Skip to main content

Trucking Mind

One trigger is enough. This checker tests up to three materials against all 16 triggers in 49 CFR 172.800(b). If any one trigger fires, a transportation security plan that meets section 172.802 is required. The check covers the security plan duty only. Placards, PHMSA registration and the hazmat safety permit each have their own trigger lists.

Pick each material, enter the quantity, then read the verdict. Every answer updates as you change each field.

Material 1

Material 2 (optional)

Material 3 (optional)

Farmer exception

Security plan required

1 trigger fired under 49 CFR 172.800(b)

At least one listed material and quantity is present. A transportation security plan that meets 49 CFR 172.802 is required. The plan must be in place before the next shipment of a listed material.

Triggers that fired

  1. Trigger (6): A large bulk quantity of a Class 3 material meeting the criteria for Packing Group I or II. Largest single packaging: 1,000 gal.
CheckResultDetail
Material 1: Class 3 flammable liquid, PG I or IITriggers plan1,000 gal in one packaging is above the large bulk quantity line of 792 gal (section 172.800(b)(6)).

The figures

FigureValueNote
Material 1: largest single packaging1,000 galLarge bulk quantity starts above 792 gal in one packaging
Triggers fired1One trigger is enough to require a plan
Materials checked1Each material is tested against the 16 triggers

What the plan must contain

  • A transportation security risk assessment, including site-specific risks at facilities where the listed materials are prepared, stored or unloaded (section 172.802(a)).
  • Personnel security: measures to confirm information provided by job applicants hired for positions with access to and handling of the covered materials (section 172.802(a)(1)).
  • Unauthorized access: measures to address the risk that unauthorized persons gain access to the covered materials or transport conveyances being prepared (section 172.802(a)(2)).
  • En route security: measures to address the assessed security risks of shipments en route, including storage incidental to movement (section 172.802(a)(3)).
  • Identification by job title of the senior management official responsible for overall development and implementation of the plan (section 172.802(b)(1)).
  • Security duties for each position or department responsible for implementing the plan, plus the process for notifying employees when specific elements must be implemented (section 172.802(b)(2)).
  • A plan for training hazmat employees under section 172.704(a)(4) and (a)(5) (section 172.802(b)(3)).
  • The plan must be in writing, retained while in effect, reviewed at least annually and revised as necessary. The most recent version must be available to employees responsible for implementing it (section 172.802(c)).
  • A copy must be accessible at or through the principal place of business and made available on request to an authorized official of the Department of Transportation or the Department of Homeland Security (section 172.802(d)).

What to do

  • Write the security plan before the next shipment of a listed material. The plan must cover every listed material the operation offers or transports.
  • Name the senior management official responsible for the plan by job title (section 172.802(b)(1)).
  • Give in-depth security training under section 172.704(a)(5) to every employee who handles the covered materials, performs a regulated function related to them or is responsible for implementing the plan.
  • Set the annual review date now. The plan must be reviewed at least annually and revised as necessary (section 172.802(c)).
  • Keep a copy accessible at or through the principal place of business (section 172.802(d)).
  • Check the related duties too: PHMSA registration and the hazmat safety permit use different trigger lists.

Notes

  • One trigger is enough. The plan covers all listed materials the person offers or transports, not only the material that fired the trigger.
  • A large bulk quantity is measured in a single packaging, not across the whole vehicle. Two 500 gal totes of a Class 3 PG II liquid do not add up to a large bulk quantity.
  • The large bulk quantity line is strictly greater than 3,000 kg or 3,000 L. A packaging at exactly 3,000 kg or 3,000 L does not cross it.

This checker applies 49 CFR 172.800, 172.802, 172.704, 172.504 and 172.505(b) to your answers. Confirm the result against the current regulation and your company policy before you rely on it.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice — check the current regulation and your company policy before you rely on a result.

Quick answer: A hazmat security plan is required when a person offers or transports a listed material in a listed quantity under 49 CFR 172.800(b). The list has 16 triggers in three bands. Five triggers fire at any quantity: Division 1.1, 1.2 or 1.3 explosives; materials poisonous by inhalation; Type B temperature-controlled organic peroxides; select agents and toxins; IAEA or NRC Category 1 and 2 radioactive materials. Seven triggers fire at a large bulk quantity: more than 3,000 kg (6,614 lb) for solids or 3,000 L (792 gal) for liquids and gases in a single packaging. Four triggers fire when placarding is required. Placarding alone does not require a plan. Class 9 never triggers one. A small farmer exception applies under section 172.800(c). This checker tests up to three materials against all 16 triggers and lists what the plan must contain.

Last reviewed: · Focus keyword: hazmat security plan required

What is a hazmat security plan?

A hazmat security plan is a written plan that addresses security risks in the transportation of hazardous materials. The requirement comes from Part 172 Subpart I of the Hazardous Materials Regulations, sections 172.800 through 172.804. The plan starts with an assessment of transportation security risks, then sets out measures to address the risks found. It is a security document, not a safety document. Emergency response, safe handling and accident prevention are covered by other parts of the regulations.

The duty falls on each person who offers for transportation in commerce or transports in commerce one or more of the listed materials. That covers shippers and carriers alike. A carrier cannot rely on the shipper to hold the plan. A shipper cannot rely on the carrier. Each person with a listed material needs a plan of its own.

The rule dates to 2003, when the Department of Transportation first required security plans after the September 11 attacks. The original rule covered all placarded quantities. A 2010 revision narrowed the list to the 16 triggers in force today, focusing the rule on the materials that pose the highest security risk. The change means that most placarded loads do not need a security plan. Only the listed materials and quantities do.

A security plan is not a form to file. No agency approves it and no copy goes to the government in advance. The person who needs the plan writes it, keeps it at the principal place of business and makes it available on request to an authorized official of the Department of Transportation or the Department of Homeland Security. The plan must be in writing. It must be reviewed at least annually.

Which materials trigger a hazmat security plan?

Section 172.800(b) lists 16 triggers in three bands. The first band fires at any quantity. The second band fires at a large bulk quantity. The third band fires when placarding is required. A single trigger is enough. The plan then covers all listed materials the person offers or transports, not only the material that fired the trigger.

TriggerMaterialQuantity test
(1)Division 1.1, 1.2 or 1.3 materialAny quantity
(2)Division 1.4, 1.5 or 1.6 materialPlacarding required
(3)Division 2.1 materialLarge bulk quantity
(4)Division 2.2 material with a subsidiary hazard of 5.1Large bulk quantity
(5)Material poisonous by inhalationAny quantity
(6)Class 3 material, Packing Group I or IILarge bulk quantity
(7)Desensitized explosives (Division 4.1 or Class 3)Placarding required
(8)Division 4.2 material, Packing Group I or IILarge bulk quantity
(9)Division 4.3 materialPlacarding required
(10)Division 5.1 material PG I or II; perchlorates; ammonium nitrate compoundsLarge bulk quantity
(11)Organic peroxide, Type B, temperature controlledAny quantity
(12)Division 6.1 material, other than PIHLarge bulk quantity
(13)Select agent or toxin (CDC or USDA list)Any quantity
(14)Uranium hexafluoridePlacarding required under 172.505(b)
(15)IAEA Cat 1 or 2, NRC Cat 1 or 2 radioactive, highway route controlled quantityAny quantity
(16)Class 8 material, Packing Group ILarge bulk quantity

The list rewards close reading. Division 6.1 appears twice: a material poisonous by inhalation fires trigger (5) at any quantity, while other Division 6.1 materials fire trigger (12) only at a large bulk quantity. Class 3 appears in two bands too: a large bulk quantity of a Packing Group I or II liquid fires trigger (6), while a desensitized explosive that meets the definition of a Class 3 material fires trigger (7) at a placardable quantity. Packing group matters for Class 3, Division 4.2, Division 5.1 and Class 8. A Packing Group III liquid never fires trigger (6), however large the quantity.

The radioactive trigger is the widest of the any-quantity triggers. It covers IAEA Code of Conduct Category 1 and 2 materials, NRC Category 1 and Category 2 radioactive materials listed in Table 1 of appendix A to 10 CFR part 37. It also covers highway route controlled quantities as defined in 49 CFR 173.403. A carrier that hauls a highway route controlled quantity needs a security plan for that shipment and a hazmat safety permit as well. The Hazmat Safety Permit Checker tests the permit triggers.

What is a large bulk quantity?

A large bulk quantity is a quantity greater than 3,000 kg (6,614 pounds) for solids or 3,000 liters (792 gallons) for liquids and gases in a single packaging. The definition sits in the opening words of section 172.800(b). It applies to seven of the 16 triggers. The word greater matters: a packaging at exactly 3,000 kg or 3,000 L does not cross the line. The quantity must be above the figure, not at it.

Single packaging is the part that catches people out. The test applies to one packaging, such as a cargo tank motor vehicle, a portable tank, a tank car or another bulk container. It does not add up the whole vehicle. Two 500 gallon totes of a Class 3 Packing Group II liquid hold 1,000 gallons between them, but neither tote is a large bulk quantity. The same 1,000 gallons in one cargo tank crosses the line. A carrier that splits a load across small packagings can stay under the line. A carrier that moves the same material in one tank cannot.

The large bulk band is where ordinary fuel and chemical haulers meet the security plan rule. A gasoline cargo tank holds far more than 792 gallons. Gasoline is a Class 3 Packing Group II liquid, so a single cargo tank load fires trigger (6) and the carrier needs a security plan. The same applies to a cargo tank of ethanol at Packing Group II, a portable tank of a Packing Group I acid, or a tank of LPG, a Division 2.1 gas. Drivers who think of security plans as an explosives rule miss the band that covers their own loads.

The unit matters as much as the number. Solids are measured by weight and liquids and gases by volume. A solid measured in gallons means nothing under this definition. A liquid measured in pounds needs a density to convert. This checker asks for the physical form first, then offers only the units that fit the form. Enter the quantity in the largest single packaging on the vehicle. If the largest packaging is under the line, the smaller ones are too.

Do placarded loads always need a security plan?

No. Placarding and security plans are separate duties with separate trigger lists. A placard tells emergency responders what is on the vehicle. A security plan addresses the risk that the load is stolen or used as a weapon. Most placarded loads need no security plan. A placarded load of paint, a placarded load of batteries, or a placarded load of a Packing Group III solvent can travel with no security plan at all.

The confusion comes from the original 2003 rule, which required a security plan for all placarded quantities. The 2010 revision (75 FR 10974) replaced that broad test with the 16 triggers. Old guidance still circulates online. Some of it still states the pre-2010 rule as current law. Any page that says every placarded load needs a security plan is out of date.

Class 9 shows the gap most clearly. Class 9 miscellaneous hazardous materials include lithium batteries, dry ice, asbestos and environmentally hazardous substances. A Class 9 load can be placarded and still need no security plan, because Class 9 does not appear anywhere in the trigger list. The Hazmat Placard Checker answers the placard question. This checker answers the security plan question. Run both before a load rolls.

The placard band of the trigger list is the one place the two duties meet. Four triggers fire when placarding is required: Division 1.4, 1.5 or 1.6 explosives, desensitized explosives, Division 4.3 materials and uranium hexafluoride. For the first three, placarding turns on the Table 2 rule in section 172.504(c): no placard is required below 454 kg (1,001 pounds) aggregate gross weight of Table 2 materials on the vehicle. The weight is aggregate across all Table 2 materials, so a small load of Division 4.3 material can become placardable when combined with other Table 2 loads. Uranium hexafluoride follows its own placarding rule in section 172.505(b), which starts at 1,001 pounds gross weight.

One more placarding rule matters for the trigger list. A bulk packaging of a Table 2 material needs a placard at any quantity. The 1,001 pound exception in section 172.504(c) covers transport vehicles and freight containers, not bulk packagings. A bulk load of a Division 1.5 blasting agent or a Division 4.3 material fires its trigger at any quantity, because the placard is required at any quantity. This checker asks about packaging for that reason.

What must a hazmat security plan contain?

Section 172.802 sets out what the plan must contain. The plan starts with an assessment of transportation security risks for shipments of the listed materials, including site-specific risks at facilities where the materials are prepared for transportation, stored or unloaded incidental to movement. The measures in the plan must address the risks the assessment finds. The measures may vary with the threat level at a particular time.

At a minimum the plan must include three elements. Personnel security means measures to confirm information provided by job applicants hired for positions that involve access to and handling of the covered materials. The confirmation system must be consistent with federal and state laws on employment practices and individual privacy. Unauthorized access means measures to address the assessed risk that unauthorized persons may gain access to the covered materials or transport conveyances being prepared for transportation. En route security means measures to address the assessed security risks of shipments en route from origin to destination, including shipments stored incidental to movement.

The plan must also name the senior management official responsible for overall development and implementation of the plan, identified by job title. It must set out security duties for each position or department responsible for implementing the plan or a portion of the plan, plus the process for notifying employees when specific elements must be implemented. It must include a plan for training hazmat employees under section 172.704(a)(4) and (a)(5).

The regulation does not prescribe the measures in detail. A small carrier with one cargo tank and a national fleet with a hundred terminals both write plans under the same section, but the measures differ because the risks differ. What the regulation does require is that the measures match the assessed risks and that the three elements are present. It also requires that the plan is real: written, implemented and kept current. A plan that sits in a drawer unimplemented is not a plan under this section.

Who is exempt from the security plan rule?

One exception exists. It is narrow. Section 172.800(c) excepts the transportation activities of a farmer who generates less than $825,000 in 2025 dollars annually in gross receipts from the sale of agricultural commodities or products. Three conditions apply on top of the receipts test. The activities must be conducted by highway or rail. They must be in direct support of the farming operations. They must be conducted within a 150-mile radius of those operations. All four tests must be met. If any one fails, the exception fails.

The receipts figure changed in 2026. The old figure was $500,000. A 2026 amendment (91 FR 49332, August 4, 2026) raised it to $825,000 in 2025 dollars. Guidance written before the amendment still shows $500,000. A farm with $700,000 in gross receipts was outside the exception under the old figure and inside it under the new one. Check the figure on any guidance before relying on it.

The exception covers farming activities only. A farmer who also runs a for-hire trucking operation is excepted for the farming transport and not for the for-hire transport. The 150-mile radius is measured from the farming operations, not from the farmhouse or the county line. The exception also covers only the security plan subpart. Shipping papers, markings, labels and placards still apply to the farming activities.

No other exception exists in the subpart. There is no small carrier exception, no occasional shipper exception and no intrastate exception. A one-truck carrier hauling a cargo tank of gasoline needs a plan exactly as a national fleet does. Size changes the measures in the plan. It does not change whether a plan is required.

What training does a security plan require?

Two levels of security training exist under section 172.704. They apply to different people. Security awareness training under paragraph (a)(4) applies to every hazmat employee. It covers the security risks of hazardous materials transportation and methods to enhance transportation security. It also covers how to recognize and respond to possible security threats. New hazmat employees must receive it within 90 days after employment. It applies whether or not the employer needs a security plan.

In-depth security training under paragraph (a)(5) applies only where a security plan is required. It applies to each hazmat employee of a person required to have a security plan who handles hazardous materials covered by the plan, performs a regulated function related to the covered materials or is responsible for implementing the plan. The training must cover the plan and its implementation: company security objectives; organizational security structure; specific security procedures; specific security duties and responsibilities for each employee; specific actions to be taken by each employee in the event of a security breach.

Recurrent training is due at least once every three years. In-depth security training has an extra trigger: if the security plan is revised during the three-year cycle, the employees must be trained within 90 days of implementation of the revised plan. A plan revision without retraining leaves the training out of date even when the plan itself is current. The Hazmat Training Tracker follows the deadlines for all five training components.

Training records matter as much as the training. Section 172.704(d) requires the hazmat employer to create and retain a record of current training for each hazmat employee, inclusive of the preceding three years, for as long as the employee is employed as a hazmat employee and for 90 days thereafter. The record must include five items: the employee name; the most recent training completion date; a description, copy or location of the training materials; the name and address of the person providing the training; certification that the employee has been trained and tested.

How often must a security plan be reviewed?

At least once a year. Section 172.802(c) requires the security plan, including the transportation security risk assessment, to be reviewed at least annually and revised or updated as necessary to reflect changing circumstances. The review is a duty, not a suggestion. A plan written in 2024 and never reviewed is out of compliance in 2026 even if nothing about the operation changed.

When the plan is updated or revised, all employees responsible for implementing it must be notified. All copies of the plan must be maintained as of the date of the most recent revision. The most recent version, or portions of it, must be available to the employees who are responsible for implementing it, consistent with personnel security clearance or background investigation restrictions and a demonstrated need to know. An old copy in a truck cab is a violation waiting for an inspection.

The plan must be in writing and retained for as long as it remains in effect. A copy, or an electronic file of the plan, must be accessible at or through the principal place of business. The plan must be made available on request, at a reasonable time and location, to an authorized official of the Department of Transportation or the Department of Homeland Security. Keep the review date in the plan itself so the next review is never missed.

How do you use the Hazmat Security Plan Checker?

Pick the materials, enter the quantities, read the verdict. The checker updates with every change, so you can try a smaller packaging or a different material and watch the verdict change.

  1. Pick the first material from the list of 16 trigger categories.
  2. Enter the quantity in the largest single packaging for a bulk material, or the aggregate gross weight for a placard material.
  3. Add a second or third material if the operation handles more than one.
  4. Answer the farmer questions if the operation is a farm.
  5. Read the verdict, the triggers that fired and the list of what the plan must contain.
  6. Use the actions list to write the plan, train the employees and set the annual review date.

Before a load rolls, run the related checks too. The Hazmat Placard Checker answers the placard question for the same load. The PHMSA Registration Checker tests whether the operation needs PHMSA hazmat registration. The Hazmat Safety Permit Checker tests the safety permit triggers. Each duty has its own trigger list. A load can trigger one duty without triggering another.

Frequently asked questions

Does every placarded hazmat load need a security plan?

No. Placarding and security plans are separate duties. A security plan is required only when a material and quantity on the section 172.800(b) list is present. Most placarded loads need no security plan. The pre-2010 rule did require a plan for all placarded quantities, but the 2010 revision replaced that test with the 16 triggers. Class 9 is the clearest example: a placarded Class 9 load never needs a security plan.

What is a large bulk quantity under 49 CFR 172.800?

A large bulk quantity is more than 3,000 kg (6,614 lb) for solids or more than 3,000 L (792 gal) for liquids and gases in a single packaging. The test is strictly greater than the figure: a packaging at exactly 3,000 kg or 3,000 L does not cross the line. The quantity is measured in one packaging, not across the whole vehicle. Two 500 gal totes do not add up to a large bulk quantity.

Does Class 9 hazmat need a security plan?

No. Class 9 miscellaneous hazardous material does not appear anywhere in the trigger list in section 172.800(b). A Class 9 shipment alone never requires a security plan, even when the load is placarded. Lithium batteries, dry ice, asbestos and environmentally hazardous substances are all Class 9. If the same vehicle also carries a listed material in a listed quantity, the plan is required for that material.

What is the farmer exception to the security plan rule?

Section 172.800(c) excepts the transportation activities of a farmer who generates less than $825,000 in 2025 dollars annually in gross receipts from the sale of agricultural commodities or products. The activities must be conducted by highway or rail, in direct support of the farming operations and within a 150-mile radius of those operations. All four tests must be met. The receipts figure was raised from $500,000 by a 2026 amendment (91 FR 49332, August 4, 2026).

What training is required when a security plan is required?

Employees who handle the covered materials, perform a regulated function related to them or are responsible for implementing the plan need in-depth security training under section 172.704(a)(5). The training covers company security objectives, organizational security structure, specific security procedures, specific duties and responsibilities, plus actions to take in the event of a security breach. It is due at least once every three years and within 90 days of implementation of a revised plan. Every hazmat employee also needs security awareness training under section 172.704(a)(4).

How often must a hazmat security plan be reviewed?

At least once a year. Section 172.802(c) requires the plan and its risk assessment to be reviewed at least annually and revised or updated as necessary to reflect changing circumstances. When the plan is revised, all employees responsible for implementing it must be notified and all copies must be maintained as of the date of the most recent revision. The plan must be in writing and retained for as long as it remains in effect.

Related tools

Sources

Follow on WhatsApp Ask by Voice