Planning estimate, not an invoice. This estimator prices apportioned registration fees only, from verified 2026 fee schedules for 23 jurisdictions. Your base jurisdiction invoice is authoritative. It adds plate, cab card and administrative fees, prorates for the month you register and applies the rules of each jurisdiction.
Enter your base jurisdiction, weight and miles. Every answer updates as you change each field.
The truck
A new fleet with no distance in the reporting period is billed on the base jurisdiction average per-vehicle distance, not on a split you submit. Use your expected split for planning only.
Miles by jurisdiction
Use the reporting period miles: the 12 months ending June 30 of the year before the registration year. Add one row per jurisdiction. Where a fee field appears, the fee is not verified for that jurisdiction at this weight, so enter the full annual fee from the agency schedule or your last invoice.
Estimated apportioned registration: $2,298.25 per truck
4 jurisdictions, 100,000 total miles, 100.0 percent of miles priced.
Per truck: $2,298.25
Fleet total: $2,298.25 ยท 100.0 percent of miles priced
| Jurisdiction | Miles | Share | Full fee | Apportioned |
|---|---|---|---|---|
| Illinois | 40,000 | 40.000% | $2,890.00 | $1,156.00 |
| Indiana | 25,000 | 25.000% | $1,692.00 | $423.00 |
| Ohio | 20,000 | 20.000% | $1,395.00 | $279.00 |
| Pennsylvania | 15,000 | 15.000% | $2,935.00 | $440.25 |
Component fees not included
- Indiana: CVET is separate: $540 for 78,001 lb and over, 2026 schedule.
Fee sources
- Illinois: 625 ILCS 5/3-815(a).
- Indiana: IN BMV Fee Chart rev. 1/1/26; IC 9-18.1-5-9.
- Ohio: ORC 4503.65(A)(21).
- Pennsylvania: PennDOT MV-70S (Jan 2026).
Notes
- This total covers apportioned registration fees only. Plate, cab card and administrative fees, HVUT, UCR and IFTA are separate.
This estimator applies Plan Section 400 to your answers: the apportioned fee of each jurisdiction is the apportionment percentage times the full annual fee for your weight. It is not legal advice. Confirm the fees with your base jurisdiction before you rely on a result.
Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.
Disclaimer: This tool is provided for general information only. It is not legal, tax or registration advice โ check the current fee schedule with your base jurisdiction before you rely on a result.
Quick answer: An apportioned plate costs about $2,298 per truck per year for a typical 80,000 lb truck running Illinois, Indiana, Ohio and Pennsylvania, but your figure depends on your mileage split and your weight. IRP charges the full annual registration fee for your weight in each jurisdiction, multiplied by the share of your fleet miles driven there. This estimator holds verified 2026 fees for 23 jurisdictions and lets you enter the fee for the rest. It is a planning estimate. Your base jurisdiction invoice is authoritative.
How does IRP apportionment work?
The International Registration Plan is a registration agreement among 48 contiguous states, the District of Columbia and 10 Canadian provinces. A carrier registers a truck once, in its base jurisdiction. It pays each member jurisdiction a share of its full registration fee. The share matches the share of fleet miles driven in that jurisdiction. One plate and one cab card cover the truck in every member jurisdiction.
The math is one line per jurisdiction. Take the miles the fleet ran in a jurisdiction during the reporting period and divide by the total fleet miles. That ratio is the apportionment percentage. Multiply it by the full annual registration fee for the truck weight in that jurisdiction. The result is the apportioned fee for that jurisdiction. Add the lines to get the total per truck.
The Plan sets the rounding. The ratio is calculated to six decimal places, rounded to five decimal places and multiplied by 100. A small rounding difference changes the fee by cents, not dollars, but the invoice uses the Plan rounding and so does this estimator.
The reporting period is the 12 months ending June 30 of the year before the registration year. A registration year that starts in January 2027 is billed on miles run from July 1, 2025 to June 30, 2026. A new fleet with no distance in that window is billed on the base jurisdiction average per-vehicle distance, which the base jurisdiction publishes from its own prior-year data.
Since January 1, 2015, every cab card lists all 59 member jurisdictions. That change is called full reciprocity. A carrier no longer declares states in advance. It reports actual distance and pays only where distance was reported. A jurisdiction with zero miles on the application costs nothing.
What is the cab card and the apportioned plate?
The base jurisdiction issues two credentials for each apportioned vehicle: a cab card and a plate. Plan Section 600 calls them the sole registration credentials for the vehicle. The plate carries the word apportioned, APP or PRP, plus the name of the base jurisdiction. The plate number system and color follow base jurisdiction law.
The cab card must be carried in the vehicle. It lists the registered weight for each member jurisdiction. A base jurisdiction may issue the cab card on paper or as an electronic image. Every member jurisdiction must accept a paper original, a legible paper copy or a legible electronic image, whichever the driver presents.
No credentials issue until the fees are paid. Plan Section 600(f) bars the base jurisdiction from issuing credentials until the registrant has paid all apportioned fees due or past due. A base jurisdiction may issue temporary evidence of registration while credentials are prepared. That temporary evidence lasts no more than 60 calendar days and every member jurisdiction must recognize it.
Renewal works the same way. The base jurisdiction may issue a renewal plate, a renewal decal for the existing plate or only a renewal cab card. The choice follows base jurisdiction law. The cab card stays the document an inspector asks for at the roadside.
Who needs IRP plates?
A power unit needs apportioned registration when it runs in two or more member jurisdictions and meets the weight test. The Plan calls such a vehicle an apportionable vehicle. The test has three branches. A power unit with two axles and a gross vehicle weight or registered gross vehicle weight over 26,000 lb qualifies. A power unit with three or more axles qualifies at any weight. A combination over 26,000 lb qualifies.
Recreational vehicles, vehicles with restricted plates and government vehicles are excluded. A vehicle at or under 26,000 lb may still register under the Plan by choice. A carrier that runs only inside one jurisdiction does not need apportioned plates. It registers under the rules of that jurisdiction instead.
Trailers are not apportioned. A trailer is not a power unit, so the Plan does not cover it. Trailers register under separate state programs. The estimator prices power units only. A fleet of five tractors and eight trailers pays apportioned fees for five vehicles.
The weight you declare decides the fee. Most fee schedules are tiered by weight. The top tier is usually 80,000 lb. A truck registered at 80,000 lb pays the top-tier fee in every jurisdiction. A truck registered at a lower weight pays less where the schedule has a lower tier.
The estimator holds fees for the weight bracket each fee covers. Below that bracket it asks you to enter the fee. Check the axle spacing against the Bridge Formula Axle Weight Checker before you declare a weight.
How do you choose a base jurisdiction?
The base jurisdiction is the member jurisdiction where the carrier registers the fleet and pays the whole invoice. Plan Section 305(a) sets a three-part test: an established place of business there, distance accrued there and records kept or available there. All three parts must hold. The test applies to the fleet as a whole, not to each vehicle.
The established place of business rule tightened on October 1, 2025. Section 305(b) now requires a physical structure owned or leased for at least 12 months, with a street address, clear company signage and posted hours of operation. The structure must be open for business and staffed at least 20 hours a week by one or more permanent employees who manage the trucking business. Virtual offices and shared office spaces do not qualify. A lease for credentialing or phone answering alone does not qualify.
The Plan states its intent plainly. The official commentary to Section 305 says it is not the intent of the section to permit a registrant to manipulate the selection of a base jurisdiction. A carrier cannot pick a low-fee state as its base without a real place of business there. The base jurisdiction checks the proofs before it opens the account.
A carrier with no established place of business anywhere falls back to residence. Section 305(c) and (d) let the carrier base where it can demonstrate residence: a resident driver license or non-driver identification card, plus at least two of seven listed proofs, such as tax returns filed from the address, utility bills or a vehicle titled there. The residence route is a fallback, not a shortcut.
Your base choice also decides who collects the money. The base jurisdiction issues one invoice for the whole fleet, collects every jurisdiction share and distributes the money. The estimator asks for the base first because the base decides the invoice and the audit. A base with no miles in your split draws a warning in the results.
What does an apportioned plate cost?
There is no flat price. The cost is the sum of one line per jurisdiction. Each line is the full annual fee times the mileage share. A truck that runs mostly in low-fee states pays less than the same truck running mostly in high-fee states. The worked example below uses the estimator defaults: an 80,000 lb truck based in Illinois, running 100,000 miles across four states.
| Jurisdiction | Miles | Share | Full fee | Apportioned |
|---|---|---|---|---|
| Illinois | 40,000 | 40.000% | $2,890.00 | $1,156.00 |
| Indiana | 25,000 | 25.000% | $1,692.00 | $423.00 |
| Ohio | 20,000 | 20.000% | $1,395.00 | $279.00 |
| Pennsylvania | 15,000 | 15.000% | $2,935.00 | $440.25 |
| Total | 100,000 | 100% | $2,298.25 |
The total is $2,298.25 per truck for the year. Pennsylvania shows why the mileage split matters more than the fee list. Its full fee is the highest of the four at $2,935, but only 15 percent of the miles run there, so it contributes $440.25. Illinois contributes the most at $1,156.00 because 40 percent of the miles run there. The gap between states is real money: move 10,000 miles from Texas, where the full fee is $840, to Pennsylvania at $2,935. The yearly total rises by $209.50.
The Connecticut DMV manual prints a worked example that checks the method. An 80,000 lb vehicle ran 86,027 miles, with 54,923 miles in Connecticut. The Connecticut share is 63.844 percent. The Connecticut full fee is $1,546, so the apportioned Connecticut fee is $987.03. This estimator reproduces that figure exactly. Run the same split through the tool and the Connecticut line reads $987.03.
Published fee figures go stale fast, so check the date on any figure you find elsewhere. A worked example on a compliance site updated November 3, 2026 still used Indiana $1,650, Illinois $2,790, Ohio $1,260 and Pennsylvania $1,720. Every one of those figures is out of date. The current verified fees are Indiana $1,692, Illinois $2,890, Ohio $1,395 and Pennsylvania $2,935. The Pennsylvania figure alone is $1,215 higher than the stale example. The estimator shows the source and the verification date for every fee it holds.
Fold the plate cost into the per-mile math. A $2,298 plate cost spread over 100,000 miles is 2.3 cents per mile. The Per-Mile Profit Calculator shows what a load really earns after every cost per mile, including registration.
Why do IRP fees differ so much by state?
Each member jurisdiction sets its own registration fee. The Plan does not cap it. At 80,000 lb the verified full-year fees run from $725 in Georgia for a for-hire truck to $2,935 in Pennsylvania. Texas charges $840 and Illinois charges $2,890. The same truck costs four times as much to register in Pennsylvania as in Georgia. The mileage split decides how much of that gap reaches your invoice.
Some fees are only one component. California $2,064 is the weight-fee component. The $122 motor vehicle fee, the $73 registration fee, the CHP fee and the value-based vehicle license fee sit on top. Arizona $918 is the gross-weight fee component. Wyoming $907.50 is the state fee component, with a county fee or an equalized highway use tax on top. The estimator flags every component fee on the results table.
Some states add charges the registration fee does not show. West Virginia adds an ad valorem fee based on purchase price and vehicle age. Indiana adds a commercial vehicle excise tax, Kansas adds a commercial vehicle fee and Georgia adds an alternative ad valorem tax at the top bracket. Oregon charges a weight-mile tax on top of registration. The estimator lists each add-on under the results so the total is not mistaken for the whole bill. The Oregon Weight-Mile Tax Calculator works out the Oregon weight-mile tax for a trip or a quarter.
A few states cannot be priced from a published schedule at all. Colorado charges a value-based specific ownership tax, so the real cost depends on the truck value. Montana fee depends on vehicle age. Two official texts disagree on the current schedule. Tennessee published figures do not reconcile. For those jurisdictions the estimator says so and lets you enter the fee from your own invoice or the agency schedule.
| Jurisdiction | Full-year fee at 80,000 lb | Source |
|---|---|---|
| Arkansas | $1,553 | Ark. Code Ann. 27-14-601(a)(3)(G)(ii) |
| Arizona | $918 | ARS 28-5433, weight fee only |
| California | $2,064 | Cal. Veh. Code 9400.1(c)(1), weight fee only |
| Connecticut | $1,546 | CT DMV IRP Manual rev. 2026-01 |
| Florida | $1,322 | F.S. 320.08(4)(l) |
| Georgia | $725 for-hire, $400 private | O.C.G.A. 40-2-152 |
| Illinois | $2,890 | 625 ILCS 5/3-815(a) |
| Indiana | $1,692 | IN BMV Fee Chart rev. 1/1/26 |
| Kansas | $1,870 | K.S.A. 8-143 |
| Minnesota | $1,760 | Minn. Stat. 168.013 subd. 1e |
| Nebraska | $1,340 | Neb. Rev. Stat. 60-3,198(1)(b)(ii), $33.50 per ton |
| New Hampshire | $884.21 | RSA 261:141(III)(h), per 100 lb formula |
| New Jersey | $1,267.50 | NJ MVC Code 11 fees |
| New York | $1,208.00 | NY DMV IRP-8 (rev. 3/25) |
| North Dakota | $1,059 | NDCC 39-04-19, 1st to 6th year |
| Ohio | $1,395 | ORC 4503.65(A)(21), apportioned rate |
| Oregon | $998 | ODOT form 735-6013 (6-26) |
| Pennsylvania | $2,935 | PennDOT MV-70S (Jan 2026) |
| Rhode Island | $1,044 | R.I. Gen. Laws 31-6-1(a)(3)(xxxi), formula |
| Texas | $840 | Tex. Transp. Code 502.253 |
| Virginia | $1,328.00 for-hire, $1,321.60 private | Va. Code 46.2-697 |
| West Virginia | $1,131.25 | WV DMV Commercial Vehicle Manual 2025 |
| Wyoming | $907.50 | W.S. 31-18-401(a)(ii)(A) and (a)(iii), state fee only |
All fees verified November 19, 2026. Fees change annually. The estimator carries a review date and a stale warning. The fee table is refreshed when a jurisdiction publishes a new schedule.
What does this estimate leave out?
The estimate covers apportioned registration fees only. It leaves out every other charge that lands on the same invoice or the same truck. The plate fee, the cab card fee and the application fee are set by the base jurisdiction and added on top. Plan Section 410(b) and Section 600(d) both allow the base jurisdiction to charge for credentials. Those fees are small beside the registration total, but they are real.
The heavy vehicle use tax is separate. Form 2290 tax runs from $100 at 55,000 lb to a $550 maximum over 75,000 lb. The state will not register the truck without proof of payment. The Unified Carrier Registration fee is separate. IFTA fuel tax is separate and filed quarterly. None of those figures appear in this estimate.
New York also charges a highway use tax on heavy trucks, filed separately from registration. The New York HUT Calculator works out that tax.
Mid-year registration is prorated. A truck added to a fleet during the registration year pays from the first day of the month it joins, unless the member jurisdiction sets a different rule. The estimator prices a full year. Prorate the result by the months left in your registration year.
The estimate also leaves out the charges that sit beside registration in a first-year budget: insurance, the $300 OP-1 filing, UCR, an ELD and the truck itself. The Cost Stack Calculator builds the full first-year total from the official fee schedules. The Trucking Company Startup Cost Estimator covers paperwork, truck, insurance and working capital in one total.
Do you need Form 2290 before IRP registration?
Yes, for a truck at 55,000 lb taxable gross weight or more. Federal law bars a state from registering a heavy highway motor vehicle without proof that the heavy vehicle use tax was paid or suspended. The proof is the stamped or watermarked Schedule 1 from Form 2290. The rule sits in 26 CFR 41.6001-2. A state that registers without proof risks federal highway funds.
The tax year runs July 1 to June 30. A truck first used in July pays the full year and the return is due August 31. A truck first used later pays only for the months left in the tax year. The tax is $100 at 55,000 lb, plus $22 for each 1,000 lb over 55,000, up to a $550 maximum over 75,000 lb. Logging vehicles pay 75 percent of the standard rate.
One exception covers a new purchase. A state may register a vehicle bought within the last 60 days without the Schedule 1, when the buyer shows the bill of sale. The exception is in 26 CFR 41.6001-2(b)(2). It buys time at the counter. It does not remove the filing duty. The return is still due by the last day of the month after the month of purchase.
A suspended vehicle still files. A truck expected to run 5,000 miles or fewer in the tax year, or 7,500 miles for an agricultural vehicle, owes no tax but must still file Form 2290 and still needs the stamped Schedule 1 to register. The Form 2290 HVUT Tax Estimator works out the tax for any weight and first-use month, including the logging rate and the suspended case.
When is a trip permit cheaper than apportionment?
Apportionment pays for every jurisdiction on the cab card where the fleet ran miles. A trip permit pays for one jurisdiction for one trip. Plan Section 525 lets each member jurisdiction issue trip permits in place of apportioned or full registration. The permit covers interjurisdiction and intrajurisdiction operation. For a state the truck enters once or twice a year, a trip permit usually costs less than the apportioned share of that state annual fee.
The break-even point is simple arithmetic. A trip permit covers one jurisdiction for a few days at a flat fee set by that jurisdiction. A state at 1 percent of miles on a $2,000 full fee costs $20 as apportionment. A state at 5 percent costs $100. Below the break-even point the permit wins. Above it the cab card wins, since it already covers the state for the rest of the year.
A trip permit also avoids paperwork. No mileage report, no audit exposure for that state and no fee schedule to check. The cost is the stop to buy the permit and the risk of running without one. A truck caught in a jurisdiction without registration or a permit faces a fine and a possible out-of-service order. The Trip Permit Checker works out when a permit beats apportionment for a single state.
An unladen move has a third option. Plan Section 530 requires each member jurisdiction to provide a hunter permit: temporary registration for an empty vehicle, at a minimum fee, valid in all member jurisdictions. A driver moving an empty truck between fleets uses a hunter permit, not a trip permit and not a full apportionment.
What records must you keep for IRP audits?
Keep the records behind the application for three years after the close of the registration year. Plan Section 1000 sets that rule. The records must let the base jurisdiction verify the distances reported on the application and judge whether the distance accounting system is accurate. Trip sheets, fuel receipts, toll records, ELD logs and dispatch records all count, in any format the base jurisdiction can audit.
Electronic records must be accessible. A spreadsheet, a CSV file or a delimited text file counts as accessible. A static image such as a PDF, a JPEG or a Word document does not count as accessible under the Plan. The distinction matters at audit time. A carrier that keeps only scanned images may find its records ruled inadequate.
Each member jurisdiction audits an average of three percent of the fleets it renews each year. Plan Section 1020 sets that average. An audit can cover any registration year inside the three-year retention window. The auditor checks the reported distances against the records and can assess a deficiency or grant a refund for any year the records cover.
Inadequate records carry a penalty. Plan Section 1015 sets the assessment at 20 percent of the apportioned fees paid for the registration year when the records as a whole cannot be audited, or when no records arrive within 30 calendar days of a written request. A second offense costs 50 percent. A third offense costs 100 percent. The base jurisdiction distributes the assessment to the other jurisdictions pro rata. The assessment does not apply when the records, even poor ones, can still be audited.
The DOT Record Retention Checker lists how long each record type must be kept across the DOT rules, including the three-year IRP window. Keep the IRP records with the IFTA records. Both systems audit the same miles.
How does IRP differ from IFTA?
IRP is registration. IFTA is fuel tax. The two systems share the mileage split but charge for different things. IRP charges a share of the annual registration fee of each jurisdiction. IFTA charges fuel tax on the gallons burned in each jurisdiction, at the tax rate of that jurisdiction, with a credit for tax already paid at the pump. A carrier needs both: one does not replace the other.
The filing rhythm differs too. IRP is annual: one application, one invoice, one plate and one cab card per truck. IFTA is quarterly: four returns a year, one license and one set of decals per truck. The IRP reporting period runs July to June. The IFTA quarters run on the calendar year. The same ELD miles feed both filings, which is why clean trip records matter twice.
The base jurisdiction can differ between the two systems, but it usually does not. Most carriers base both in the same jurisdiction, where the place of business sits. A carrier that moves its base for one system should check the other. The IFTA Fuel Tax Estimator works out the quarterly fuel tax from the same mileage split this estimator uses.
The official IRP fee estimator is worth knowing about. IRP Inc. publishes the Celtic Fee Estimator on its own site, built by Celtic Systems. It estimates the same fees from the same distance shares but leaves out base jurisdiction administrative fees. This estimator competes on plain English and on showing the source and the date for every fee. Use either one. The base jurisdiction invoice is the number that counts.
How do you use the IRP Apportioned Plate Cost Estimator?
- Pick your base jurisdiction and enter the declared gross weight in pounds. The weight decides which fee bracket applies in each jurisdiction.
- Pick for-hire or private operation and enter the number of power units. Add a row for each jurisdiction where the fleet ran miles.
- Enter the miles for each jurisdiction from the reporting period. The estimator works out the share for each jurisdiction from the total.
- Where a jurisdiction shows a fee field, enter the full annual fee from the agency schedule or your last invoice. The estimator prices the other jurisdictions from verified fees.
- Read the total per truck, the fleet total and the table. The table shows the share, the full fee and the apportioned fee for each jurisdiction.
- Copy the summary for your records, or reset the estimator to start over. Check the notes for component fees and for any jurisdiction the estimator could not price.
Frequently asked questions
How much does an IRP apportioned plate cost?
There is no flat price. The cost is the sum of one line per jurisdiction: the full annual registration fee times the share of fleet miles in that jurisdiction. A typical 80,000 lb truck running Illinois, Indiana, Ohio and Pennsylvania pays about $2,298 per truck per year. A truck running mostly in low-fee states pays less. A truck running mostly in high-fee states pays more.
What weight needs IRP plates?
A power unit needs apportioned registration when it runs in two or more member jurisdictions and has two axles with a gross vehicle weight over 26,000 lb, or three or more axles at any weight, or a combination over 26,000 lb. A vehicle at or under 26,000 lb may register under the Plan by choice. Trailers are not apportioned.
Can I pick any state as my base jurisdiction?
No. Plan Section 305(a) requires an established place of business in the base jurisdiction, distance accrued there and records kept or available there. Since October 1, 2025 the place of business must be a physical structure owned or leased for at least 12 months, staffed at least 20 hours a week by permanent employees. Virtual offices do not qualify.
Do I need Form 2290 before I get IRP plates?
Yes, at 55,000 lb taxable gross weight or more. Federal law bars a state from registering the truck without proof of heavy vehicle use tax payment. The proof is the stamped or watermarked Schedule 1 from Form 2290. A vehicle bought within the last 60 days may register without it when the buyer shows the bill of sale.
What happens if my IRP records fail an audit?
Plan Section 1015 sets an assessment of 20 percent of the apportioned fees for the registration year when the records as a whole cannot be audited, or when no records arrive within 30 calendar days of a written request. A second offense costs 50 percent. A third costs 100 percent. Keep the records for three years after the close of the registration year.
Is there an official IRP fee estimator?
Yes. IRP Inc. publishes the Celtic Fee Estimator on its own site. It estimates the same apportioned fees from the same distance shares and leaves out base jurisdiction administrative fees. This estimator shows the source and the verification date for every fee it holds. The base jurisdiction invoice is authoritative either way.
Related tools
- Form 2290 HVUT Tax Estimator: work out the heavy vehicle use tax before you file, including the logging rate and the suspended case.
- IFTA Fuel Tax Estimator: work out the quarterly fuel tax from the same mileage split.
- Trip Permit Checker: see when a trip permit beats apportionment for a single state.
- DOT Record Retention Checker: see how long each record type must be kept across the DOT rules.
- Cost Stack Calculator: build the full first-year cost total from the official fee schedules.
- Trucking Company Startup Cost Estimator: cover paperwork, truck, insurance and working capital in one total.
- Trucking Tools: browse every free calculator on Trucking Mind.
Sources
- International Registration Plan, as amended effective October 1, 2025. cdn.ymaws.com/www.irponline.org/resource/collection/849D5CCF-8986-4CF7-AA27-19413789F6EB/IRP_Agreement_-_Effective_10-1-2025.pdf Accessed November 19, 2026.
- International Registration Plan Inc., Celtic Fee Estimator. irponline.org/page/FeeEstimator Accessed November 19, 2026.
- 26 CFR 41.6001-2, Proof of payment for State registration purposes. law.cornell.edu/cfr/text/26/41.6001-2 Accessed November 19, 2026.
- Connecticut Department of Motor Vehicles, International Registration Plan Manual, Revision 2026-01, August 24, 2026. portal.ct.gov/-/media/DMV/IRP/IRP-external-user-guide.pdf Accessed November 19, 2026.
- New York State Department of Motor Vehicles, IRP-8 Apportioned Registration Manual, revised March 2025. dmv.ny.gov/forms/irp8.pdf Accessed November 19, 2026.
- Georgia Department of Revenue, IRS HVUT 2290 Checklist. dor.georgia.gov/irs-hvut-2290-checklist Accessed November 19, 2026.
- Texas Department of Motor Vehicles, Schedule of Fees for Registration Classifications of Combination Vehicles. txdmv.gov/sites/default/files/body-files/FeeSchedule_CombinationAndTokenTrailer.pdf Accessed November 19, 2026.