When in doubt, stop. A missed stop can cost a CDL: Table 3 to section 383.51 sets a disqualification of no less than 60 days for a first railroad crossing conviction. A stop you did not owe costs a minute.
Answer for one vehicle, one load and one crossing. Every answer updates as you change each field.
The vehicle and the load
The trigger is the placard the load requires, not the commodity name. A load below the placarding threshold needs no placard. Check the shipping papers for the hazard class.
The crossing
The inactive warning device option is a trap worth testing: FMCSA proposed an exception for it, but no final rule exists, so the stop is still required. Section 392.12 bars entering any crossing without space to clear it, whether or not a stop is required.
Stop required at this crossing
This vehicle is listed in section 392.10(a)(3)(vi). Stop 15 to 50 feet from the nearest rail, look and listen in each direction along the tracks, ascertain that no train is approaching, then cross in a gear that lets the vehicle complete the crossing without a gear change. Do not shift gears while crossing.
The checks
| Check | Result | Detail |
|---|---|---|
| Vehicle type | Cargo tank | A cargo tank motor vehicle is listed when it meets paragraph (a)(4), (a)(5) or (a)(6). |
| Placard class | Must-stop class | Class 3 Flammable liquid is listed in section 392.10(a)(3)(vi). |
| Cargo tank rule | Applies | Used for hazmat, loaded or empty is listed in section 392.10(a)(4). |
| Crossing type | Standard | A standard public grade crossing. No exemption applies. |
| Section 392.10 stop | Stop required | Listed in section 392.10(a)(3)(vi). Stop 15 to 50 feet from the nearest rail. |
| Section 392.11 slow and check | Stop rule governs | Section 392.11 covers CMVs other than those listed in section 392.10. The stop rule governs here. |
| Section 392.12 clearance | Space confirmed | Enough space to drive completely through the crossing without stopping. |
The stop procedure
- Stop 15 to 50 feet from the nearest rail.
- Look and listen in each direction along the tracks.
- Ascertain that no train is approaching.
- Cross in a gear that lets the vehicle complete the crossing without a gear change. Do not shift gears while crossing.
What to have ready
- Keep the shipping papers within the immediate reach of the driver.
- Check that the placard on the vehicle matches the shipping papers before the trip.
- Know the emergency response guide number for the placard before you need it.
- Report a malfunctioning warning device to the railroad at the emergency number posted on the sign at the crossing.
Notes
- More than one paragraph lists this vehicle: (a)(3)(vi); (a)(4) of section 392.10. Either one alone requires the stop.
- Paragraph (a)(4) covers a cargo tank used for hazmat whether it is loaded or empty. Residue in an empty tank still counts.
- A stop you did not owe costs a minute. A missed stop can cost a license: Table 3 to section 383.51 sets a disqualification of no less than 60 days for a first railroad crossing conviction.
This checker applies 49 CFR 392.10, 392.11 and 392.12 to your answers. It is not legal advice. Confirm the placard and the crossing type with the shipping papers and the signs at the crossing before you rely on a result.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not legal advice โ check the current regulation and your company policy before you rely on a result.
Quick answer: Buses carrying passengers, trucks hauling any quantity of Division 2.3 chlorine, trucks placarded for the listed hazard classes and cargo tank motor vehicles must stop at every railroad grade crossing under 49 CFR 392.10. The stop is 15 to 50 feet from the nearest rail, followed by a look and listen in each direction and a crossing in one gear with no shift. Five exemptions excuse the stop at specific crossings. This checker runs your vehicle, placard and crossing type against the rule and names the paragraph that decides your answer.
Which trucks must stop at every railroad crossing?
Four groups must stop. Every bus transporting passengers must stop. Every commercial motor vehicle transporting any quantity of Division 2.3 chlorine must stop. Every commercial motor vehicle required to be placarded for one of the listed hazard classes must stop. Every cargo tank motor vehicle that meets one of the three cargo tank rules must stop.
The rule is 49 CFR 392.10. It covers railroad tracks crossed at grade, where the road and the rails meet at the same level. A bridge over the tracks or an underpass below them is not a grade crossing, so no stop is owed there. The rule applies to commercial motor vehicles in interstate commerce. States that adopt the federal safety regulations apply the same rule to intrastate driving.
The stop is a full stop, not a slow roll. The driver stops 15 to 50 feet from the nearest rail, looks and listens in each direction along the tracks, ascertains that no train is approaching and then crosses in a gear that completes the crossing without a gear change. Shifting gears while crossing is barred.
Drivers behind the truck often do not expect the stop. A tank truck that stops on a busy road can surprise the traffic behind it. The checker above tells you whether your vehicle owes the stop, so you stop when the rule requires it and roll through when it does not.
What is the full list of placards that require a stop?
Paragraph (a)(3) of section 392.10 lists 18 classifications. A commercial motor vehicle required to be marked or placarded with any one of them must stop. The list is exact. A placard that is not on the list does not trigger the stop on its own.
| Paragraph | Classification | What it covers |
|---|---|---|
| (a)(3)(i) | Division 1.1 | Explosives with a mass explosion hazard |
| (a)(3)(ii) | Division 1.2 or 1.3 | Explosives with a projection hazard or a fire hazard |
| (a)(3)(iii) | Division 2.3 Poison gas | Toxic gases, including gases poisonous by inhalation |
| (a)(3)(iv) | Division 4.3 | Materials dangerous when wet |
| (a)(3)(v) | Class 7 | Radioactive material |
| (a)(3)(vi) | Class 3 Flammable | Flammable liquids such as gasoline |
| (a)(3)(vii) | Division 5.1 | Oxidizers |
| (a)(3)(viii) | Division 2.2 | Non-flammable compressed gases |
| (a)(3)(ix) | Division 2.3 Chlorine | Chlorine gas, placarded |
| (a)(3)(x) | Division 6.1 Poison | Poisonous materials, including pesticides |
| (a)(3)(xi) | Division 2.2 Oxygen | Oxygen, compressed or refrigerated liquid |
| (a)(3)(xii) | Division 2.1 | Flammable gases such as propane |
| (a)(3)(xiii) | Class 3 Combustible liquid | Combustible liquids such as diesel fuel |
| (a)(3)(xiv) | Division 4.1 | Flammable solids |
| (a)(3)(xv) | Division 5.1 | Oxidizers, listed a second time |
| (a)(3)(xvi) | Division 5.2 | Organic peroxides |
| (a)(3)(xvii) | Class 8 | Corrosive materials such as sulfuric acid |
| (a)(3)(xviii) | Division 1.4 | Explosives with a minor explosion hazard |
Two entries look like duplicates and are not mistakes. Division 5.1 appears twice, at (vii) and (xv); Division 2.2 appears at (viii) and again as Division 2.2 Oxygen at (xi). The regulation text carries both entries, so the checker treats both as must-stop classes.
Five common placards are missing from the list. Division 1.5 blasting agents and Division 1.6 extremely insensitive explosives do not trigger the stop on their own.
Division 4.2 spontaneously combustible materials, Division 6.2 infectious substances and Class 9 miscellaneous hazardous materials are missing too. A truck carrying one of them still stops when another paragraph applies, for example when the vehicle is a cargo tank used for hazmat.
The trigger is the placard requirement, not the commodity name. A load of a Table 2 material below the placarding threshold does not require a placard, so paragraph (a)(3) does not apply to it. Table 1 materials need a placard in any quantity. Table 2 materials need one at 1,001 pounds aggregate gross weight or more, except for bulk packagings. If you are not sure which placard a load needs, the Hazmat Placard Checker works it out from the hazard class and quantity.
Do cargo tanks have to stop even when empty?
Yes, when the tank is used for hazmat. Paragraph (a)(4) covers every cargo tank motor vehicle, whether loaded or empty, used for the transportation of any hazardous material under Parts 107 through 180. An empty tank still holds residue and vapor, so the rule does not let the stop go when the load is delivered.
Two more cargo tank rules apply with or without a placard. Paragraph (a)(5) covers a cargo tank transporting a commodity above its flashpoint at the time of loading. Paragraph (a)(6) covers a cargo tank transporting any commodity under an exemption in Part 107 Subpart B, loaded or empty. A food-grade tank or a water tank meets none of the three rules, so it does not stop on the cargo tank paragraphs.
The flashpoint test looks at the loading temperature, not the road temperature. Asphalt and molten sulfur are the classic cases: loaded hot, above the flashpoint, they trigger the stop even when the commodity is not a listed placard class. A load that cools below its flashpoint during the trip still owed the stop at loading.
The rule turns on what the tank is used for, not on what is inside it right now. A tank that carried gasoline and was never cleaned still counts as a tank used for hazmat. A tank that switches between food grade and hazmat owes the stop on the hazmat weeks and not on the food-grade weeks.
Do buses have to stop at railroad crossings?
A bus transporting passengers must stop at every grade crossing. That is paragraph (a)(1), the first item in the must-stop list. It covers school buses, transit buses, motorcoaches and any other bus carrying passengers. The number of passengers does not matter. One passenger is enough.
An empty bus does not owe the stop under paragraph (a)(1). The paragraph says transporting passengers, so a deadhead bus with no passengers aboard is outside it. The bus still slows under section 392.11 like any other commercial motor vehicle. A placarded load in the same bus would trigger the stop through paragraph (a)(3), but buses rarely carry placarded freight.
Many states add their own bus stop rules. State law can require a school bus to stop at crossings where the federal rule does not reach. State school bus laws commonly require a stop at every crossing with warning lights on. Check the state rules on your route. The checker applies the federal rule only.
A bus driver who is unsure should stop. The stop costs a minute. The passengers behind the driver are the reason the paragraph exists. No schedule is worth a crossing taken blind.
How do you stop at a railroad crossing the legal way?
Stop 15 to 50 feet from the nearest rail. That window is the whole rule: closer than 15 feet is too close, farther than 50 feet is not the stop the regulation describes. Pick a spot with a clear view down the tracks in both directions.
Look and listen in each direction along the tracks. Open the window and turn down the radio if the cab noise blocks the sound of a train. Look for a headlight and listen for a horn. At night a train headlight is the first sign. In fog or heavy rain, take extra time.
Ascertain that no train is approaching before you move. The word in the regulation is ascertain: a glance is not enough when the view is blocked by buildings, parked rail cars or vegetation. If you cannot see far enough to be sure, stay stopped and wait for a clear view or a gap in the obstruction.
Cross in a gear that lets the vehicle complete the crossing without a gear change. Pick the gear before the tracks and hold it. Do not shift gears while crossing. A missed shift on the tracks can stall the truck in the path of a train.
Check the brakes before the trip. The Pre-Trip Inspection Checklist covers the brake, light and horn checks that matter most at a crossing. Keep the emergency equipment in place while you stop: the Emergency Equipment Checker lists what section 393.95 requires on the truck.
When is a stop not required?
Paragraph (b) of section 392.10 names five crossings where a stop need not be made. The exemptions are narrow. Each one needs its exact conditions. A crossing that looks exempt but misses one condition still requires the stop.
- Streetcar crossing or industrial-switching tracks in a business district. Tracks used only for industrial switching, inside a business district as defined in section 390.5.
- Police officer or crossing flagman directing traffic to proceed. A person directing traffic at the crossing, not a sign or a signal.
- Functioning highway traffic signal showing green. The signal must work, show green and operate under a local law that permits proceeding without slowing or stopping.
- Abandoned crossing marked with an abandoned sign. The rail line must be marked as abandoned. Unused tracks with no sign do not qualify.
- Industrial or spur line crossing marked Exempt. The sign must read Exempt and must be erected by or with the consent of the appropriate state or local authority.
The green-signal exemption is the narrowest. It needs a functioning signal, a green indication and a local law that permits proceeding without slowing or stopping. A dark signal, a flashing signal or a green light without that local law does not excuse the stop. Few crossings meet all three conditions.
An exemption covers one crossing, not the route. A bus that rolls through an Exempt spur crossing still stops at the next standard crossing. Do not carry an exemption forward in your head from one crossing to the next.
The exemptions excuse the stop only. They do not excuse care. Look and listen before you cross even when no stop is required. Never enter without space to clear the far side.
What counts as a business district?
Section 390.5 defines a business district as the territory contiguous to and including a highway when, within any 600 feet along the highway, there are buildings in use for business or industrial purposes occupying at least 300 feet of frontage on one side or 300 feet collectively on both sides.
The definition matters because the streetcar and industrial-switching exemption applies only inside a business district. The same tracks outside a business district do not qualify. A lone warehouse on a rural road is not a business district. A downtown block with shops on both sides usually is.
Measure the frontage, not the feeling. Six hundred feet is about two city blocks. Three hundred feet of business frontage is about six shop fronts. When the frontage is close to the line, stop. The exemption is not worth a dispute at the roadside.
Hotels, banks and office buildings count as business buildings under the definition. The list in the regulation is open: any building in use for business or industrial purposes counts toward the frontage.
What is the proposed exception for inactive warning devices?
FMCSA proposed a sixth exemption in a notice of proposed rulemaking dated 30 May 2025. The proposal would add paragraph (b)(6) to section 392.10: a crossing equipped with an active warning device that is not in an activated state, where local law permits the vehicle to proceed across the tracks without slowing or stopping. In plain terms, gates up and lights off would mean no stop for a listed vehicle.
On 27 Mar 2026 the agency published a notification of data availability in the same docket, FMCSA-2021-0050. The notice shared Federal Railroad Administration data on vehicle and railroad collisions, rear-end CMV fatal crashes and signal failures. Comments were due by 27 Apr 2026. The data notice is not a rule. It discloses information the agency may consider in further regulatory action.
No final rule exists. The docket holds two documents only: the 2025 proposal and the 2026 data notice. The current text of section 392.10, last amended in 2019, has no paragraph (b)(6). Until a final rule is published, a listed vehicle must stop at a crossing with an inactive warning device exactly as it stops anywhere else.
The checker treats an inactive warning device as a standard crossing. If you pick that crossing type, the result still says stop, with a note explaining why. Do not treat a quiet crossing as an exempt crossing. The law has not changed.
What must other trucks do at a crossing?
Section 392.11 covers every commercial motor vehicle that is not listed in section 392.10. The driver must approach at a speed that permits a stop before the nearest rail and must not drive onto or over the crossing until due caution ascertains that the course is clear. It is a slow-down rule, not a stop rule.
Due caution means more than a glance. Slow early enough to stop if a train appears. Look both ways. Listen with the window down when the cab is loud. At a crossing with limited sight distance, slow to a crawl or stop even though the rule does not demand a full stop. The rule sets a floor, not a ceiling.
A truck that is not listed today can be listed tomorrow. A dry van with a placarded load becomes a must-stop vehicle for that trip. A cargo tank that runs food grade one week and hazmat the next owes the stop on the hazmat week. Check the load, not the truck, every time the freight changes.
The slow-down rule still carries teeth. Table 3 to section 383.51 disqualifies a CDL holder who fails to slow down and check that the tracks are clear, or who fails to stop before the crossing when the tracks are not clear. The periods match the stop offenses: no less than 60 days for a first conviction.
Can you enter a crossing when traffic is backed up?
No. Section 392.12 bars any driver of a commercial motor vehicle from driving onto a highway-rail grade crossing without sufficient space to drive completely through the crossing without stopping. The rule applies to every CMV, listed or not, stopping or slowing.
The test is space past the tracks, not space on them. Look past the crossing before you enter. If the far side cannot hold the whole rig, wait before the tracks. A truck stopped on the tracks with a train coming has no good option. The rule exists to keep trucks out of that position.
Traffic signals past a crossing are the classic trap. A green light past the tracks can turn red while the truck is still crossing. The queue ahead can stop short of the far side. Wait for a gap that fits the whole vehicle plus a margin. A driver behind you may honk. Let the driver honk.
A conviction for entering without space to clear is a Table 3 railroad crossing offense. It carries the same disqualification as a missed stop: no less than 60 days for a first conviction, 120 days for a second within 3 years and 1 year for a third.
What happens if you do not stop?
A missed stop can cost a CDL. Table 3 to section 383.51 lists six railroad-highway grade crossing offenses. Each one carries a disqualification of no less than 60 days for a first conviction, no less than 120 days for a second conviction in a separate incident within 3 years and no less than 1 year for a third or subsequent conviction within 3 years.
| Offense under Table 3 to section 383.51 | First conviction | Second within 3 years | Third within 3 years |
|---|---|---|---|
| Not required to always stop, but fails to slow down and check that tracks are clear | No less than 60 days | No less than 120 days | No less than 1 year |
| Not required to always stop, but fails to stop before reaching the crossing, if the tracks are not clear | No less than 60 days | No less than 120 days | No less than 1 year |
| Always required to stop, but fails to stop before driving onto the crossing | No less than 60 days | No less than 120 days | No less than 1 year |
| Fails to have sufficient space to drive completely through the crossing without stopping | No less than 60 days | No less than 120 days | No less than 1 year |
| Fails to obey a traffic control device or the directions of an enforcement official at the crossing | No less than 60 days | No less than 120 days | No less than 1 year |
| Fails to negotiate a crossing because of insufficient undercarriage clearance | No less than 60 days | No less than 120 days | No less than 1 year |
The six offenses cover the full crossing rule. Two cover drivers who are not required to always stop. One is failing to slow down and check. The other is failing to stop before the crossing when the tracks are not clear. One covers a driver who is always required to stop but fails to stop. The rest cover entering without space to clear, disobeying a traffic control device or an enforcement official and failing to negotiate a crossing for lack of undercarriage clearance.
The disqualification sits on top of any fine. A railroad crossing violation also adds CSA points: failure to stop at a railroad crossing under section 392.10(a)(3) carries a severity weight of 5 in the Unsafe Driving BASIC. The CSA Violation Points Checker shows the weight, the BASIC and the day the points fall off the 24-month window.
The CDL Disqualification Checker works out the disqualification period and earliest reinstatement date for railroad offenses and the other Table 3 offenses. The FMCSA Fine Calculator shows the maximum civil penalty for the violation category. A carrier that knowingly allows a disqualified driver to drive faces its own penalties under section 383.51(a)(2).
How do you use the Railroad Crossing Stop Checker?
- Pick your vehicle type: bus with passengers, empty bus, cargo tank, other commercial motor vehicle or not a commercial motor vehicle.
- Pick the placard the load requires, or no placard. Pick Division 2.3 chlorine for any quantity of chlorine.
- If the vehicle is a cargo tank, say whether it is used for hazmat, carries a commodity above its flashpoint at loading or runs under a Part 107 exemption.
- Pick the crossing type. Pick the inactive warning device option to see why the proposed exception does not excuse the stop yet.
- Say whether you have space to drive completely through the crossing without stopping.
- Read the verdict, the check table, the stop procedure and the notes. Copy the summary for the trip file, or reset the checker to start over.
Frequently asked questions
Which trucks must stop at railroad crossings?
Buses transporting passengers, trucks hauling any quantity of Division 2.3 chlorine, trucks placarded for one of the 18 listed hazard classes and cargo tank motor vehicles that meet the hazmat, flashpoint or exemption rules must stop at every railroad grade crossing under 49 CFR 392.10. The stop is 15 to 50 feet from the nearest rail, followed by a look and listen in each direction and a crossing in one gear with no shift.
Do empty cargo tanks have to stop at railroad crossings?
Yes, when the tank is used for hazmat. Section 392.10(a)(4) covers every cargo tank motor vehicle, whether loaded or empty, used for the transportation of any hazardous material. A tank that runs under a Part 107 exemption must also stop loaded or empty. A food-grade or water tank that meets none of the three cargo tank rules does not stop on the cargo tank paragraphs.
Do buses have to stop at every railroad crossing?
A bus transporting passengers must stop at every grade crossing under section 392.10(a)(1). An empty bus with no passengers aboard does not owe the stop under that paragraph, but it must still slow under section 392.11. Many states add their own school bus stop rules, so check state law on your route.
How far from the tracks must a truck stop?
Between 15 and 50 feet from the nearest rail. Closer than 15 feet is too close and farther than 50 feet is not the stop the regulation describes. After stopping, the driver looks and listens in each direction, ascertains that no train is approaching and crosses in a gear that completes the crossing without a gear change.
Can a truck cross without stopping when the gates are up and the lights are off?
No, not yet. FMCSA proposed an exception for a crossing with an active warning device not in an activated state in 2025, with a data notice in 2026. No final rule exists, so the exception is not law. A listed vehicle must still stop at a crossing with an inactive warning device.
What happens if a truck driver does not stop at a railroad crossing?
A first conviction under Table 3 to section 383.51 means a CDL disqualification of no less than 60 days. A second conviction in a separate incident within 3 years means no less than 120 days. A third or subsequent conviction within 3 years means no less than 1 year. The violation also carries a severity weight of 5 in the Unsafe Driving BASIC.
Related tools
- Hazmat Placard Checker: work out which placard a load requires from the hazard class and quantity.
- Pre-Trip Inspection Checklist: run the brake, light and horn checks that matter most at a crossing before the trip.
- Emergency Equipment Checker: check what section 393.95 requires on the truck, including the fire extinguisher.
- CDL Disqualification Checker: check your CDL disqualification period and earliest reinstatement date for major, serious, railroad and out-of-service offenses.
- FMCSA Fine Calculator: check the maximum FMCSA fine for any violation under 49 CFR Part 386, with the exact citation and next steps.
- CSA Violation Points Checker: pick a violation and its date to see the severity weight, the BASIC, the time weight and the day it falls off the 24-month SMS window.
- Trucking Tools: browse every free calculator on Trucking Mind.
Sources
- 49 CFR 392.10, Railroad grade crossings; stopping required. ecfr.gov/current/title-49/section-392.10 Accessed November 19, 2026.
- 49 CFR 392.11, Railroad grade crossings; slowing down required. ecfr.gov/current/title-49/section-392.11 Accessed November 19, 2026.
- 49 CFR 392.12, Highway-rail crossings; safe clearance. ecfr.gov/current/title-49/section-392.12 Accessed November 19, 2026.
- 49 CFR 383.51, Disqualification of drivers, Table 3. ecfr.gov/current/title-49/section-383.51 Accessed November 19, 2026.
- 49 CFR 390.5, Definitions: business district. ecfr.gov/current/title-49/section-390.5 Accessed November 19, 2026.
- FMCSA, Railroad Grade Crossings; Stopping Required: Exception for Railroad Grade Crossing Equipped With Active Warning Device Not in Activated State, notice of proposed rulemaking, 90 FR 22914, May 30, 2025; notification of data availability, 91 FR 14803, Mar 27, 2026. federalregister.gov/documents/2026/03/27/2026-06013 Accessed November 19, 2026.