vehicle, enter your rest periods at the well site for the sleeper split check.
- Read the verdict, the checks, plus the restart end time. Record waiting time as off duty with remarks on your log.
The verdict answers the only question that matters at the well site: can you keep driving. A green result means every limit has room left. A tight result means a limit is close. The checks show which one. A stop result means a limit is reached. The actions list the off-duty time that fixes it. The figures table shows the working: the off-duty waiting credit, the adjusted on-duty total, the 14-hour window end as a clock time, the driving hours left, the cycle hours left, plus the restart end time.
Two entries cause most of the wrong answers. The first is the operation type: a servicing driver who picks equipment transport loses the waiting-time exclusion in the result. An equipment driver who picks servicing gains an exclusion the regulation does not give. Check the operation type against the vehicle plus the training, not against the job title. The second is the cycle hours: enter on-duty hours that already exclude off-duty waiting time, because waiting time that counts as off duty never touches the 60-hour or 70-hour limit. A cycle total that still includes waiting time understates the hours left.
What are the oilfield sleeper berth rules?
Oilfield servicing drivers get their own sleeper berth rules in 49 CFR 395.1(g)(2). A specially trained driver of a specially constructed oil-well servicing vehicle at a well location can build up the equivalent of 10 consecutive hours off duty in two ways. The first way is a single stretch: at least 10 consecutive hours of off-duty time, sleeper-berth time, or time in other sleeping accommodations at the well location. The second way is a split: two periods of rest in a sleeper berth or other sleeping accommodation at the well location, where neither period is shorter than 2 hours, plus the two periods total at least 10 hours.
The split is more flexible than the standard sleeper berth split in 395.1(g)(1). The standard split needs one period of at least 7 consecutive hours in the sleeper berth, plus a second period of at least 2 hours, totaling at least 10 hours. The oilfield split has no 7-hour anchor: two 5-hour periods qualify, as do a 3-hour period plus a 7-hour period, or a 2-hour period plus an 8-hour period. The rest can also be in other sleeping accommodations at the well location, not only in the sleeper berth of the truck. A bunkhouse or a rest trailer at the site counts, as long as it is sleeping accommodation at the well location.
| Rule | Standard sleeper split, 395.1(g)(1) | Oilfield sleeper split, 395.1(g)(2) |
|---|---|---|
| Who can use it | Any property-carrying driver with a sleeper berth | Specially trained driver of a specially constructed oil-well servicing vehicle at a well location |
| Shortest period | 2 consecutive hours | 2 hours |
| Longest period needed | At least 7 consecutive hours in the sleeper berth | None: two 5-hour periods qualify |
| Total rest needed | At least 10 hours | At least 10 hours |
| Where the rest happens | Sleeper berth, or off duty for the short period | Sleeper berth or other sleeping accommodation at the well location |
| Driving around the split | Driving before plus after each period, added together, must not exceed 11 hours | Driving before plus after each period, added together, must not exceed 11 hours |
Two conditions still bind the oilfield split. First, the driving time in the period immediately before plus after each rest period, when added together, must not exceed 11 hours. A driver who drives 8 hours, rests 5 hours, then drives 5 more hours has 13 hours of driving around one rest period, which breaks the rule. Second, the driver may not return to driving under the normal limits without taking at least 10 consecutive hours off duty, in the sleeper berth, or in other sleeping accommodations. The split is a way to build up the equivalent of 10 hours off duty, not a way around the 10-hour requirement. The calculator checks the split from the rest periods you enter: it shows whether the periods meet the test, plus how many hours short they fall if they do not.
The 14-hour calculation also changes under the oilfield sleeper rules. Qualifying rest periods of at least 2 hours, which add up with a later period to at least 10 hours, drop out of the 14-hour calculation. Shorter rest periods, plus off-duty time not spent in the sleeper berth or other sleeping accommodations, stay in the count. For the standard split, the sleeper berth split calculator works through the 7/3 rules in full.
Who qualifies for the oilfield HOS rules?
The oilfield rules turn on the vehicle plus the work, not on the job title. Two tests decide who qualifies, one for each paragraph of 395.1(d).
The first test, for the 24-hour restart, is exclusivity. Section 395.1(d)(1) covers drivers of commercial motor vehicles used exclusively in the transportation of oilfield equipment, including the stringing plus picking up of pipe used in pipelines, plus servicing of the field operations of the natural gas plus oil industry. Exclusively is the load-bearing word. A truck that hauls oilfield equipment on Monday plus general freight on Tuesday is not used exclusively in oilfield work. Its driver cannot use the 24-hour restart. A carrier that wants the restart for its fleet must keep the qualifying trucks on oilfield work only.
The second test, for waiting time plus the sleeper split, is narrower. Section 395.1(d)(2) covers specially trained drivers of commercial motor vehicles specially constructed to service oil wells. Both halves must hold: the driver must be specially trained, plus the vehicle must be specially constructed to service oil wells. Typical specially constructed vehicles include fracturing pump trucks, cementing units, wireline units, coil tubing units, plus nitrogen pumping units. A standard tractor-trailer that delivers pipe to a well site is not specially constructed to service oil wells, even if the driver waits at the site for hours. Its driver logs waiting time as on-duty time.
The regulation does not set a training syllabus or a certificate for the specially trained driver. Training means the driver is trained for the well-servicing work the vehicle performs. Carriers should keep training records that show the driver is trained for the specific servicing job: the equipment, the well-site procedures, plus the safety rules of the work. If the training is in doubt, the carrier safety department decides. A driver who is unsure should ask the safety department before logging waiting time as off duty, because an inspector who finds the driver unqualified will treat the waiting time as on-duty time. The hours will not add up.
Water plus sand hauling sits near the line. A tank truck or a pneumatic trailer that hauls water or sand to a well site is oilfield equipment transport only if the vehicle is used exclusively in that oilfield work. A standard truck that splits its week between oilfield loads plus other freight fails the exclusivity test. When the operation is close to the line, the safe move is to run standard HOS plus let the safety department rule on the exception. The HOS exemption quiz walks through the full list of Part 395 exceptions, including the oilfield rules, so a driver can check which exceptions fit the operation.
Does waiting time count toward the 60-hour or 70-hour limit?
For a qualifying servicing driver, no. The 60-hour and 70-hour limits count on-duty time only. Section 395.1(d)(2) waiting time is off-duty time. A servicing driver who waits 4 hours a day at the well site for 5 days keeps 20 hours off the cycle total. Over a full week, the waiting-time exclusion can be the difference between finishing the week legally plus running out of hours on Thursday.
For an oilfield equipment transport driver, yes. Waiting time is on-duty time for that driver, so every waiting hour counts toward the cycle limit. The same 4-hour wait that costs a servicing driver nothing costs an equipment transport driver 4 hours of cycle time. That gap is the practical reason the operation type matters so much: the same wait, at the same well site, on the same day, counts differently for the two drivers standing next to each other.
The recap works the same way for oilfield drivers as for every driver: hours come back as old days fall off the 7-day or 8-day window. A driver at 68 hours on a 70-hour cycle gains back whatever the driver worked 8 days ago, once that day drops off. The waiting-time exclusion changes the daily totals that feed the recap, not the recap math itself. The 60/70-hour recap calculator works out the hours coming back each day, which is the number that decides whether a driver can take another load or must wait for the restart.
One bookkeeping point matters here. The cycle hours you enter in this calculator must already exclude off-duty waiting time. If the log shows waiting time as off duty with remarks, the cycle total from the log already excludes it. The number is ready to enter. If the log shows waiting time as on duty because the driver has not yet applied the exclusion, subtract the waiting hours first. A cycle total that still includes off-duty waiting time understates the hours left. The calculator will warn about a limit that is not really close.
What happens if you drive past the 14-hour window?
Driving after the 14th hour after coming on duty violates 49 CFR 395.3(a)(2). At a roadside inspection, the consequence is an out-of-service order under 49 CFR 395.13(b)(1): no driver shall drive after being on duty in excess of the maximum periods permitted by Part 395. The driver stays parked until the driver can lawfully drive again under the rules, which for an 11-hour or 14-hour violation means 10 consecutive hours off duty. For a 60-hour or 70-hour violation, the driver stays parked until the cycle is compliant again, which usually means a restart. The HOS out-of-service return calculator works out the return time for each type of violation.
The money consequence sits in the civil penalty schedule in 49 CFR Part 386, Appendix B. Non-recordkeeping violations, which include driving past the hours limits, carry a maximum penalty per violation, with separate maximums for drivers plus carriers. Recordkeeping violations, which include a false log or a missing log, carry a maximum per day the violation continues, up to a cap. The FMCSA fine calculator works out the maximum exposure for a set of HOS violations. Those figures are maximums: the actual penalty is set case by case. Roadside citations under state law are separate.
The CSA consequence is separate from both. Hours-of-service violations score under the HOS Compliance BASIC in the FMCSA Safety Measurement System. The points stay on the carrier record for 24 months, weighted most heavily in the first 6 months. A pattern of 14-hour violations pushes the BASIC measure up, which can trigger an intervention. The SMS BASIC measure estimator shows how violations plus inspections feed the BASIC measure.
The practical defense is the clock, not the argument. An inspector adds up the log: shift start, driving time, on-duty time, waiting time, plus the annotations. If the waiting time is off duty with remarks, the 14-hour window stretches past it. The drive is legal. If the waiting time is on duty, or off duty with no annotation, the window closes earlier. The same drive is a violation. The annotation is the cheapest insurance in oilfield HOS: a few words on the log, written at the time, that keep the window open.
How do oilfield HOS rules differ from standard HOS?
The table below puts the oilfield rules beside standard HOS for a qualifying servicing driver. Most of the table is identical: the oilfield rules change waiting time, the restart, plus the sleeper split. They leave the rest alone.
| Rule | Standard HOS | Oilfield HOS, qualifying servicing driver |
|---|---|---|
| Driving limit | 11 hours | 11 hours, unchanged |
| Duty window | 14 consecutive hours after coming on duty | 14 hours, waiting time at a well site excluded |
| Waiting time | On duty unless the carrier relieved the driver | Off duty at a well site, with remarks or annotations |
| Cycle limit | 60 hours in 7 days or 70 hours in 8 days | Same limits, off-duty waiting time excluded |
| Restart | 34 consecutive hours off duty | 24 hours, 8-day cycle only |
| Sleeper split | 7/3 split, one period 7 hours or more in the berth | Two periods of 2 hours or more, totaling 10 hours, at the well site |
| 30-minute break | Required after 8 hours of driving | Required, the oilfield rules do not change it |
| Short-haul exception | Available if the 395.1(e)(1) conditions are met | Not available to 395.1(d)(2) drivers |
| Adverse driving | 2 extra hours to complete the run or reach safety | Same, under 395.1(b)(1) |
Two rules that drivers often mix up with the oilfield rules are worth naming. The adverse driving rule in 395.1(b)(1) adds up to 2 hours to the driving time plus the duty window when a driver meets adverse driving conditions that were not known before the trip started. It applies to oilfield drivers the same as to any driver. The adverse driving conditions checker covers it. The 16-hour exception in 395.1(o) lets a property-carrying driver extend the duty window to 16 hours once a week, if the driver returns to the normal work reporting location plus is released there. It is a separate exception with its own conditions, covered by the 16-hour short-haul exception checker. Neither rule is part of the oilfield package. Neither one changes the waiting-time exclusion.
What are the common oilfield HOS mistakes?
Most oilfield HOS violations come from a short list of mistakes. Every one of them is avoidable. Every one of them shows up on the log.
- Using the 24-hour restart on a 60-hour cycle. The oilfield restart ends an 8-day period only. On a 60-hour, 7-day cycle, only the 34-hour restart works. Check the cycle before the restart, not after it.
- Logging waiting time as off duty without qualifying. The exclusion needs a specially trained driver plus a specially constructed vehicle. An equipment transport driver who logs waiting time as off duty has a false log. The hours will not add up at inspection.
- Logging waiting time as on duty when it qualifies. The reverse mistake wastes hours. A servicing driver who logs every wait as on duty runs out of cycle hours days early, for no reason.
- Forgetting the annotation. Waiting time without remarks or annotations looks like unexplained off-duty time. The annotation is part of the rule, not a courtesy. Write it at the time, not at the end of the week.
- Using the short-haul exception as a servicing driver. Section 395.1(d)(2) bars it in plain words. A servicing driver who runs short-haul paperless logs is running without a valid record of duty status.
- Counting waiting time inside the 14-hour window. For a qualifying servicing driver, waiting time drops out of the 14-hour calculation. A driver who counts it anyway parks hours early. A driver who forgets the exclusion for an equipment transport driver drives hours late.
- Mixing up the two sleeper splits. The standard split needs a 7-hour anchor period in the berth. The oilfield split does not. A servicing driver who waits for a 7-hour period wastes rest time. A standard driver who copies the oilfield split has no valid split at all.
- Forgetting the 30-minute break. The oilfield rules do not remove the break rule. After 8 hours of driving, the driver needs a 30-minute interruption in driving status, satisfied by off-duty, sleeper-berth, or on-duty not driving time.
- Assuming the ELD handles it. Most ELDs do not apply the 395.1(d)(2) exclusion on their own. The driver must switch to off duty for the wait plus add the remark. An ELD left on duty during a 4-hour wait logs 4 on-duty hours, whatever the regulation says. If the ELD fails, the ELD malfunction countdown tracks the 8-day paper-log window.
- Keeping the log past the retention date, or throwing it away early. Carriers must retain records of duty status plus supporting documents for 6 months under 395.8(k). Waiting-time annotations are part of those records. The HOS records retention calculator works out the purge dates.
What do drivers ask about oilfield HOS?
Does oilfield waiting time count as on-duty time?
No, not for a specially trained driver of a specially constructed oil-well servicing vehicle. Under 49 CFR 395.1(d)(2), waiting time at a natural gas or oil well site is off duty for that driver. It does not count toward the 14-hour window or the 60-hour or 70-hour limit. Record it as off duty with remarks or annotations showing which off-duty periods are waiting time. For other oilfield drivers, waiting time is on-duty time unless the carrier has relieved the driver from duty under the general rule in 49 CFR 395.2.
Can I use the 24-hour restart on a 60-hour cycle?
No. The oilfield 24-hour restart ends an 8-day period only under 49 CFR 395.1(d)(1). On a 60-hour, 7-day cycle, only the standard 34-hour restart resets the clock. A driver who takes 24 hours off on a 60-hour cycle plus drives again is driving over the limit.
How do I log waiting time on an ELD?
Log the waiting period as off duty, then add a remark or annotation naming it as waiting time at the well site. Section 395.1(d)(2) requires remarks or annotations showing which off-duty periods are waiting time, or a separate waiting time line on the record of duty status. Use the same words every time so the pattern is easy to read at a roadside check.
Does the oilfield exemption remove the 30-minute break?
No. The 30-minute interruption rule in 49 CFR 395.3(a)(3)(ii) still applies after 8 hours of driving time. The oilfield rules change waiting time, the restart, plus the sleeper split. They do not change the break rule, the 11-hour driving limit, or the 14-hour window.
Can oilfield drivers use the short-haul exception?
Specially trained drivers of oil-well servicing vehicles may not use the 150 air-mile short-haul exception in 49 CFR 395.1(e)(1). Section 395.1(d)(2) bars it in the same paragraph that grants the waiting-time exclusion. Oilfield equipment transport drivers are not barred, so the short-haul exception stays available to them if the 395.1(e)(1) conditions are met.
What is the oilfield sleeper berth split?
Under 49 CFR 395.1(g)(2), a specially trained driver of a specially constructed oil-well servicing vehicle at a well location can build up the equivalent of 10 consecutive hours off duty with two rest periods in a sleeper berth or other sleeping accommodation at the well location. Neither period may be shorter than 2 hours, plus the two periods must total at least 10 hours. Unlike the standard split, no 7-hour anchor period is needed. The driving time before plus after each rest period, added together, must not exceed 11 hours.
Related tools
- HOS Calculator: track the full hours-of-service picture, including the 11-hour, 14-hour, plus 60/70-hour limits that still bind oilfield drivers.
- 34-Hour Restart Planner: plan the standard restart plus the oilfield, well-drilling, plus construction 24-hour variants.
- 60/70-Hour Recap Calculator: see the hours coming back each day as old days fall off the cycle.
- Sleeper Berth Split Calculator: work out the standard 7/3 sleeper berth split for drivers who do not qualify for the oilfield version.
- HOS Exemption Quiz: check which Part 395 exceptions fit your operation, including the oilfield rules.
- Short-Haul Exemption Checker: check the 150 air-mile short-haul conditions for drivers who are not barred from them.
Sources
- 49 CFR 395.1, Scope of rules in this part (oilfield operations 395.1(d)(1) plus 395.1(d)(2); sleeper berths 395.1(g)(2); short-haul 395.1(e); adverse driving 395.1(b)(1); 16-hour exception 395.1(o); read Nov 19, 2026)
- 49 CFR 395.2, Definitions (on-duty time, including waiting to be dispatched unless the driver has been relieved from duty; read Nov 19, 2026)
- 49 CFR 395.3, Maximum driving time for property-carrying vehicles (11-hour driving limit, 14-hour period, 30-minute interruption, 60-hour plus 70-hour limits, 34-hour restart; read Nov 19, 2026)
- 49 CFR 395.8, Driver record of duty status (ELD exceptions 395.8(a)(1)(ii)(A)(1) through (4); duty status entries; 6-month retention under 395.8(k); read Nov 19, 2026)
- 49 CFR 395.13, Drivers ordered out of service (out-of-service criteria for driving past the maximum periods; read Nov 19, 2026)