Skip to main content

Trucking Mind

One paper at a time. This checker tests one shipping paper against 49 CFR 172.201 to 172.205, 172.602, 172.604 and 177.817. A result that fails means the paper must be fixed before the load is accepted.

Enter the fields from the paper, answer the questions, then check the result. Every answer updates as you change each field.

Who you are

The basic description

Shipper and certification

Emergency response information

Additional entries

In the cab

Complete: ready to accept

Hazardous material shipment: full shipping paper

Every required element is present and in the form Part 172 requires.

The basic description

  1. UN1993, Flammable liquids, n.o.s., 3, PG II
  2. Total quantity: 200 kg
  3. Packages: 12 drums
  4. Technical name in parentheses for the generic description (172.203(k)).
CheckResultDetail
Identification numberPassUN1993 in the form the rule requires (172.202(a)(1)).
Proper shipping namePassShown on the paper (172.202(a)(2)).
Hazard class or divisionPassClass or division 3 shown (172.202(a)(3)). Subsidiary hazards go in parentheses right after the primary class.
Packing groupPassPG II in Roman numerals (172.202(a)(4)).
Total quantityPass200 kg with a unit of measurement (172.202(a)(5)).
Number and type of packagesPass12 drums shown (172.202(a)(7)).
Basic description orderPassIdentification number, proper shipping name, hazard class, packing group, in sequence with nothing interspersed (172.202(b)).
HM entries distinguishedPassHM entries are set apart as the rule requires (172.201(a)(1)).
Shipper name and addressPassShown on the paper. The shipper is also identified through the certification signature (172.204(d)).
Shipper certificationPassCertification printed on the paper (172.204(a)).
Certification signaturePassSigned by a principal, officer, partner or employee of the shipper or an agent (172.204(d)).
Emergency response informationPassOn the shipping paper (172.602(b)(3)(i)).
Emergency response telephone numberPassShown on the shipping paper, immediately after the hazardous material description or once in a prominent place (172.604(a)(3)).
Phone monitored at all timesPassMonitored at all times the material is in transportation, including storage incidental to transportation, by a person knowledgeable of the material or with immediate access to one (172.604(a)(1), (a)(2)).
ERI provider identifiedInfoThe shipper answers the emergency number itself, so no provider contract number applies (172.604(b)(1)).
Technical namePassTechnical name shown in parentheses with the basic description (172.203(k)).
Hazardous substance RQInfoThis material is not a hazardous substance, so no RQ entry is required (172.203(c)).
Poison inhalation hazardInfoThis material is not poisonous by inhalation, so no zone entry is required (172.203(m)).
Hazardous waste manifestInfoThis is not a hazardous waste shipment, so no manifest is required (172.205).
Cab placementPassTabbed or first, within immediate reach while the driver is belted at the controls and visible or in the driver-side door holder (177.817(e)).
Retention clockInfoKeep a copy until Nov 19, 2027: 1 year after acceptance by the initial carrier (177.817(f)).

The figures

FigureValueNote
You are theCarrierThe person receiving the shipping paper (177.817(f)).
Retention period1 yearFrom the date of acceptance by the initial carrier (177.817(f)).
Keep a copy untilNov 19, 2027The retained copy must include the date of acceptance by the initial carrier.
Checks passed16 of 210 items missing or wrong, 0 warnings.
Shipment typeHazardous materialFull shipping paper rules apply (172.200(a)).

What to do

  • Keep a copy of this paper until Nov 19, 2027. The copy must include the date of acceptance by the initial carrier.

Notes

  • The retention clock is different for the two sides of the load. The person who provides the shipping paper keeps it 2 years under 172.201(e). A carrier receiving the paper keeps it 1 year under 177.817(f). Hazardous waste is 3 years for both sides.
  • Since Sep 3, 2026, emergency response information may be kept in hard copy printed on paper or in electronic format (172.602(b)(1), PHMSA HM-268D, 91 FR 49325). The shipping paper itself is still a paper document for highway transport; only the emergency response information may be electronic.
  • A callback number never satisfies the emergency phone rule. An answering service, answering machine or beeper does not meet the requirement (172.604(a)(2)).
  • This checker covers the shipping paper rules in 49 CFR 172.201 to 172.205, 172.602, 172.604 and 177.817. It does not check placards, labels, markings or packaging.

This checker applies 49 CFR 172.201 to 172.205, 172.602, 172.604 and 177.817 to your answers. Confirm the paper against the current regulation and your company policy before you rely on a result.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice — check the current regulation and your company policy before you rely on a result.

Quick answer: A hazmat shipping paper must describe each hazardous material in a fixed sequence: identification number, proper shipping name, hazard class or division, packing group in Roman numerals, then total quantity with its unit plus the number and type of packages. It must also carry the shipper certification plus emergency response information with a monitored emergency phone number, along with any additional entries the material needs, such as a technical name for a generic description or an RQ entry for a hazardous substance. The shipper keeps a copy for 2 years. A carrier keeps a copy for 1 year. Hazardous waste is 3 years for both. This checker tests a paper field by field against 49 CFR 172.201 to 172.205, 172.602, 172.604 and 177.817. It lists every missing item with its citation. It gives the retention expiry date.

Last reviewed: · Focus keyword: hazmat shipping paper requirements

What is a hazmat shipping paper?

A hazmat shipping paper is the document that describes a hazardous material shipment for everyone who handles it: the shipper who offers it, the driver who hauls it, the inspector who stops it, plus the emergency responder who arrives if something goes wrong. Section 172.200(a) requires each person who offers a hazardous material for transportation to describe the material on the shipping paper in the manner the rules require. In practice the paper is usually a bill of lading, a waybill or a manifest. The form does not matter. The contents do.

The paper has two jobs. The first is identification: it tells the driver and any responder exactly what is on the truck, how much of it there is, plus what hazard it presents. The second is accountability: the shipper certification on the paper states that the material is properly classified, described, packaged, marked and labeled, plus in proper condition for transportation. A carrier may not accept a hazardous material for transportation without a shipping paper prepared as Part 172 requires. Section 177.817(a) states that rule plainly. Section 177.817(b) adds that an initial carrier may not accept the load without the shipper certification.

A few shipments need no shipping paper at all. Section 172.200(b) excepts limited quantity packages on the highway, materials identified by the letter A in column 1 of the 172.101 table when they are not moving by air, plus materials identified by the letter W when they are not moving by water. The exceptions never cover a hazardous substance, a hazardous waste or a marine pollutant. If a paper is used for an excepted shipment anyway, it must still describe the material correctly.

The shipping paper is only one part of hazmat communication. The same description drives the placards on the trailer, the labels on the packages, plus the markings on the outside of the load. The Hazmat Placard Checker covers the placard side. The Hazmat Label and Marking Checker covers labels and markings. Get the description right on the paper first, because every other communication copies from it.

What must the basic description include, in what order?

Section 172.202(a) sets out the basic description: the identification number from column 4 of the 172.101 table, the proper shipping name from column 2, the hazard class or division number from column 3, plus the packing group in Roman numerals from column 5. Those four elements must appear in that sequence, with no additional information interspersed. Section 172.202(b) gives the example: UN2744, Cyclobutyl chloroformate, 6.1, (8, 3), PG II. Note the subsidiary hazards in parentheses right after the primary class. That placement is required by section 172.202(a)(3), except for combustible liquids.

The packing group has exceptions worth knowing. Section 172.202(a)(4) excepts Class 1 explosives, self-reactive substances, Division 5.2 organic peroxides, plus entries that are not assigned a packing group, such as Class 7 radioactive materials. For those entries the description simply has no packing group. A checker must not flag its absence. The packing group may be preceded by the letters PG, as in PG II. The words Class or Division may be included before the hazard class or division numbers. For domestic shipments, the hazard class or division names may follow the numbers or the basic description.

Two more elements ride with the basic description. Section 172.202(a)(5) requires the total quantity of hazardous material covered by the description, by mass or volume, with the unit of measurement shown, for example 200 kg or 50 L. For Class 1 materials the quantity must be the net explosive mass. Bulk packages, cylinders and packages containing only residue are excepted from the strict quantity rule, provided some indication of the total quantity is shown, for example 1 cargo tank or 10 cylinders. Section 172.202(a)(7) requires the number and type of packages, for example 12 drums. The packaging specification number may be included. Common abbreviations for packaging types are allowed.

Section 172.202(c) lets the total quantity appear before or after the description, or both, plus it lets the type of packaging and destination marks be entered in any appropriate manner before or after the basic description. Abbreviations may express units of measurement and types of packaging. Technical and chemical group names may go in parentheses between the proper shipping name and the hazard class, or following the basic description, under section 172.202(d). What the rule never allows is extra information wedged between the four basic elements. That is the most common order mistake on real papers.

ElementSourceNotes
Identification number172.202(a)(1)UN or NA number from column 4 of the 172.101 table
Proper shipping name172.202(a)(2)Exact name from column 2 of the 172.101 table
Hazard class or division172.202(a)(3)Subsidiary hazards in parentheses right after the primary class
Packing group172.202(a)(4)Roman numerals I, II or III; excepted for Class 1, self-reactive substances, Division 5.2 and entries with no assigned packing group
Total quantity172.202(a)(5)Mass or volume with the unit shown; net explosive mass for Class 1
Number and type of packages172.202(a)(7)For example 12 drums; specification number may be included

What additional entries does section 172.203 require?

The basic description is the floor, not the ceiling. Section 172.203 adds entries for special cases. Each one applies only when the shipment fits its trigger. A paper can have a perfect basic description and still be incomplete because an additional entry is missing. The checker asks about the three most common ones: the technical name, the RQ entry and the poison inhalation hazard entry. The full list is wider.

The technical name rule catches more papers than any other. Section 172.203(k) requires the technical name of the material in parentheses with the basic description whenever the proper shipping name is one of the generic descriptions identified by the letter G in column 1 of the 172.101 table. That covers the n.o.s. entries drivers see every day, such as Flammable liquids, n.o.s. For a mixture or solution of two or more hazardous materials, the technical names of at least the two components most predominantly contributing to the hazards must be shown. The regulation gives the example UN 2924, Flammable liquid, corrosive, n.o.s., 3 (8), II (contains Methanol, Potassium hydroxide).

Hazardous substances need two things under section 172.203(c): the letters RQ entered before or after the basic description, plus the name of the hazardous substance in parentheses if the proper shipping name does not identify it by name. If the material contains two or more hazardous substances, at least two must be identified, including the two with the lowest reportable quantities. Materials poisonous by inhalation need the words Poison-Inhalation Hazard or Toxic-Inhalation Hazard plus the zone, entered immediately following the shipping description, under section 172.203(m). The zone is A, B, C or D for gases, A or B for liquids.

Other entries cover narrower cases. A shipment under a special permit bears the notation DOT-SP followed by the permit number, clearly associated with the description it applies to. A limited quantity shipment bears the words Limited Quantity or Ltd Qty following the basic description. A marine pollutant bears the words Marine Pollutant plus the name of the component that makes it a marine pollutant. An elevated temperature liquid that does not disclose the fact in its proper shipping name bears the word HOT immediately before the proper shipping name. Non-odorized liquefied petroleum gas bears the word non-odorized or not-odorized. Highway shipments in MC 330 or MC 331 cargo tanks need the water content or noncorrosive notation for anhydrous ammonia and liquefied petroleum gas under section 172.203(h).

TriggerEntry requiredSection
Shipment under a special permitDOT-SP plus the permit number172.203(a)
Limited quantityLimited Quantity or Ltd Qty after the basic description172.203(b)
Hazardous substanceRQ plus the substance name in parentheses172.203(c)
Generic n.o.s. descriptionTechnical name in parentheses172.203(k)
Marine pollutantMarine Pollutant plus the component name172.203(l)
Poisonous by inhalationPoison-Inhalation Hazard or Toxic-Inhalation Hazard plus the zone172.203(m)
Elevated temperature liquidHOT immediately before the proper shipping name172.203(n)
Temperature-controlled peroxide or self-reactiveTEMPERATURE CONTROLLED plus control and emergency temperatures172.203(o)
Non-odorized LPGnon-odorized or not-odorized172.203(p)

Who must certify a shipping paper? Who is excepted?

Every person who offers a hazardous material for transportation must certify it. Section 172.204(a) requires the offeror to print the certification on the shipping paper containing the required shipping description. The certification states that the named materials are properly classified, described, packaged, marked and labeled, plus in proper condition for transportation according to the applicable regulations of the Department of Transportation. The exact wording is in section 172.204(a)(1). An international declaration form in section 172.204(a)(2) may be used instead. The certification must be legibly signed by a principal, officer, partner or employee of the shipper or an agent, manually, by typewriter or by other mechanical means, under section 172.204(d).

The exceptions are narrow. Section 172.204(b)(1) requires no certification for a hazardous material offered for transportation by motor vehicle and transported in a cargo tank supplied by the carrier, or by the shipper as a private carrier, except for a hazardous material that is to be reshipped or transferred from one carrier to another. The exception never covers hazardous waste. Section 172.204(b)(2) also excepts the return of an empty tank car that previously contained a hazardous material and has not been cleaned or purged. Rail shipments may use a verbal certification or an electronic signature under section 172.204(a)(3). Air shipments use the certification in section 172.204(c), in duplicate, plus the added declaration that all of the applicable air transport requirements have been met.

The certification matters most at the dock. An initial carrier may not accept a hazardous material offered for transportation unless the shipping paper includes a certification meeting section 172.204. That is section 177.817(b). It puts the driver in the position of refusing a load whose paper is unsigned. A missing certification is not a paperwork nicety. It is a ground to turn the load down. The checker flags a missing or unsigned certification as a failure. It treats the cargo tank and private carriage exceptions as the only ways around it.

What is a hazardous waste manifest? How is it different?

A hazardous waste shipment travels on a manifest, not just a shipping paper. Section 172.205(a) provides that no person may offer, transport, transfer or deliver a hazardous waste unless an EPA Form 8700-22 manifest, with Form 8700-22A when necessary, is prepared in accordance with 40 CFR 262.20 and is signed, carried and given as the section requires. The generator prepares the manifest under 40 CFR part 262. The original copy must be dated and bear the handwritten signature of the person representing the generator at the time the waste is offered, plus the person representing the initial carrier accepting the waste. Each subsequent carrier and the designated facility sign a copy on acceptance and on receipt.

The manifest doubles as the shipping paper when it contains all of the information the shipping paper rules require. Section 172.205(h) says so directly. The shipping description for a hazardous waste must be modified as section 172.101(c)(9) requires. The waste code may identify the hazardous substance under section 172.203(c)(1). A copy of the manifest bearing all required dates and signatures goes to each carrier accepting the waste. It travels with the shipment in the same manner as a shipping paper. It goes to the designated facility receiving the waste. The generator and each carrier retain a copy for three years from the date the waste was accepted by the initial carrier.

Electronic manifests are the legal equivalent of paper forms. Section 172.205(j) provides that electronic manifests obtained, completed and transmitted in accordance with 40 CFR 262.20(a)(3) and used in accordance with 40 CFR 262.24 satisfy every requirement in the regulations to obtain, complete, sign, provide, use or retain a manifest. Electronic signatures in conformance with 40 CFR 262.25 are acceptable in place of handwritten signatures, provided one printed copy of the electronic manifest bearing the electronic signature is given to the initial transporter. A copy of the electronic manifest satisfies the 3-year retention requirement.

What emergency response information must ride with the load?

Emergency response information is the set of facts a responder needs in the first minutes of an incident. Section 172.602(a) lists seven elements: the basic description and technical name of the material, immediate hazards to health, risks of fire or explosion, immediate precautions to be taken in the event of an accident or incident, immediate methods for handling fires, initial methods for handling spills or leaks in the absence of fire, plus preliminary first aid measures. All seven must be present. A safety data sheet that covers the material usually satisfies the list. The ERG Guide-Number Lookup gives the Emergency Response Guidebook page that responders use first.

Since September 3, 2026, the information may be electronic. Section 172.602(b)(1) now requires the information to be printed legibly in English, either in hard copy printed on paper or in electronic format. The change came from the PHMSA HM-268D final rule, 91 FR 49325, published August 4, 2026, which gives domestic carriers and facility operators the option to maintain electronic copies of emergency response information rather than requiring a hard copy printed on paper. The information must still be available for use away from the package containing the material. It must be presented on the shipping paper, in a document that includes the basic description and technical name, or in a separate document that cross-references the shipping paper description.

The emergency response telephone number is a separate requirement with its own teeth. Section 172.201(d) requires the shipping paper to contain the number. Section 172.604 sets the conditions: the number must be monitored at all times the hazardous material is in transportation, including storage incidental to transportation. It must be the number of a person knowledgeable of the material with comprehensive emergency response and incident mitigation information, or a person with immediate access to one. A telephone number that requires a call back, such as an answering service, answering machine or beeper, does not meet the requirement. The number goes immediately following the description of the hazardous material, or once on the paper in a prominent, readily identifiable and clearly visible manner, marked as the emergency contact. If an emergency response information provider answers the number, the person registered with the provider must be identified by name or contract number next to the number. Limited quantities, excepted quantities and the shipping names listed in section 172.604(d) need no number. If an incident does happen despite all of this, the Hazmat Incident Reporting Checker covers the immediate phone report and the written report that follow.

How long must you keep a shipping paper?

The retention rule depends on which side of the load you sit on. The two sides are different. Section 172.201(e) requires each person who provides a shipping paper to retain a copy, or an electronic image of it, accessible at or through its principal place of business, for two years after the material is accepted by the initial carrier. Section 177.817(f) requires each person receiving a shipping paper to retain a copy for one year after the material is accepted by the carrier. Hazardous waste is three years for both sides: section 172.201(e) for the provider, section 177.817(f) for the carrier, plus section 172.205(e)(5) for the manifest. The retained copy must include the date of acceptance by the initial carrier, except that for rail, vessel or air shipments the date on the waybill, airbill or bill of lading may be used instead.

The split surprises people who learned the rule as two years for everyone. It is not two years for everyone. The shipper keeps the paper two years. The carrier keeps it one year. Both keep a hazardous waste paper three years. The checker asks who you are before it computes the expiry date, because the same paper has a different expiry date in the shipper file and in the carrier file. A carrier who throws a paper away after one year has complied with the carrier rule, while the shipper copy must stay on file another year.

One more provision saves filing cabinets. A motor carrier using a shipping paper without change for multiple shipments of one or more hazardous materials having the same shipping name and identification number may retain a single copy of the shipping paper instead of a copy for each shipment, if the carrier also retains a record of each shipment made, including shipping name, identification number, quantity transported and date of shipment. Both section 172.201(e) and section 177.817(f) carry that provision. The retained copy must be made available on request to an authorized official of a federal, state or local government agency at reasonable times and locations.

Who keeps the paperHow longSection
Shipper (offeror) providing the paper, hazardous material2 years172.201(e)
Carrier receiving the paper, hazardous material1 year177.817(f)
Shipper or carrier, hazardous waste3 years172.201(e), 177.817(f), 172.205(e)(5)

Where must the shipping paper sit in the cab?

Section 177.817(e) answers that question in detail, because the paper is useless if a responder cannot find it in the first minute. The driver and the carrier must ensure the shipping paper is readily available to authorities in the event of accident or inspection. It must also be recognizable by them. If the shipping paper is carried with other shipping papers or other papers of any kind, it must be clearly distinguished by distinctively tabbing it or by having it appear first. A hazmat paper buried in the middle of a stack of delivery receipts fails that test.

When the driver is at the vehicle controls, the paper must be within immediate reach while the driver is restrained by the lap belt. It must also be either readily visible to a person entering the driver compartment or in a holder mounted to the inside of the door on the driver side of the vehicle. Both conditions apply at once: within reach plus visible or in the door holder. When the driver is not at the controls, the paper goes in the holder mounted to the inside of the driver-side door, or on the driver seat. The rule is written for the responder who opens the door of a crashed truck and needs to know what is inside before touching anything.

Emergency response information follows the same placement logic. Section 172.602(c)(1) requires each carrier to maintain the information in the same manner as prescribed for shipping papers, immediately accessible to drivers of motor vehicles for use in the event of incidents involving hazardous materials. Since September 3, 2026, that information may be electronic, but electronic does not mean buried in an app three menus deep. A responder must be able to reach it at once, which is why many carriers still keep a printed copy in the cab even though the rule no longer requires one.

What are the most common shipping paper mistakes?

The wrong order is the most common mistake. It is also the easiest to make. A paper that lists the proper shipping name before the identification number, or slips the quantity between the hazard class and the packing group, violates section 172.202(b). The four basic elements must appear in sequence with no additional information interspersed. Shippers who build papers from a template that puts the product name first get this wrong on every load until someone catches it. The checker tests the order as a separate item because a paper with every element present can still fail on order alone.

The missing packing group runs second. Drivers and shippers skip it for materials that plainly need one, or write it in Arabic numerals instead of Roman numerals. Section 172.202(a)(4) requires Roman numerals. The reverse mistake also happens: a packing group is demanded for a Class 1 explosive, a Division 5.2 organic peroxide or a Class 7 radioactive material, none of which carries one. The checker knows the exceptions and does not flag a missing packing group where the rule does not require one.

The missing technical name is the quiet failure. A generic n.o.s. description without the technical name in parentheses violates section 172.203(k). The paper looks complete at a glance. The same applies to the missing RQ entry for a hazardous substance and the missing zone entry for a material poisonous by inhalation. All three are additional entries under section 172.203. All three are invisible until someone reads the paper against the table entry for the material. The checker asks about each one separately so none of them slips past.

The emergency phone number produces two classic failures. The first is a callback number: an answering service, an answering machine or a beeper, which section 172.604(a)(2) expressly says does not meet the requirement. The second is a provider number with no registered person identified next to it, which violates section 172.604(b)(2) and section 172.201(d). A third failure is newer: treating the September 2026 electronic format change as permission to drop the shipping paper itself. The HM-268D rule covers emergency response information only. The shipping paper is still a paper document for highway transport. The driver still needs it in the cab under section 177.817(e).

The last mistake is on the retention side. Many carriers keep every paper for two years because that is the number they remember, which is safe but wasteful. Worse, some shippers throw papers away after one year because that is the carrier number they heard, which is a violation of section 172.201(e). The split is simple once it is stated: the shipper keeps the paper two years, the carrier keeps it one year, hazardous waste is three years for both. The checker computes the expiry date from the acceptance date so neither side has to remember the split.

How do you use the Hazmat Shipping Paper Checker?

Work through the paper in front of you, field by field. The checker updates with every change, so you can fix a field on the paper and watch the verdict change.

  1. Pick who you are: shipper or carrier. Enter the date the initial carrier accepted the shipment.
  2. Enter the basic description from the paper: identification number, proper shipping name, hazard class, packing group, total quantity and number and type of packages.
  3. Answer the questions on HM entries, the shipper name and address, the certification and its signature.
  4. Answer the emergency response questions: where the information is kept, whether the phone number is present and monitored, plus the provider identification.
  5. Answer the additional entry questions: technical name, RQ entry, poison inhalation hazard entry, hazardous waste manifest and cab placement.
  6. Read the verdict, the missing items and the retention expiry date. Fix every failed check before you accept the load.

Before you roll, run the Hazmat Placard Checker as well. The placard comes from the same description. A paper that is right with a placard that is wrong still gets the load stopped.

Frequently asked questions

What is the correct order of the basic description on a hazmat shipping paper?

The identification number comes first, then the proper shipping name, then the hazard class or division, then the packing group in Roman numerals. Section 172.202(b) requires the four elements in sequence with no additional information interspersed. Total quantity and the number and type of packages come with the description but are not part of the four-element sequence.

How long must you keep a hazmat shipping paper?

The person who provides the shipping paper keeps it 2 years after acceptance by the initial carrier under section 172.201(e). A carrier receiving the paper keeps it 1 year under section 177.817(f). Hazardous waste is 3 years for both sides under section 172.205(e)(5). The retained copy must include the date of acceptance by the initial carrier.

Does a shipping paper need an emergency phone number?

Yes, in most cases. Section 172.201(d) requires a shipping paper to contain an emergency response telephone number. Section 172.604 sets the rules: the number must be monitored at all times the material is in transportation. It must reach a person knowledgeable of the material or someone with immediate access to that person. A callback number such as an answering service, answering machine or beeper does not meet the requirement. Limited quantities and the shipping names listed in section 172.604(d) are excepted.

Can emergency response information be kept electronically?

Yes. Since September 3, 2026, section 172.602(b)(1) allows emergency response information in hard copy printed on paper or in electronic format, under the PHMSA HM-268D final rule, 91 FR 49325. The shipping paper itself is still a paper document for highway transport. Only the emergency response information may be electronic.

When is a shipper certification not required?

Section 172.204(b) excepts a hazardous material offered for transportation by motor vehicle in a cargo tank supplied by the carrier, plus a hazardous material transported by the shipper as a private carrier, except when the material is reshipped or transferred to another carrier. The exception never covers hazardous waste. An initial carrier may not accept a load without the certification when one is required.

Where must the shipping paper be kept in the truck?

Section 177.817(e) requires the paper to be clearly distinguished from other papers by distinct tabbing or by appearing first. When the driver is at the controls, the paper must be within immediate reach while restrained by the lap belt. It must also be either readily visible to a person entering the driver compartment or in a holder mounted inside the driver-side door. When the driver is away, the paper goes in the door holder or on the driver seat.

Related tools

Sources

Follow on WhatsApp Ask by Voice