Skip to main content

Trucking Mind

This tool answers the IRP and IFTA question only. It works out whether this power unit needs apportioned registration under the International Registration Plan, an IFTA fuel tax license under the International Fuel Tax Agreement, both, or neither. It does not answer the DOT number or MC number question, which is a separate check with its own rules.

Answer each question about the power unit. The result updates as you change each field. Only the power unit axles count toward the axle test: trailer axles never do.

What the vehicle is used for

A recreational vehicle means a vehicle used for personal pleasure or personal travel, not in connection with any commercial endeavor. A motor home hired out or used to haul for pay is not a recreational vehicle under either agreement.

Axles and weight

Use the gross vehicle weight or the registered gross vehicle weight of the power unit alone, whichever your state registration shows. Count the power unit axles only: a two-axle pickup pulling a tandem-axle trailer is still a two-axle power unit.

The combination weight is the gross vehicle weight of the power unit plus the trailer it pulls. A light pickup can cross the 26,000 lb line on the combination weight alone, which is the test that catches most hotshot rigs.

Where it runs

Both agreements switch on at two member jurisdictions. The District of Columbia belongs to IRP but not to IFTA, so a run of one state plus DC needs apportioned plates but no IFTA license.

How often it crosses state lines

Frequency decides whether trip permits beat registration. Permits are priced per trip per state, so rare trips may cost less on permits while regular lanes need full registration.

Base of operations

The IRP Plan needs an established place of business in the base jurisdiction, or residence there if no such place exists. A virtual or shared office does not qualify.

IRP: Yes, apportioned registration required. IFTA: Yes, a license is required.

Both apply. the combination test is the one that puts this rig over the line.

This rig meets the combination test, so it is an apportionable vehicle under the IRP Plan plus a qualified motor vehicle under IFTA rule R245. Because it runs in two or more member jurisdictions, it needs apportioned plates plus an IFTA license. With only a few interstate trips a year, price trip permits before you register: the permit route may cost less for rare trips.

The checks

TestResultDetail
Use: commercial or for hireMetProperty for hire. The IRP Plan covers power units used for the transportation of persons for hire or designed, used, or maintained primarily for the transportation of property. IFTA rule R245 covers motor vehicles used, designed, or maintained for transportation of persons or property.
Two-axle weight test: over 26,000 lbNot metTwo axles at 14,000 lb. The test needs a gross vehicle weight or registered gross vehicle weight in excess of 26,000 lb.
Three-axle test: any weightNot metTwo axles on the power unit. The test needs three or more axles on the power unit, regardless of weight. Trailer axles never count.
Combination test: over 26,000 lbMetIn combination at 30,000 lb. The test needs a combination gross vehicle weight in excess of 26,000 lb.
Two-jurisdiction test: IRPMetRuns in two or more of the 59 IRP member jurisdictions: the 48 contiguous states, the District of Columbia, plus the 10 Canadian provinces.
Two-jurisdiction test: IFTAMetRuns in two or more of the 58 IFTA member jurisdictions: the 48 contiguous states plus the 10 Canadian provinces.
Exemptions: RV, restricted plate, governmentNone applyNot a recreational vehicle, not on restricted plates, plus not government owned. No exemption applies.
IRP resultYesApportionable vehicle: commercial use, the combination test met, plus operation in two or more member jurisdictions.
IFTA resultYesQualified motor vehicle under IFTA rule R245: the combination test met, operated in two or more member jurisdictions.

The figures

FigureValueNote
Power unit axles2Only the power unit axles count toward the three-axle test. Trailer axles never count.
Power unit weight14,000 lbGross vehicle weight or registered gross vehicle weight of the power unit alone.
Combination weight30,000 lbGross vehicle weight of the power unit plus the trailer it pulls.
Weight test that appliesthe combination testMeeting any one of the three tests is enough. Both agreements use the same three tests.
IRP jurisdictionsTwo or moreThe IRP Plan has 59 member jurisdictions.
IFTA jurisdictionsTwo or moreIFTA has 58 member jurisdictions. The District of Columbia is not one of them.
Trip frequencyA few times a yearTrip permits are priced per trip per state. Frequency decides whether permits beat registration.
What IRP gives youOne apportioned plate plus a cab cardValid in all 59 member jurisdictions under full reciprocity. The cab card stays in the vehicle.
What IFTA gives youOne license plus two decals per vehicleValid for the calendar year in all 58 member jurisdictions. File one quarterly return with the base jurisdiction.
Records to keepIRP 3 years, IFTA 4 yearsIRP records: three years after the close of the registration year (Plan section 1000). IFTA records: four years from the return due date or filing date, whichever is later.

What to do

  • Apply for apportioned registration in your base jurisdiction. You need one apportioned plate plus a cab card for this power unit.
  • Apply for an IFTA license in your base jurisdiction. You get one license plus two decals for this vehicle, plus you file one quarterly fuel tax return.
  • Price trip permits before you register. With only a few interstate trips a year, a registration trip permit plus a fuel permit per state per trip may cost less than a year of apportioned registration plus quarterly IFTA filings. Check each state cap first: Texas allows no more than five fuel permit entries per calendar year.
  • Base the registration where the fleet runs plus the records live. With no separate office, the Plan lets you use residence: a resident driver license plus two proofs from the section 305(d) list, such as tax returns filed from the address plus utility bills in your name.
  • Price the plate before you apply. The IRP Apportioned Plate Cost Estimator works out the apportioned fee from your mileage split plus declared weight.
  • Work out the fuel tax too. The IFTA Fuel Tax Estimator prices a quarter of fuel tax by state from your miles plus gallons.

Before you run interstate

  • Carry the cab card in the vehicle. A paper original, a legible paper copy, or a legible electronic image all count.
  • Carry a copy of the IFTA license in each qualified vehicle, with one decal on the outside of each side of the cab.
  • File the IFTA quarterly return even with no operations. The return is due the last day of the month after each quarter.
  • Keep distance plus fuel records for every trip: IRP records for three years, IFTA records for four years.

Notes

  • Only the power unit axles count toward the three-axle test. A two-axle pickup pulling a tandem-axle trailer is still a two-axle power unit.
  • Exactly 26,000 lb does not trigger the weight tests. Both agreements say in excess of 26,000 pounds.
  • A new fleet with no prior-year miles is billed on average per-vehicle distance under Plan section 320. The first-year IRP fee is an estimate, not a quote.
  • Temporary evidence of apportioned registration is good for up to 60 days under Plan section 620. An IFTA temporary decal permit runs 30 days under rule R650.
  • Inadequate IRP records draw an assessment of 20 percent of the apportioned fees on the first offense, 50 percent on the second, 100 percent on the third (Plan section 1015). Each member jurisdiction audits an average of 3 percent of the fleets it renews each year (Plan section 1025).
  • A late IFTA return costs 50 dollars or 10 percent of the delinquent tax, whichever is greater (rule R1220). Interest runs at 9 percent a year for 2026, 0.75 percent a month, with a partial month counted as a whole month (rule R1230).
  • The prior year license plus decals may be displayed through January plus February under rule R655. Renew by December 31 to avoid the gap.
  • This tool applies the IRP Plan plus the IFTA Articles of Agreement to your inputs. Confirm the result with your base jurisdiction before acting: base jurisdictions add their own forms, fees, plus renewal conditions.

This tool applies the IRP Plan plus the IFTA Articles of Agreement to your inputs. Confirm the result against the agreement text plus your base jurisdiction before acting. A weight entered wrong gives a wrong verdict, so check the figures on the registration before relying on the result.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool applies the published text of the IRP Plan plus the IFTA Articles of Agreement to your answers, not legal advice — confirm the result with your base jurisdiction before you register, buy permits, or run interstate.

Quick answer: IRP and IFTA are two separate agreements with the same vehicle test. You need IRP apportioned registration plus an IFTA fuel tax license when a power unit used for hire or for property runs in two or more member jurisdictions and meets any one of three tests: two axles plus a weight over 26,000 lb, three or more axles at any weight, or a combination weight over 26,000 lb. Recreational vehicles are exempt from both. Government-owned plus restricted-plate vehicles are exempt from IRP only. A rig under every test may still apportion by choice under IRP. A rig that crosses state lines only a few times a year may run on trip permits instead. This checker runs both verdicts from your answers, then names what to get.

Last reviewed: · Focus keyword: do I need IRP

What is the difference between IRP and IFTA?

IRP is registration. IFTA is fuel tax. The two agreements answer two different questions about the same truck. A carrier can need one without the other. The International Registration Plan lets a carrier register a power unit once, in one base jurisdiction, then run it in every member jurisdiction on a single apportioned plate plus a cab card. The International Fuel Tax Agreement lets a carrier report the fuel tax it owes every member jurisdiction on one quarterly return, filed with one base jurisdiction. One covers the right to run on the road. The other covers the tax on the fuel burned while running.

The agreements share a vehicle test but little else. Both use the same three weight and axle tests to decide which vehicles they cover, which is why the two questions get asked together. Beyond that test they split: IRP has 59 member jurisdictions, IFTA has 58, because the District of Columbia belongs to IRP only. IRP charges a registration fee apportioned by distance. IFTA reconciles fuel tax already paid at the pump against the tax owed in each jurisdiction. IRP credentials last for the registration year set by the base jurisdiction. IFTA credentials run on the calendar year, ending December 31.

PointIRPIFTA
What it coversVehicle registrationMotor fuel use tax
Members59: 48 contiguous states, DC, 10 provinces58: 48 contiguous states, 10 provinces
What you getOne apportioned plate plus a cab cardOne license plus two decals per vehicle
TermRegistration year set by the base jurisdictionCalendar year, ending December 31
FilingAnnual application plus distance reportQuarterly return, even with no operations
Records kept3 years after the registration year closes4 years from the return due date or filing date
Trip alternativeTrip permit under Plan section 525Fuel permit under rule R310

The confusion between them costs carriers money in both directions. A carrier that buys apportioned plates and assumes the fuel tax is handled will run without an IFTA license until a roadside check or a base jurisdiction letter catches it. A carrier that files IFTA returns and assumes the plates are handled will run on a home-state registration in states where it has no registration at all. The two filings are separate applications, separate credentials, plus separate record duties, even when the same base jurisdiction issues both.

One more distinction matters for new carriers. IRP plus IFTA are agreements among jurisdictions, not federal programs. No federal agency issues an apportioned plate or an IFTA license. The base jurisdiction does the issuing. It sets its own forms, fees, plus renewal conditions on top of the agreement rules. The agreement text sets the floor: the vehicle tests, the credential forms, the record periods, plus the audit rules. Everything else is the base jurisdiction. That is why the checker tells you to confirm the result with your base jurisdiction before acting.

Neither agreement covers the operating authority question. A DOT number, an MC number, plus the Unified Carrier Registration are separate filings under federal law. The IRP plate plus the IFTA license do not replace them. The Do I Need a DOT or MC Number? tool answers that question, including the IFTA item it touches among its eight checks. Use it alongside this checker when starting a new carrier, not instead of it.

Do I need IRP?

You need IRP when your power unit is an apportionable vehicle under the International Registration Plan plus it runs in two or more member jurisdictions. The Plan definition has three parts. All three must hold. First, the vehicle must be a power unit used or intended for use in two or more member jurisdictions. Second, it must be used for the transportation of persons for hire, or designed, used, or maintained primarily for the transportation of property. Third, it must meet one of the three weight or axle tests: two axles plus a gross vehicle weight or registered gross vehicle weight in excess of 26,000 lb, three or more axles regardless of weight, or use in combination when the combination gross vehicle weight exceeds 26,000 lb.

The two-jurisdiction part is the one new carriers underestimate. The Plan counts intent, not history: a power unit used or intended for use in two or more member jurisdictions qualifies, even on its first interstate trip. The official commentary adds a presumption the other way: when a vehicle is not used in more than one jurisdiction for the entirety of a registration year plus six additional months, the presumption is that the registrant did not intend multi-jurisdiction use, though other circumstances can overcome it. In practice, a carrier that plans interstate work is an IRP carrier from the first trip, not after a season of running.

The weight part is the one hotshot operators miss. A two-axle pickup at 14,000 lb looks safely under the line until the trailer goes on. The combination test counts the whole combination: the same pickup pulling a loaded gooseneck at 30,000 lb combined is an apportionable vehicle, because the combination gross vehicle weight exceeds 26,000 lb. The test turns on the weight of the combination as run, not on the power unit alone. A pickup that runs empty one week plus heavy the next crosses the line on the heavy week.

The use part is the one that sorts commercial rigs from private ones. A power unit designed, used, or maintained primarily for the transportation of property is covered whether it runs for hire or for a private fleet hauling its own goods. A bus used for the transportation of persons for hire is covered the same way. What falls outside is the vehicle with no commercial purpose at all, which the exemptions section covers below.

If the answer is yes, the next step is the base jurisdiction application, covered in the base jurisdiction section below. If the answer is no because the rig sits under every test, the optional apportionment section below explains the choice to apportion anyway. If the answer is no because the rig runs in one jurisdiction only, the single-state section below explains what changes the day it crosses a border.

Do I need IFTA?

You need an IFTA license when you operate a qualified motor vehicle in two or more member jurisdictions. IFTA rule R305 states the duty in one line: a license is required when a qualified motor vehicle operates in two or more member jurisdictions. The qualified motor vehicle definition in rule R245 is the same three tests as IRP: two axles plus a gross vehicle weight or registered gross vehicle weight exceeding 26,000 lb, three or more axles regardless of weight, or use in combination when the combination weight exceeds 26,000 lb. Recreational vehicles are excluded.

The IFTA question follows the IRP question almost exactly, with two differences that matter. The first is membership: IFTA has 58 members, not 59, because the District of Columbia is not a member. A carrier running one state plus DC needs apportioned plates but no IFTA license, because the run touches only one IFTA jurisdiction. The second is exemptions: IFTA rule R245 excludes recreational vehicles only. A government-owned vehicle or a restricted-plate vehicle that meets the tests is still a qualified motor vehicle for IFTA, even though the IRP Plan excludes both from apportioned registration. The exemptions section below works through that asymmetry.

There is no mileage threshold. One trip into a second member jurisdiction is enough to trigger the license duty, just as one trip is enough for IRP. There is also no grace period for the first trip: the license plus decals must be in place before the qualified vehicle runs in the second jurisdiction, unless the carrier runs that trip on a fuel permit under rule R310 instead. The permit alternative is real, but it is priced per trip per state, plus state caps limit how often it can be used. The trip permit section below sets out the math.

What the license buys is simplicity at filing time. Without it, a carrier owes fuel tax in every state it runs in, under the rules of each state. With it, the carrier files one quarterly return with the base jurisdiction, reporting miles plus gallons by jurisdiction. The base jurisdiction settles the balance: a refund where the carrier overpaid at the pump, a payment where it underpaid. The return is due even with no operations in the quarter, under rule R930. The IFTA Fuel Tax Estimator prices a quarter of fuel tax by state from miles plus gallons, so you can see the return before you file it.

One boundary to keep straight: IFTA covers motor fuel use tax only. It does not cover weight-distance taxes, highway use taxes, or tolls. Kentucky, New Mexico, Oregon, Connecticut, plus New York each run a separate weight-distance or highway use tax on top of IFTA, with their own filings plus decals. The Weight-Distance Tax Checker works out which of those taxes apply to a given run. An IFTA license does not satisfy any of them.

What are the weight and axle tests?

Both agreements use the same three tests. Meeting any one of them is enough. The tests are written in the alternative: a vehicle that meets the first test is covered even if it fails the other two. A vehicle that meets the third test is covered even though the power unit alone is light. The checker runs all three and names each one it meets.

TestWhat it needsTypical vehicle caught by it
Two-axle weight testTwo axles plus a gross vehicle weight or registered gross vehicle weight in excess of 26,000 lbA heavy two-axle straight truck
Three-axle testThree or more axles on the power unit, regardless of weightA standard semi tractor, a three-axle dump truck
Combination testUse in combination, when the combination gross vehicle weight exceeds 26,000 lbA pickup pulling a loaded gooseneck or flatbed

The word in excess of does real work. A power unit at exactly 26,000 lb does not meet the two-axle weight test. A combination at exactly 26,000 lb does not meet the combination test. The line is 26,001 lb and above. That boundary matters for box trucks plus straight trucks plated right at the line: a truck registered at 26,000 lb sits outside both agreements on the weight test, while the same truck registered at 26,001 lb sits inside them. The checker treats exactly 26,000 lb as under the line, which is what both texts say.

The axle count is the power unit axles only. A two-axle pickup pulling a tandem-axle trailer is a two-axle power unit for the three-axle test, because the trailer axles never count. The point is easy to get wrong at a glance: five axles on the ground, two on the power unit. What counts is the power unit. The three-axle test catches the standard semi tractor, which carries a steer axle plus a tandem drive. It catches three-axle straight trucks at any weight, even a light one.

The weight figure is the gross vehicle weight or the registered gross vehicle weight. The two numbers can differ: a truck with a manufacturer gross vehicle weight rating of 33,000 lb might be registered at 26,000 lb in its home state. Both agreements say gross vehicle weight or registered gross vehicle weight, so either figure over the line triggers the test. Check the registration, not just the door sticker, before answering. The checker uses the figure you enter, so enter the higher of the two when they differ.

The combination test is the one that surprises the most owners. It counts the combination as run: the power unit plus the trailer plus the load. A pickup at 14,000 lb pulling an empty flatbed at 8,000 lb is a 22,000 lb combination, under the line. The same pickup pulling the same trailer loaded to 30,000 lb combined is over the line. The test follows the heaviest combination the rig runs, not the lightest. If any regular load puts the combination over 26,000 lb, the rig is covered.

One metric footnote is worth recording. The IRP Plan states the metric equivalent of 26,000 pounds as 11,793.401 kilograms. IFTA rule R245 states 11,797 kilograms. The two figures differ because each agreement rounds its own way. The pound figure governs in both. The checker works in pounds throughout. A Canadian carrier converting from kilograms should use the 26,000 lb line, not either metric rounding.

What vehicles are exempt from IRP and IFTA?

The exemption lists are short. They are not the same for the two agreements. The IRP Plan excludes three kinds of vehicle from the apportionable vehicle definition: a recreational vehicle, a vehicle displaying restricted plates, plus a government-owned vehicle. IFTA rule R245 excludes one kind only: a recreational vehicle. That asymmetry is the single most misunderstood point in this whole subject, so the table below sets it out plainly.

VehicleIRPIFTA
Recreational vehicle, personal pleasureExemptExempt
Government-owned vehicleExemptNot exempt: the tests decide
Vehicle on restricted platesExemptNot exempt: the tests decide
Commercial vehicle under every testNot required, apportion by choiceNot required, no opt-in

A recreational vehicle means a vehicle used for personal pleasure or personal travel, not in connection with any commercial endeavor. The IRP Plan commentary names campers, house trailers, motor homes, plus mobile homes used exclusively for personal pleasure plus travel by an individual plus family. IFTA rule R248 names motor homes, pickup trucks with attached campers, plus buses when used exclusively for personal pleasure by an individual. The test in both is use, not shape: a motor home hired out, or used to haul for pay, is no longer a recreational vehicle under either definition. The exemption ends with the first commercial trip.

A government-owned vehicle is outside the IRP definition in so many words. It needs no apportioned plate, whatever its weight or route. IFTA is different: rule R245 names recreational vehicles only, so a government truck over the tests, running in two or more IFTA jurisdictions, is a qualified motor vehicle that needs an IFTA license. Whether the government fleet owes fuel tax at all is a separate question, answered by state law rather than by the Articles: many states exempt government fuel purchases from motor fuel tax, but the exemption is a state-law matter. The license duty plus the tax duty are not the same question. A government fleet should confirm both with its base jurisdiction.

A vehicle displaying restricted plates is outside the IRP definition the same way. The Plan defines a restricted plate as a plate with a time, geographic area, distance, or commodity restriction, or a mass transit or other special plate issued for a bus leased or owned by a municipal government, a state or provincial transportation authority, or a private party, operated as part of an urban mass transit system. Farm plates, dealer plates, plus other limited plates fall under the definition when they carry such a restriction. As with government vehicles, IFTA rule R245 has no restricted-plate exclusion, so the fuel tax side still turns on the tests. In practice the plate restriction itself often bars the interstate trip: a plate limited to one county cannot lawfully run the interstate lane that would trigger IFTA.

Trailers deserve a line of their own. IRP apportions power units, not trailing equipment. The official commentary to the apportionable vehicle definition states that trailing equipment is registered under the Plan only under an approved exception, unless it is registered under Plan section 910. A trailer carries its own base registration in its home jurisdiction. Reciprocity agreements cover its interstate movement. The checker asks about the power unit only for that reason: the trailer weight enters the picture through the combination test, but the trailer itself takes no apportioned plate.

What if my truck is under 26,000 lb?

A commercial power unit under every test is not an apportionable vehicle. It is not a qualified motor vehicle either. No apportioned plate is required. No IFTA license is required. The rig registers under the home state rules and pays fuel tax at the pump, like any other light vehicle. That is the position for a two-axle box truck at 24,000 lb running solo, a pickup at 14,000 lb pulling a light trailer, plus any commercial vehicle whose combination weight stays at or under 26,000 lb.

IRP offers something IFTA does not: the choice to apportion anyway. The apportionable vehicle definition closes with an express option: a power unit, or the power unit in a combination, having a gross vehicle weight of 26,000 pounds or less nevertheless may be registered under the Plan at the option of the registrant. A carrier under the line can take one apportioned plate plus one cab card for all 59 member jurisdictions, instead of registering separately in each state it runs in or buying a trip permit per trip. Some carriers take the option for the single credential plus the single renewal. Others keep separate state registrations plus buy trip permits for the rare out-of-state run.

The option is worth pricing before taking. Apportioned registration at a light weight still costs the apportioned share of each jurisdiction full annual fee, calculated from the distance split. For a rig that crosses state lines twice a year, two trip permits may cost less than a year of apportioned fees. For a rig that crosses weekly, the apportioned plate wins. The IRP Apportioned Plate Cost Estimator works out the apportioned fee from a mileage split plus declared weight. The Trip Permit Checker prices the permit route state by state. Run both before deciding.

IFTA has no equivalent option. A vehicle under the tests cannot take an IFTA license for that vehicle, because the license attaches to qualified motor vehicles. Fuel tax for a light rig stays a state matter, paid at the pump in each state, with no quarterly return. That is usually the cheaper outcome anyway: the IFTA return exists to reconcile tax across jurisdictions. A light rig pays its tax where it buys its fuel.

The trap for light rigs is the combination test. A pickup that runs solo at 14,000 lb is under the line. The same pickup pulling a loaded trailer at 30,000 lb combined is over it. The change happens the day the heavy load goes on, not at the next renewal. A carrier that buys a heavier trailer, or starts hauling denser freight, should run this check again with the new combination weight. The same applies in reverse: a rig that drops to a lighter trailer may fall back under the line, though the apportioned registration already held runs to its renewal date.

What if I only run in one state?

A rig that never leaves its home state or province needs neither IRP nor IFTA, whatever its weight. Both agreements switch on at two member jurisdictions: the IRP Plan applies to power units used or intended for use in two or more member jurisdictions. IFTA rule R305 requires a license when a qualified motor vehicle operates in two or more member jurisdictions. One jurisdiction is not enough for either. An 80,000 lb combination running intrastate only registers under the home state rules plus pays fuel tax at the pump, with no apportioned plate plus no IFTA return.

That position lasts exactly as long as the single-state operation does. The first trip into a second member jurisdiction triggers both agreements at once, if the rig meets the tests. The trigger is the trip, not a filing date: the credentials should be in place before the truck crosses the border, or the trip should run on permits. A carrier planning its first interstate lane should apply for apportioned registration plus an IFTA license before the first load, not after it. Temporary evidence of apportioned registration, good for up to 60 days under Plan section 620, plus a 30-day IFTA temporary decal permit under rule R650, can cover the gap while the permanent credentials are issued.

Intrastate-only carriers still have federal duties that this checker does not cover. A USDOT number is required for most interstate carriers plus for many intrastate carriers under state rules. The MCS-150 biennial update applies to every carrier holding a USDOT number. The MCS-150 Due-Date Checker works out when the next update falls due. A new carrier should also read the New-Entrant Timeline Tracker, which lays out the first months of a new authority, including the safety audit window. IRP plus IFTA sit alongside those duties, not instead of them.

One more single-state wrinkle is worth naming. Some states require a trip permit for a lighter vehicle that IRP does not cover at all: Nevada plus Idaho both set permit thresholds near 10,000 lb, well under the 26,000 lb IRP line. A light rig running into one of those states on a permit should check the state threshold rather than assuming the IRP line governs. The Trip Permit Checker carries the lighter-vehicle caveat for those states.

What about the District of Columbia, Alaska, Hawaii, or Mexico?

The District of Columbia is the one jurisdiction where IRP plus IFTA part ways. DC is an IRP member, so a run of one state plus DC touches two IRP jurisdictions and needs apportioned plates. DC is not an IFTA member, so the same run touches only one IFTA jurisdiction and needs no IFTA license. The checker has a dedicated option for the one-state-plus-DC run, because it is the only common lane where the two verdicts split. Add a second IFTA state to the lane, such as Maryland plus Virginia. The IFTA license switches on with it.

Alaska plus Hawaii sit outside both agreements. Neither state is an IRP member or an IFTA member. A truck entering Alaska needs Alaska registration. Fuel tax there is a state matter. The same applies to Hawaii, though the practical route is by barge rather than by road. A carrier based in the lower 48 that runs into Alaska needs separate Alaska credentials for the Alaska leg, on top of the apportioned plate plus IFTA license that cover the rest of the run. The checker flags the non-member part whenever it is selected, so the extra filing is not forgotten.

Mexico sits outside both agreements as well. A US-based carrier running into Mexico needs Mexican registration plus fuel arrangements under Mexican rules. A Mexican-based carrier running into the United States needs US credentials. Plan section 310 covers the carrier whose only established place of business is in a non-member jurisdiction: it may declare as its base jurisdiction the member jurisdiction where it expects to operate the greatest distance in the first year of operation. The official commentary adds that a person with an established place of business only in a jurisdiction south of the United States will declare as base jurisdiction one of the four states that border Mexico: Arizona, California, New Mexico, or Texas.

The Canadian territories are outside both agreements too. The 10 provinces are members of both; Yukon, the Northwest Territories, plus Nunavut are members of neither. A run from British Columbia into Yukon needs separate Yukon credentials for the territorial leg. The same applies to any run touching a territory. The checker treats the territories as non-member operations, alongside Alaska, Hawaii, plus Mexico.

Can I use trip permits instead of IRP and IFTA?

Yes, for rare trips. The two agreements each provide for it expressly. IRP Plan section 525 lets a member jurisdiction issue a trip permit for a vehicle or combination of vehicles in lieu of apportioned or full registration, with each jurisdiction deciding the form plus manner of its own permits. IFTA rule R310 lets persons elect to satisfy motor fuel use tax obligations on a trip-by-trip basis instead of holding an IFTA license. The two permits are separate: a registration trip permit covers the registration side, a fuel permit covers the fuel tax side. One does not cover the other. A truck with apportioned plates but no IFTA license needs only the fuel permit for a state. A truck with an IFTA license but no IRP registration needs only the trip permit. A truck with neither needs both.

The permit route is priced per trip per state, which is what decides whether it beats registration. Texas shows the shape of the math. TxDMV sells a 72-hour permit for 25 dollars plus a 144-hour permit for 50 dollars, each plus a 4.75 dollar processing fee. A round trip counts as two trips for the registration permit. The Texas Comptroller sells a fuel trip permit for 50 dollars, good for one entry plus 20 days, with a maximum of five entries per calendar year. A five-day round trip through Texas with no IRP plus no IFTA costs 209.50 dollars in state fees: two 144-hour permits at 54.75 dollars each plus two fuel permits at 50 dollars each. At 12 round trips a year the same lane costs 2,514 dollars. The fuel cap runs out first: 12 round trips need 24 Texas entries against a five-entry cap, so an IFTA license becomes mandatory. The Trip Permit Checker carries the full state-by-state pricing plus the breakeven count where permits stop being cheaper.

Caps are the hidden limit on the permit route. Texas allows no more than five fuel permit entries per calendar year. Idaho allows three per year, Oregon five per year, Washington three per 30 days, Minnesota one per 30 days. A carrier that plans around permits must track the caps per state, because a cap reached mid-season forces a license application at the worst moment. The caps also explain why the permit route suits a rare trip plus fails a regular lane: the math breaks first on the cap, before it breaks on the price.

Two more permit forms cover special cases. Plan section 530 requires each member jurisdiction to provide a means of temporary registration for unladen apportionable vehicles, known as hunter permits, issued for a minimum fee at a registered weight no higher than the empty weight of the vehicle, valid in all member jurisdictions. A hunter permit moves an empty truck from one fleet to another without violating registration statutes. Plan section 620 covers temporary evidence of apportioned registration while the permanent credentials are issued, good for up to 60 days. On the IFTA side, rule R650 provides a 30-day temporary decal permit for a licensee vehicle awaiting decals, vehicle specific, carried in the vehicle.

The honest rule is simple. One or two interstate trips a year: price permits first, because they usually win. A few trips a year: price both, because the answer turns on the states plus the caps. Monthly or more: register, because permits cost more plus the caps will catch you. The checker gives the permit advice from the trip frequency you enter. The Trip Permit Checker prices the exact route.

What do I get when I register?

Under IRP, the base jurisdiction issues one apportioned plate plus one cab card per power unit. Those two items are the sole registration credentials for the vehicle. Plan section 600 says so directly: upon registration, the base jurisdiction shall issue a Cab Card plus a Plate. These shall be the sole registration Credentials issued for the Vehicle. The plate carries the word apportioned, APP, or PRP, plus the name of the base jurisdiction. The cab card lists the member jurisdictions plus the registered weight for each. The cab card must be carried in the vehicle: a paper original, a legible paper copy, or a legible electronic image all count. Every member jurisdiction must accept whichever form is presented.

Under full reciprocity, one plate plus one cab card covers all 59 member jurisdictions. Before January 1, 2015, a carrier picked the jurisdictions it wanted on the cab card plus paid for those. The Full Reciprocity Plan ended that: every apportioned vehicle is now registered in every member jurisdiction. The fee follows the distance actually run. A carrier no longer adds a jurisdiction to the cab card before running there. The cab card already covers it. What changes with a new lane is the distance report at renewal, which shifts the fee split.

Under IFTA, the base jurisdiction issues one license plus two decals per qualified vehicle. The license covers the carrier; the decals go on the truck, one on the outside of each side of the cab, under rule R625. A copy of the license rides in each qualified vehicle, in paper or electronic form, under rule R620. The license plus decals run for the calendar year under rule R610. The prior year credentials may be displayed through January plus February under the rule R655 grace period. Renewal is annual, generally by December 31. The renewal carries the new year decals.

Both sets of credentials are issued by the base jurisdiction only. No other jurisdiction issues an apportioned plate or an IFTA license for the same vehicle. That single-issuer rule is the whole point of both agreements: one application, one fee calculation, one set of credentials, valid everywhere. It is also why the base jurisdiction choice matters as much as it does, which the next section covers.

How do I pick a base jurisdiction?

For IRP, Plan section 305 sets a three-part test. All three parts must be met. The applicant may elect as its base jurisdiction any member jurisdiction where the applicant has an established place of business, where the fleet it seeks to register accrues distance, plus where the records of the fleet are maintained or can be made available. The commentary stresses that all three parts must hold: a state where the fleet runs but the carrier has no business presence does not qualify. A state where the carrier has an office but the fleet never runs does not qualify either. When more than one jurisdiction qualifies, the applicant chooses among them, though the section is not intended to let a registrant manipulate the choice to avoid paying apportionable fees on 100 percent of the fleet distance.

The established place of business test was tightened effective October 1, 2025. Carriers working from older guidance should read the current text. It now means a physical structure located within the base jurisdiction, owned or leased for no less than 12 months, with clear company signage plus posted hours of operation, open for business plus staffed a minimum of 20 hours per week by one or more persons employed by the applicant on a permanent basis, for the general management of the trucking-related business. The Plan lists the qualifying activities: logistics planning, fleet management, driver management, load handling, regulatory compliance, customer service, plus technology integration. Credentialing, distance plus fuel reporting, plus answering telephone inquiries alone do not count as general management.

Virtual plus shared offices do not qualify. The Plan says so twice: virtual or shared office spaces shall not qualify for established place of business purposes. Shared or virtual offices shall not be used to qualify. A shared office is a space where multiple businesses share common facilities plus resources. A virtual office provides an address plus communication services without a physical office space. Both fail because the registrant is not actually located at the address other than to meet the physical address requirement. One exception is written into the commentary: where the same owner owns multiple registrants or businesses plus operates each from the same location, that is not a shared office, provided the other requirements are met.

For a carrier with no established place of business anywhere, section 305(c) offers residence instead. The applicant may designate as base jurisdiction any member jurisdiction where it can demonstrate residence, where the fleet accrues distance, plus where the records are maintained or can be made available. Section 305(d) sets the proof: a resident driver license or non-driver identification, plus at least two of seven items reflecting the declared address, including federal income tax returns filed from the address, personal income taxes paid to the jurisdiction, real estate or personal property taxes paid there, utility bills in the applicant name, a vehicle titled or registered there, corporate principal owner residence, or other factors clearly evidencing legal residence. The residence route is the normal path for a home-based owner-operator. The checker gives residence-based advice when home based is selected.

For IFTA, rule R212 sets a similar three-part base test: the member jurisdiction where the qualified motor vehicles are based for vehicle registration purposes, where operational control plus operational records are maintained or can be made available, plus where some travel is accrued. Most carriers use the same base jurisdiction for IRP plus IFTA, which keeps one renewal calendar plus one record location. The agreements do not require the same base, but running two bases doubles the paperwork for no benefit in most cases.

What records do IRP and IFTA require?

The two agreements set different record periods. The difference is a trap for carriers that file both. IRP Plan section 1000 requires the registrant to retain the records on which the apportioned registration application is based for three years following the close of the registration year to which the application pertains. The registrant must make the records available for audit on request. IFTA requires four years from the return due date or filing date, whichever is later. A carrier holding both credentials keeps IRP records three years plus IFTA records four, measured from different starting dates. The safe habit is four years for everything, measured from the later date.

What counts as a record is the distance plus fuel evidence behind the filings: trip sheets, odometer readings, fuel receipts, plus the mileage summaries the applications rest on. Plan section 1005 sets the adequacy standard. Section 1015 sets the price of failing it. If the records produced for audit do not meet the standard for the fleet as a whole, or if the registrant produces no records within 30 calendar days of a written request, the base jurisdiction imposes an assessment of 20 percent of the apportionable fees paid for the fleet in the registration year the records pertain to. A second offense known to the base jurisdiction draws 50 percent. A third offense, plus any subsequent offense, draws 100 percent. The assessment is the only penalty provision in the Plan for inadequate records. The commentary adds that it is not imposed where the records, though poor or inconsistent, can still be audited, or where only some individual vehicles lack records while the fleet audit can proceed.

Audits are a standing duty, not a rare event. Plan section 1025 requires each member jurisdiction to conduct audits equivalent to an average of three percent per year of the fleets whose registration it renews annually. A carrier should assume an audit will come, keep the records in order from day one, plus treat the distance report as a document an auditor will read. One correction is worth recording here: the three percent audit average sits in Plan section 1025, on the frequency of audits, not in section 1020, which covers the scope of audits only. Some secondary sources cite section 1020 for the figure. The Plan text puts it in section 1025.

On the IFTA side, the filing calendar is quarterly. Returns plus payment are due the last day of the month after each quarter, under rule R960: April 30, July 31, October 31, plus January 31. When the due date falls on a Saturday, Sunday, or legal holiday, the next business day is the due date. A return must be filed even with no operations in the quarter, under rule R930, so a parked fleet still files. A late return costs 50 dollars or 10 percent of the delinquent tax, whichever is greater, under rule R1220. Interest runs at 9 percent a year for 2026, 0.75 percent a month, with a partial month counted as a whole month, under rule R1230, set each January 1 from the IRS underpayment rate plus two points. The IFTA Fuel Tax Estimator page carries a deadline tracker that counts down the next due date plus logs each quarter filed.

QuarterReturn dueNote
Q1, January to MarchApril 30Next business day when April 30 is a weekend or holiday
Q2, April to JuneJuly 31Next business day when July 31 is a weekend or holiday
Q3, July to SeptemberOctober 31Next business day when October 31 is a weekend or holiday
Q4, October to DecemberJanuary 31Next business day when January 31 is a weekend or holiday

What does IRP and IFTA cost?

IRP has no fixed price. Plan section 400 sets the formula: the apportionable fee for a fleet in a member jurisdiction is the apportionment percentage for that jurisdiction multiplied by the total apportionable fee that jurisdiction charges for full registration of the fleet for the registration year. The apportionment percentage is the share of fleet distance run in that jurisdiction. A carrier running 40 percent of its miles in Illinois pays 40 percent of the Illinois full annual fee for each truck, plus the apportioned share of every other jurisdiction in the same way. The total is the sum across jurisdictions. Plan section 410 adds that no member jurisdiction may require a minimum registration fee for an apportionable vehicle, though the base jurisdiction may charge for issuing credentials plus processing the application.

A new fleet has no prior-year distance to apportion from, so Plan section 320 fills the gap: the base jurisdiction bills the fleet on average per-vehicle distance, calculated from its own data for each member jurisdiction, updated by March 31 each year. The first-year IRP fee is an estimate built from averages, not a quote built from the miles the carrier ran. The second year reconciles against the distance actually run. A new carrier should budget for the estimate plus expect the second-year figure to move.

IFTA is not a fee at all. It is a reconciliation of fuel tax already paid at the pump against the tax owed in each jurisdiction, based on the miles run plus the gallons burned there. A carrier that buys most of its fuel in low-tax states but runs most of its miles in high-tax states owes a balance each quarter. A carrier that buys fuel where it runs may owe little or nothing, or may hold a credit. The IFTA Fuel Tax Estimator prices a quarter from miles plus gallons by state. The IRP Apportioned Plate Cost Estimator prices the plate from a mileage split plus declared weight, using verified 2026 state fee schedules. Run both before the first interstate trip: the plate cost plus the fuel tax together are the real price of going interstate.

Two more costs sit outside both agreements. The Heavy Vehicle Use Tax applies to highway motor vehicles at a taxable gross weight of 55,000 lb or more. Proof of payment, the stamped Form 2290 Schedule 1, is required before registration at that weight under 26 CFR 41.6001-2. The Form 2290 HVUT Tax Estimator works out the tax from the weight plus first-use month. Weight-distance taxes in Kentucky, New Mexico, Oregon, Connecticut, plus New York are separate state filings on top of IFTA, priced by the Weight-Distance Tax Checker. None of these is covered by an apportioned plate or an IFTA license.

How do you use the IRP vs IFTA Eligibility Checker?

Work through the fields in order. The tool updates with every change, so you can fix an answer and watch the verdicts change.

  1. Pick what the vehicle is used for.
  2. Enter the power unit axles plus weight.
  3. Say whether it runs in combination, plus the combination weight.
  4. Pick where the rig runs.
  5. Say how often it crosses into another member jurisdiction.
  6. Read the verdicts, then follow the action list.

Use the figures from the registration, not from memory. The gross vehicle weight or registered gross vehicle weight on the registration is the figure the tests use. A weight entered wrong gives a wrong verdict. Count the power unit axles only: a two-axle pickup pulling a tandem-axle trailer is still a two-axle power unit for the three-axle test.

Read the checks table before the action list. It shows each test separately, so you can see which test triggers the verdict and which exemption, if any, applies. A rig that needs IRP but not IFTA, or IFTA but not IRP, shows the split in the table before the verdicts spell it out.

Questions drivers ask

Do I need IRP if I only cross state lines a few times a year?

Yes, if the rig meets the tests: one trip into a second member jurisdiction is enough to trigger the duty. There is no minimum trip count in the Plan. The practical question is cost, not duty. With one or two trips a year, a registration trip permit plus a fuel permit per state per trip usually costs less than a year of apportioned registration plus quarterly IFTA filings. With a few trips a year, price both routes before deciding. Check each state permit cap first: Texas allows no more than five fuel permit entries per calendar year.

Does a two-axle pickup pulling a trailer need IRP and IFTA?

It depends on the combination weight. The combination test covers a power unit used in combination when the combination gross vehicle weight exceeds 26,000 lb. A pickup at 14,000 lb pulling a loaded trailer at 30,000 lb combined is an apportionable vehicle plus a qualified motor vehicle. It needs both credentials when it runs in two or more member jurisdictions. The same pickup pulling a light trailer at 22,000 lb combined is under the line. Trailer axles never count toward the three-axle test: only the power unit axles do.

Do I need IFTA if I already have IRP plates?

Usually yes. IRP covers registration, IFTA covers fuel tax. One does not include the other. A carrier with apportioned plates running a qualified motor vehicle in two or more IFTA jurisdictions needs an IFTA license on top of the plates. The one common exception is the one-state-plus-DC run: the District of Columbia is an IRP member but not an IFTA member, so that run needs plates but no license.

Is a motor home exempt from IRP and IFTA?

Yes, when it is used for personal pleasure or personal travel only, not in connection with any commercial endeavor. The IRP Plan expressly excludes recreational vehicles from the apportionable vehicle definition. IFTA rule R245 expressly excludes them from the qualified motor vehicle definition. The exemption ends the moment the vehicle is used for business: a motor home hired out or used to haul for pay is no longer a recreational vehicle under either agreement.

What is the difference between a trip permit and a fuel permit?

A trip permit covers registration: IRP Plan section 525 lets a member jurisdiction issue one in lieu of apportioned or full registration. A fuel permit covers fuel tax: IFTA rule R310 lets a carrier satisfy motor fuel use tax obligations on a trip-by-trip basis instead of holding an IFTA license. One does not cover the other. A truck with neither credential needs both permits per state per trip. Each state sets its own permit price, validity, plus annual cap.

What happens if I run interstate without IRP or IFTA?

The vehicle runs without valid registration in each state it enters, plus without a fuel tax license, which means a citation at a roadside check plus a forced permit purchase on the spot. On the IFTA side, a late return costs 50 dollars or 10 percent of the delinquent tax, whichever is greater, under rule R1220, plus interest at 9 percent a year for 2026 under rule R1230. On the IRP side, inadequate records draw an assessment of 20 percent of the apportioned fees on the first offense, 50 percent on the second, 100 percent on the third, under Plan section 1015. Run the trip on permits or register before the trip: the roadside is the expensive place to sort it out.

Related tools

Sources

Follow on WhatsApp Ask by Voice