Not legal advice. This checker runs your answers against the federal placarding rule. Check the shipping papers and the current rule before you move a load.
Enter each material on the load. Every answer updates as you change each field. Add up to six materials.
Material 1
Placard required: FLAMMABLE
Display FLAMMABLE on each side and each end of the vehicle.
Material by material
| Material | Result | Why |
|---|---|---|
| Material 1: Class 3 flammable liquid, 1,500 lb, non-bulk 172.504 Table 2 | Placard required | The FLAMMABLE placard is required. The counted Table 2 aggregate is 1,500 lb, at or above the 1,001 lb line. |
| Table 2 aggregate gross weight 172.504(c) | Threshold met | The counted Table 2 aggregate is 1,500 lb, at or above the 1,001 lb line. Bulk weight, Class 9 weight, Division 6.2 weight and section 172.505 material weight are not counted. |
What to know
- You need a CDL with an H endorsement to haul a placarded load. (383.93)
- Placards go on each side and each end of the vehicle. (172.504(a))
- This checker covers domestic highway transportation only. Class 9 placards and other rules differ for international shipments.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not professional advice โ verify placard requirements against the current federal rule and your shipping papers before you move a load.
Quick answer: Some hazmat loads need a placard at any quantity, while Table 2 loads need one only at 1,001 lb aggregate gross weight or more. The DANGEROUS placard can replace two or more Table 2 placards in non-bulk packages. Enter each material on the load to see the placards it requires, the exceptions that apply and the DANGEROUS option.
At the defaults
One material sits on the load at the defaults: a Class 3 flammable liquid, 1,500 lb aggregate gross weight, in non-bulk packages, loaded at one facility.
The checker shows a FLAMMABLE placard. The counted Table 2 aggregate is 1,500 lb, at or above the 1,001 lb line, so the placard is required.
When do you need a placard?
A placard is a diamond-shaped sign on the outside of the vehicle. It tells first responders and inspectors what hazard the load carries.
Federal law sorts hazardous materials into two tables in 49 CFR 172.504. Table 1 materials need a placard at any quantity, while Table 2 materials need one only when the aggregate gross weight reaches 1,001 lb.
The driver needs the placard before the vehicle moves. A missing or wrong placard can stop the load at a roadside inspection.
| Table 1 hazard class or division | Placard | When |
|---|---|---|
| Division 1.1, 1.2, 1.3 explosives | EXPLOSIVES 1.1, 1.2, 1.3 | Any quantity |
| Division 2.3 poison gas | POISON GAS | Any quantity |
| Division 4.3 dangerous when wet | DANGEROUS WHEN WET | Any quantity |
| Division 5.2 Type B, temperature controlled | ORGANIC PEROXIDE | Any quantity |
| Division 6.1 poison inhalation hazard | POISON INHALATION HAZARD | Any quantity |
| Class 7 radioactive, Yellow III label | RADIOACTIVE | Any quantity |
Table 1 has no weight threshold. Ten pounds of a Division 2.3 poison gas needs a POISON GAS placard, just as 10,000 lb does.
| Table 2 hazard class or division | Placard | When |
|---|---|---|
| Division 1.4, 1.5, 1.6 explosives | EXPLOSIVES 1.4, 1.5, 1.6 | 1,001 lb or more |
| Division 2.1 flammable gas | FLAMMABLE GAS | 1,001 lb or more |
| Division 2.2 non-flammable gas | NON-FLAMMABLE GAS | 1,001 lb or more |
| Class 3 flammable liquid | FLAMMABLE | 1,001 lb or more |
| Combustible liquid | COMBUSTIBLE | 1,001 lb or more, bulk only |
| Division 4.1 flammable solid | FLAMMABLE SOLID | 1,001 lb or more |
| Division 4.2 spontaneously combustible | SPONTANEOUSLY COMBUSTIBLE | 1,001 lb or more |
| Division 5.1 oxidizer | OXIDIZER | 1,001 lb or more |
| Division 5.2 other organic peroxide | ORGANIC PEROXIDE | 1,001 lb or more |
| Division 6.1 poison, other than PIH | POISON | 1,001 lb or more |
| Division 6.2 infectious substance | NONE | Never placarded |
| Class 8 corrosive | CORROSIVE | 1,001 lb or more |
| Class 9 miscellaneous | CLASS 9 | Not required, domestic |
Table 2 turns on the aggregate, not on one material alone. Two Table 2 materials at 600 lb each add up to 1,200 lb, so both placards are required.
Division 6.2 is the odd entry. Table 2 shows NONE for infectious substances, so the load never carries a placard for them.
What is the 1,001-lb rule?
Section 172.504(c) sets the line at 454 kg (1,001 lb). A vehicle with less than 1,001 lb aggregate gross weight of Table 2 material in non-bulk packages needs no placard for that material.
Aggregate gross weight means the weight of the material plus its packaging. The count includes the drums, boxes and pallets the material travels in.
The line sits at 1,001 lb, not 1,000 lb. A load at exactly 1,000 lb needs no placard, while a load at 1,001 lb does.
Not every pound counts toward the aggregate. PHMSA letters of interpretation leave six kinds of weight out of the count.
| Weight | Counted? | Why |
|---|---|---|
| Table 2 material in bulk packaging | No | Bulk packagings need a placard at any quantity, so their weight stays out of the count |
| Class 9 material | No | PHMSA letter 09-007: only material that requires placarding counts |
| Division 6.2 material | No | PHMSA letter 22-0050: Division 6.2 is outside the subpart |
| Combustible liquid in non-bulk packages | No | PHMSA letter 97-0099: non-bulk combustible liquid is not subject to placarding |
| Section 172.505 material | No | PHMSA letter 05-0168 Scenario 3: its weight is not counted |
| Residue in empty non-bulk packages | No | 172.504(d)(1): residue in empty non-bulk packages is not counted |
The exclusions change real answers. A load with 500 lb of Class 3 material and 600 lb of Class 9 material counts only 500 lb, so no placard is required.
Bulk packaging skips the 1,001 lb line entirely. A bulk tank with 500 lb of Class 3 material needs a FLAMMABLE placard at any quantity.
Limited quantity shipments sit outside the placarding subpart. Section 172.500(b)(2) removes them, so they need no placard at any weight.
When can you use a DANGEROUS placard?
The DANGEROUS placard is one placard that stands in for several. Section 172.504(b) allows it when two or more Table 2 categories in non-bulk packages need different placards.
Two categories at 800 lb each make a 1,600 lb aggregate, so both placards are required. One DANGEROUS placard can replace both of them.
The 2,205 lb rule limits the shortcut. When 1,000 kg (2,205 lb) or more of one category is loaded at one facility, that category keeps its own placard.
A load with 2,500 lb of Class 3 material from one facility and 800 lb of Class 8 material can use DANGEROUS for the corrosive placard only. The FLAMMABLE placard stays on the vehicle.
Bulk packagings never join the DANGEROUS placard. A category with any bulk material keeps its own placard, while the non-bulk categories may still share one DANGEROUS placard.
You may also display a DANGEROUS placard when no placard is required. Two or more Table 2 categories in non-bulk packages allow a voluntary DANGEROUS placard, even below 1,001 lb.
Which exceptions remove a placard?
Section 172.504(f) lists the exceptions that remove a placard after the tables require one. The checker applies each exception in the order the rule lists them.
| Exception | What it does |
|---|---|
| (f)(1) | Only the lowest Class 1 division number is displayed |
| (f)(2) | FLAMMABLE may replace COMBUSTIBLE on a cargo tank or portable tank |
| (f)(3) | NON-FLAMMABLE GAS is not required when FLAMMABLE GAS is placarded |
| (f)(4) | OXIDIZER is not required with EXPLOSIVES 1.1 or 1.2 placards |
| (f)(5) | OXIDIZER is not required with EXPLOSIVES 1.5 placards on a highway vehicle |
| (f)(6) | EXPLOSIVES 1.4 is not required for Division 1.4S material not required to be labeled 1.4S |
| (f)(7) | OXYGEN may replace NON-FLAMMABLE GAS for domestic oxygen |
| (f)(8) | POISON INHALATION HAZARD is not required when POISON GAS is displayed, domestic |
| (f)(10) | A POISON placard for Division 6.1 Packing Group III may show PG III |
| (f)(11) | POISON is not required when POISON INHALATION HAZARD or POISON GAS is displayed, domestic |
The Class 1 rule surprises many drivers. A load with Division 1.1 and Division 1.4 explosives shows only the EXPLOSIVES 1.1 placard.
The gas rules work the same way. A load with flammable gas and non-flammable gas shows only the FLAMMABLE GAS placard.
The oxygen rule is a choice, not a requirement. Domestic oxygen may show an OXYGEN placard instead of NON-FLAMMABLE GAS, while NON-FLAMMABLE GAS stays acceptable.
One exception has its own rule for bulk packagings. Class 9 needs no placard for domestic transportation, while a bulk Class 9 packaging must still show the ID number.
Does combustible liquid need a placard?
It depends on the packaging. A combustible liquid in non-bulk packages never needs a placard, while the same liquid in a bulk packaging does.
Section 172.500(b)(5) takes non-bulk combustible liquid out of the placarding subpart entirely. The weight does not count toward the 1,001 lb aggregate either.
A bulk packaging changes the answer. A combustible liquid in a bulk tank needs a COMBUSTIBLE placard at any quantity, because the 1,001 lb exception does not apply to bulk packagings.
A FLAMMABLE placard may replace the COMBUSTIBLE placard on a cargo tank or portable tank. A load with both flammable and combustible liquid in bulk shows only the FLAMMABLE placard.
What about subsidiary hazards?
A material can carry a subsidiary hazard beside its main class. Section 172.505 adds a placard for the subsidiary hazard on top of the placard for the main class.
A subsidiary poison inhalation hazard needs a POISON INHALATION HAZARD placard in addition to any other required placard. The 1,001 lb exception does not apply to a 172.505 material, so its own placard applies at any quantity.
A load with 500 lb of Class 3 material with a subsidiary poison inhalation hazard needs two placards. The FLAMMABLE placard and the POISON INHALATION HAZARD placard both go on the vehicle.
A subsidiary dangerous when wet hazard works the same way. It adds a DANGEROUS WHEN WET placard while its own placard applies at any quantity.
Uranium hexafluoride has its own rule. At 1,001 lb or more it adds CORROSIVE and POISON placards beside the RADIOACTIVE placard.
The weight of a 172.505 material stays out of the aggregate. PHMSA letter 05-0168 Scenario 3 confirms that only the weight of Table 2 material that requires placarding counts.
Do empty packages need placards?
Empty non-bulk packages with residue only need no placard. Section 172.504(d)(1) leaves their residue out of the aggregate and out of the placard count.
The exception has one limit. Residue of a 172.505 material still counts. Its placards are still required.
Empty intermediate bulk containers follow 49 CFR 173.29(d). An empty IBC that meets the listed conditions is not subject to placarding at all.
The conditions cover the container and the residue. The IBC holds no more than 2,100 liters with only residue inside. The material falls in Packing Group II or III.
The checker asks the residue question for non-bulk packages only. A bulk packaging with residue follows the bulk rules, not the empty-package exception.
Do placards mean you need an H endorsement?
Yes. A placarded load needs a driver with a hazmat (H) endorsement on the CDL, under 49 CFR 383.93(b)(4).
The rule turns on the placard, not on the material alone. A load below the 1,001 lb line needs no endorsement for that load, while a placarded load always does.
The H endorsement needs a TSA security threat assessment and a knowledge test. The Hazmat Practice Test covers the knowledge test side.
A carrier moving poison inhalation hazard Zone A or Zone B material may need a hazardous materials safety permit. Section 385.403 sets the permit rule for carriers, separate from the driver endorsement.
Worked examples
Ten runs through the checker show how the tables, the aggregate and the exceptions work together. Each one starts from a simple load and changes one answer.
| Situation | Result | Decides it |
|---|---|---|
| Division 2.3 poison gas, 10 lb | POISON GAS | 172.504 Table 1 |
| Class 3, 500 lb, non-bulk | No placard | 172.504(c) |
| Class 3, 1,001 lb, non-bulk | FLAMMABLE | 172.504 Table 2 |
| Class 3, 500 lb, bulk | FLAMMABLE | 172.504 Table 2 |
| Class 3 800 lb with Class 8 800 lb | FLAMMABLE and CORROSIVE, or DANGEROUS | 172.504(b) |
| Class 3 2,500 lb one facility with Class 8 800 lb | FLAMMABLE plus DANGEROUS for CORROSIVE | 172.504(b) |
| Class 9, 5,000 lb, domestic | No placard | 172.504(f)(9) |
| Division 6.2, 2,400 lb | No placard | 172.500(b)(1) |
| Division 1.1 with Division 1.4 | EXPLOSIVES 1.1 only | 172.504(f)(1) |
| Class 3 500 lb with Class 9 600 lb | No placard | PHMSA 09-007 |
The last row catches many drivers. Class 9 weight never counts toward the aggregate, so 1,100 lb on the vehicle counts as 500 lb.
How to use the Hazmat Placard Checker
- Choose the hazard class or division for the first material on the load.
- Enter the aggregate gross weight in pounds, including the packaging.
- Answer the packaging, facility, residue and limited quantity questions.
- Add more materials with the Add another material button, up to six in total.
- Answer the extra questions when they appear: hazard zone, packing group, subsidiary hazards.
- Read the required placards, the DANGEROUS option and the rule-by-rule breakdown.
Frequently asked questions
When do you need a placard on a hazmat load?
A Table 1 material needs a placard at any quantity. A Table 2 material needs one at 1,001 lb aggregate gross weight or more, or at any quantity in a bulk packaging.
What is the 1,001-lb rule for hazmat placards?
Section 172.504(c) says a vehicle with less than 1,001 lb aggregate gross weight of Table 2 material in non-bulk packages needs no placard. Bulk weight, Class 9 weight, Division 6.2 weight and section 172.505 material weight are not counted.
Can I use a DANGEROUS placard instead of separate placards?
Yes, when two or more Table 2 categories in non-bulk packages need different placards. A category with 2,205 lb or more loaded at one facility keeps its own placard.
Does Class 9 need a placard?
No, not for domestic transportation under 172.504(f)(9). A bulk Class 9 packaging must still show the ID number on a CLASS 9 placard, an orange panel or a white square-on-point display.
Do I need an H endorsement if my load has placards?
Yes. A placarded load needs a driver with a hazmat (H) endorsement on the CDL, under 49 CFR 383.93(b)(4).
Does a combustible liquid need a placard?
Not in non-bulk packages: section 172.500(b)(5) takes it out of the placarding subpart. In a bulk packaging it needs a COMBUSTIBLE placard at any quantity.
Related tools
- Hazmat Practice Test: practice for the hazmat endorsement knowledge test.
- CDL Class Checker: find which CDL class a vehicle needs, from GCWR, GVWR, passengers and hazmat.
- CDL Disqualification Checker: check the disqualification period for a conviction under 49 CFR 383.51.
- CDL Practice Test: practice for the knowledge test before you sit the real exam.
- DOT Physical Readiness Checker: check readiness for the DOT medical exam.
- Trucking Tools: browse every free calculator on Trucking Mind.
Sources
- 49 CFR 172.504, General placarding requirements. law.cornell.edu/cfr/text/49/172.504 Accessed November 18, 2026.
- 49 CFR 172.505, Placarding for subsidiary hazards. law.cornell.edu/cfr/text/49/172.505 Accessed November 18, 2026.
- 49 CFR 172.500, Applicability of placarding requirements. law.cornell.edu/cfr/text/49/172.500 Accessed November 18, 2026.
- 49 CFR 172.101, Purpose and use of hazardous materials table. law.cornell.edu/cfr/text/49/172.101 Accessed November 18, 2026.
- 49 CFR 173.29, Empty packagings. law.cornell.edu/cfr/text/49/173.29 Accessed November 18, 2026.
- 49 CFR 383.93, Endorsements. law.cornell.edu/cfr/text/49/383.93 Accessed November 18, 2026.
- 49 CFR 383.5, Definitions. law.cornell.edu/cfr/text/49/383.5 Accessed November 18, 2026.
- PHMSA letter of interpretation 05-0168, DANGEROUS placard and subsidiary hazards. phmsa.dot.gov/regulations/title49/interp/05-0168 Accessed November 18, 2026.
- PHMSA letter of interpretation 22-0050, placarding and the DANGEROUS placard. phmsa.dot.gov/regulations/title49/interp/22-0050 Accessed November 18, 2026.
- PHMSA letter of interpretation 00-0195, aggregate gross weight and bulk packagings. phmsa.dot.gov/regulations/title49/interp/00-0195 Accessed November 18, 2026.
- PHMSA letter of interpretation 02-0043, aggregate gross weight and bulk packagings. phmsa.dot.gov/regulations/title49/interp/02-0043 Accessed November 18, 2026.