Skip to main content

Trucking Mind

Property-carrying drivers only. This calculator models the property-carrying split under 49 CFR 395.1(g)(1): 11 hours of driving inside a 14-hour window. Passenger-carrying drivers follow 395.1(g)(3): two berth periods of at least 2 hours, at most 10 hours of driving before and after, no driving after the 15th hour.

6/4 and 5/5 splits are not legal: neither period reaches 7 hours in the sleeper berth. Those splits exist only in the FMCSA split-sleeper pilot program. Try the HOS Pilot Simulator to see how the pilot rules work.

Not legal advice: this calculator checks your answers against the federal rule. Your ELD is the authoritative record of your hours. A compliance consultant should review any real case.

Enter your two rest periods with start and end times. Every answer updates as you change each field. An end time earlier than its start time means the next day, while equal start and end times mean a full 24 hours.

Your duty day

Rest period 1

Rest period 2

Legal split

Legal split: period 1 is 3h off duty and period 2 is 7h in the sleeper berth, totaling 10h. Your 14-hour window restarts from the end of period 1 and ends at 2:00 PM (next day). You have 4h of driving left after the pair.

Breakdown

Period 13h, off duty (2:00 PM to 5:00 PM)
Period 27h, in the sleeper berth (7:00 PM to 2:00 AM (next day))
Passenger-seat hoursNone entered
Total rest10h (needs 10h)
Driving before period 15h
Driving between the periods2h
Driving against the 11-hour limit7h of 11h
Driving hours remaining4h
14-hour window ends2:00 PM (next day)
Back on the road2:00 AM (next day)

Split vs straight 10-hour break

Split pairStraight 10-hour break
Back on the road2:00 AM (next day)12:00 AM (next day)
Driving hours available4h11h
14-hour window ends2:00 PM (next day)2:00 PM (next day)
Driving done between rest periods2hNone – one unbroken break

Notes on this split

    Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

    Disclaimer: This tool is provided for general information only. It is not professional advice โ€” verify figures from official sources before acting on them. Rates change often, so confirm the current rate with the official source before you rely on a figure.

    Quick answer: A legal sleeper berth split is two rest periods totaling at least 10 hours: one period of at least 7 hours in the sleeper berth plus a second period of at least 2 hours off duty or in the berth. The 14-hour window restarts from the end of the first period, with neither qualifying period counting against it. This calculator checks any pair against 49 CFR 395.1(g) and names the exact condition that fails when the pair is not legal. It also shows the recalculated window end and the driving hours left after the pair.

    Last reviewed: ยท Focus keyword: sleeper berth split calculator

    At the defaults

    The defaults describe a driver who came on duty at 6:00 AM, drove 5 hours, took a 3-hour off-duty break from 2:00 PM to 5:00 PM, drove 2 more hours, then spent 7 hours in the sleeper berth from 7:00 PM to 2:00 AM.

    The verdict is Legal split. The two periods total 10 hours, with one period of 7 hours in the sleeper berth. The 14-hour window ends at 2:00 PM the next day, with 4 hours of driving left after the pair.

    What is the split sleeper berth rule?

    A property-carrying driver must take 10 consecutive hours off duty before driving again. The split rule in 49 CFR 395.1(g)(1)(ii) offers a second way to meet that 10-hour requirement: two rest periods instead of one unbroken break.

    Four conditions must all hold at once. Each period must last at least 2 consecutive hours. One period must last at least 7 consecutive hours in the sleeper berth.

    The two periods must total at least 10 hours. Driving before and between the periods, added together, must stay within 11 hours and inside the 14-hour window.

    ConditionRuleCitation
    Each periodAt least 2 consecutive hours(g)(1)(ii)(A)
    One berth periodAt least 7 consecutive hours in the sleeper berth(g)(1)(ii)(B)
    Total restAt least 10 hours across both periods(g)(1)(ii)(C)
    Driving around the pairAt most 11 hours before and between, inside the 14-hour window(g)(1)(ii)(D)

    Either period can come first. A 7-hour sleeper berth period followed by a 3-hour break works the same as a 3-hour break followed by 7 hours in the berth. The order never changes the verdict.

    The berth itself must meet the federal standard in 49 CFR 393.76, which sets minimum size, access, ventilation and equipment rules for sleeper berths. A rest period in a berth that fails that standard does not count as sleeper berth time.

    How does the 7/3 split change your 14-hour clock?

    The split does two things to the 14-hour clock under 49 CFR 395.1(g)(1)(iii). First, the window restarts from the end of the first rest period, not from the start of the duty day. Second, neither qualifying rest period counts against the window.

    Take the defaults. The first period ends at 5:00 PM, so the new window starts then. The second period runs 7:00 PM to 2:00 AM and does not count, so the window ends at 2:00 PM the next day: 14 hours after 5:00 PM plus the 7 hours spent in the berth.

    The 11-hour driving limit restarts the same way. Driving before the first period still counts: 5 hours before plus 2 hours between leaves 4 hours after the pair. The split never creates extra driving hours.

    Check the full picture before driving on. The HOS Calculator shows the 14-hour window, the 11-hour driving limit and the 70-hour week side by side, with 30-minute break status.

    Can you split your sleeper berth 6/4?

    No. A 6/4 split fails the rule because neither period reaches 7 hours in the sleeper berth. The same failure kills a 5/5 split: two 5-hour periods total 10 hours, but neither one is a 7-hour berth period.

    Those splits exist only in the FMCSA split-sleeper pilot program, which tests shorter berth periods with enrolled drivers and carriers. Outside the pilot, the 7-hour berth minimum stands for every driver. The HOS Pilot Simulator shows how the pilot rules work.

    FMCSA may change the berth minimum through a future pilot rule. Until that happens, this calculator follows the rule as written today. Check the pilot simulator for the latest pilot terms.

    What is the difference between a 7/3 split and an 8/2 split?

    Both pairs are legal. Both total 10 hours. The difference is where the rest sits: a 7/3 split puts 7 hours in the berth, while an 8/2 split puts 8 hours there.

    The longer berth period buys more sleep in one stretch. The longer second period buys more flexible time off duty, since the second period can be off duty anywhere. Neither pair changes the driving limit or the window math.

    PairBerth timeOther restLegal?
    7/37h in the berth3h off duty or berthYes
    8/28h in the berth2h off duty or berthYes
    6/46h in the berth4h off duty or berthNo – pilot only
    5/55h in the berth5h off duty or berthNo – pilot only
    9/19h in the berth1h off duty or berthNo – second period under 2 hours

    A 9/1 pair shows the 2-hour floor at work. Nine hours in the berth clears the 7-hour test, but the 1-hour second period fails the 2-hour minimum. The pair totals 10 hours and still loses.

    How do passenger-seat hours count toward a split?

    A team driver riding in the passenger seat can count up to 3 hours of that ride toward the 10-hour total. The rule is 49 CFR 395.1(g)(1)(i)(D). The ride must sit immediately before or after a period of at least 7 consecutive hours in the sleeper berth.

    The passenger-seat hours never count toward a period length. A 6-hour berth period plus 1 hour in the passenger seat is not a 7-hour berth period. The 7 hours must be consecutive hours in the berth itself.

    Passenger-seat time also does not pause the 14-hour window. Only qualifying rest periods under (g)(1)(ii) are excluded from the window. Enter the hours in the calculator only when the ride ran right next to the 7-hour berth period.

    One worked case shows the effect. Seven hours in the berth plus 2 hours off duty totals 9 hours, which fails the 10-hour test. Add 1 hour in the passenger seat and the total reaches 10 hours, so the pair turns legal.

    What happens when a split fails?

    A failed split is not a break. The driver who drives on after a failed pair has not completed 10 hours off duty, so the driving breaks the 11-hour or 14-hour limit. The calculator names the exact condition that fails, with the fix for it.

    Driving past the limits brings a violation under 49 CFR Part 386, Appendix B. An egregious hours-of-service violation, more than 3 hours over the limit, draws penalties up to the maximum the law allows. The FMCSA Fine Calculator prices the maximum for any violation in the schedule.

    FailureExampleFix
    Period under 2 hours7h berth + 1h 30m off dutyExtend the short period to 2 hours
    No 7-hour berth period6h berth + 4h off dutyTake one period of 7 hours or more in the berth
    Total under 10 hours7h berth + 2h off dutyAdd 1 hour of rest to either period
    Driving over 11 hours9h before + 3h betweenCut 1 hour of driving, or take a full 10-hour break
    Gap over 14 hours15 hours between the periodsStart period 2 sooner, or take a full 10-hour break

    The fix is usually small. A pair that fails on total rest needs only the missing minutes added to either period. A pair that fails on driving needs a full 10-hour break instead, since driven hours cannot be undone.

    Does the split work for passenger-carrying drivers?

    Passenger-carrying drivers follow a different split rule in 49 CFR 395.1(g)(3). The equivalent there is 8 consecutive hours off duty, not 10. This calculator models property-carrying drivers only, so bus drivers should not use its verdict.

    The passenger split needs two periods of rest in the sleeper berth, neither shorter than 2 hours. Driving before and after the periods, added together, must not exceed 10 hours. No driving is allowed after the 15th hour.

    The passenger limits come from 49 CFR 395.5: 10 hours of driving after 8 consecutive hours off duty, with no driving after 15 hours on duty. A passenger split still needs both rest periods logged as sleeper berth time. Team drivers running property freight use the property rule in this calculator.

    What is the split vs a straight 10-hour break?

    A split pair always ends later than a straight 10-hour break taken from the same start. The pair holds 10 hours of rest plus the time between the periods, while the straight break holds 10 hours of rest and nothing else. The split wins on flexibility, not on speed.

    Take the defaults. A straight 10-hour break from 2:00 PM ends at midnight. The split pair ends at 2:00 AM, two hours later, but the driver drove 2 hours between the periods and kept the load moving.

    The straight break also gives a fresh 11 hours of driving. The split gives only what is left of the 11 hours after the driving before and between the periods: 4 hours at the defaults. Choose the split when the driving between the periods matters more than the fresh clock.

    Long waits at a shipper or receiver are the classic split case. A 3-hour wait becomes the short period, with a 7-hour berth period later the same day completing the pair. The Trip Time Estimator builds 10-hour rests into trip plans for drivers who prefer straight breaks.

    Worked examples

    Eight runs through the calculator show how the rule works. Each one starts from the defaults and changes the rest periods or the driving hours. The result names the condition that decides it.

    SituationResultDecided by
    7h sleeper berth, then 3h off duty; 2h driving before, 2h betweenLegal split; window ends 8:00 AM (next day); 7h driving left(g)(1)(ii)
    8h sleeper berth, then 2h off duty; 3h driving before, 2h betweenLegal split; window ends 9:00 AM (next day); 6h driving left(g)(1)(ii)
    3h off duty, then 7h sleeper berth; 5h driving before, 2h betweenLegal split; window ends 2:00 PM (next day); 4h driving left(g)(1)(ii)
    7h sleeper berth, then 1h 30m off dutyNot a legal split: period 2 under 2 hours(g)(1)(ii)(A)
    6h sleeper berth, then 4h off dutyNot a legal split: no 7-hour berth period; pilot only(g)(1)(ii)(B)
    5h sleeper berth, then 5h off dutyNot a legal split: no 7-hour berth period; pilot only(g)(1)(ii)(B)
    7h sleeper berth, then 2h off duty, plus 1h in the passenger seatLegal split; window ends 7:00 AM (next day); 7h driving left(g)(1)(i)(D)
    7h sleeper berth, then 3h off duty; 9h driving before, 3h betweenNot a legal split: 12h driving over the 11-hour limit(g)(1)(ii)(D)

    The first three rows are all legal. The order of the periods never matters: the 7-hour berth period can come first or second. Rows four to six fail on rest, while row eight fails on driving.

    Row seven shows the passenger-seat rule at work. Seven hours in the berth plus 2 hours off duty totals 9 hours on its own. One hour riding in the passenger seat lifts the total to 10 hours, so the pair turns legal.

    How do you use the Sleeper Berth Split Calculator?

    1. Enter the time you came on duty, which starts the 14-hour window.
    2. Enter the start time, end time and type of the first rest period: sleeper berth or off duty.
    3. Enter the start time, end time and type of the second rest period the same way.
    4. Enter the driving hours used before period 1 and the driving hours between the two periods.
    5. Enter any passenger-seat hours, up to 3, when the ride ran right next to the 7-hour berth period.
    6. Read the verdict, the recalculated window end and the driving hours left, then copy the summary or reset the calculator.

    Frequently asked questions

    What is the 7/3 split rule?

    The 7/3 split is a sleeper berth split under 49 CFR 395.1(g)(1)(ii): one period of at least 7 hours in the sleeper berth plus another period of at least 2 hours, totaling at least 10 hours, with the 7-hour period first or second. The 14-hour window restarts from the end of the first period. Neither qualifying period counts against it.

    Can you split your sleeper berth 6/4?

    No. A 6/4 split fails because neither period reaches 7 hours in the sleeper berth. Those splits exist only in the FMCSA split-sleeper pilot program, which tests shorter berth periods with enrolled drivers and carriers.

    Does the split reset the 11-hour driving limit?

    No. Driving before the first period still counts against the 11 hours, so the split leaves only the remainder: 11 hours minus the driving before and between the periods. Only a full 10-hour break restores the whole 11 hours.

    Can the 7-hour berth period come second?

    Yes. Either rest period can come first: a 3-hour break followed by 7 hours in the berth works the same as 7 hours in the berth followed by a 3-hour break. The 14-hour window still restarts from the end of the first period in both cases.

    Do passenger-seat hours count toward a split?

    Up to 3 hours riding in the passenger seat count toward the 10-hour total when paired with at least 7 consecutive hours in the sleeper berth, under 49 CFR 395.1(g)(1)(i)(D). The ride must run immediately before or after the berth period. Passenger-seat time never counts toward a period length and never pauses the 14-hour window.

    What is the 30-minute break rule during a split?

    The 30-minute break rule in 49 CFR 395.3(a)(3) still applies: a driver may not drive after 8 hours of driving time without at least one 30-minute interruption. A qualifying rest period of 2 hours or more satisfies that break. This calculator does not track the 8-hour driving clock, so check break status with the HOS Calculator.

    Related tools

    • HOS Pilot Simulator: try the pilot rules for 6/4 and 5/5 splits, which the standard rule does not allow.
    • HOS Calculator: check remaining hours of service: 14-hour window, 11-hour driving limit and 70-hour week.
    • Short-Haul Exemption Checker: check whether the short-haul exemption covers a run, with time records instead of a log book.
    • Trip Time Estimator: plan a truck trip with legal driving shifts, 30-minute breaks and 10-hour rests built in.
    • ELD Exemption Checker: check the 8-day rule, pre-2000 vehicles, driveaway-towaway, short-haul and FMCSA exemptions.
    • FMCSA Revoked ELD Checker: check any ELD against FMCSA revocation notices, with the replace-by deadline.
    • FMCSA Fine Calculator: price the maximum civil penalty for an hours-of-service violation under 49 CFR Part 386.
    • Trucking Tools: browse every free calculator on Trucking Mind.

    Sources

    1. 49 CFR 395.1, Scope of rules in this part, paragraphs (g)(1) to (g)(3). law.cornell.edu/cfr/text/49/395.1 Accessed November 18, 2026.
    2. 49 CFR 395.3, Maximum driving time for property-carrying vehicles. law.cornell.edu/cfr/text/49/395.3 Accessed November 18, 2026.
    3. 49 CFR 395.5, Maximum driving time for passenger-carrying vehicles. law.cornell.edu/cfr/text/49/395.5 Accessed November 18, 2026.
    4. 49 CFR 393.76, Sleeper berths. law.cornell.edu/cfr/text/49/393.76 Accessed November 18, 2026.
    5. Hours of Service of Drivers, Final Rule, 85 FR 33396, June 1, 2020, FR Doc 2020-11469, effective September 29, 2020. govinfo.gov/content/pkg/FR-2020-06-01/html/2020-11469.htm Accessed November 18, 2026.
    Follow on WhatsApp Ask by Voice