Skip to main content

Trucking Mind

Five tests. One verdict. This checker tests your vision against the five tests in 49 CFR 391.44(c)(1), plus the road test rule in 391.44(d). Only a certified medical examiner on the National Registry decides whether you qualify.

Answer each question from your eye evaluation. Every answer updates the result as you change each field.

Your vision

Stability and adaptation

Road test and history

Form MCSA-5871

Qualifies under the alternative standard

Better eye 20/40, field 70 degrees: 7 of 8 checks pass

7 checks pass. 0 gaps to fix. 1 item to confirm.

The checks

CheckResultDetail
Worse eyeAppliesThe worse eye does not meet the standard, so the alternative standard in 391.44 applies.
Better-eye acuityPassBetter eye 20/40: meets the 20/40 line, 391.44(c)(1)(i).
Better-eye fieldPassField of 70 degrees in the better eye: meets the 70 degree line, 391.44(c)(1)(i).
Color recognitionPassRecognizes standard red, green and amber, 391.44(c)(1)(ii).
Stable deficiencyPassVision deficiency is stable, 391.44(c)(1)(iii).
Adapted to the changePassEnough time has passed to adapt to and compensate for the change in vision, 391.44(c)(1)(iv).
Road testNeededRoad test required before you drive, 391.44(d)(1). Section 391.33 equivalents do not apply to this first test.
MCSA-5871 timingPassExam must begin by Jan 3, 2027: 45 days after signing, 391.44(c).

The figures

FigureValueNote
Better-eye acuity20/40Meets the 20/40 line, 391.44(c)(1)(i)
Better-eye field70 degreesMeets the 70 degree line, 391.44(c)(1)(i)
Vision checks passed5 of 5Acuity, field, color, stability, adaptation
Road testRequiredRoad test required before driving, 391.44(d)(1).
MCSA-5871 exam deadlineJan 3, 2027Exam must begin within 45 days of signing, 391.44(c).
Medical exam cycleEvery 12 monthsAnnual exam under 391.45(f).

What to do

  • Tell the carrier you need a road test under 391.44(d)(1) before you drive. No 391.33 equivalent applies to this first test.
  • Book the DOT medical exam so it begins within 45 days of the MCSA-5871 signing date, 391.44(c).

Notes

  • Only a certified medical examiner on the National Registry decides whether you qualify. This checker applies the regulation to your answers. It is not a medical decision.
  • The alternative standard is written for interstate commerce, 391.44(a). Intrastate drivers follow the state rule. Most states adopt the federal standard.

This checker applies 49 CFR 391.41(b)(10) and 391.44 to your answers. Confirm the result against the current regulation and your medical examiner before you rely on it.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not medical advice — only a certified medical examiner on the National Registry can decide whether you qualify. Check the current regulation before you rely on a result.

Quick answer: Yes, a driver with vision in one eye can qualify to drive a commercial motor vehicle in interstate commerce. Section 391.44 sets an alternative vision standard for a driver who does not meet the standard test with the worse eye. The better eye needs distant visual acuity of at least 20/40 plus a field of vision of at least 70 degrees in the horizontal meridian. The driver must recognize standard red, green and amber, the deficiency must be stable, plus enough time must have passed to adapt to the change in vision. An ophthalmologist or optometrist records the evaluation on Form MCSA-5871. A certified medical examiner then runs the DOT exam, which must begin within 45 days of the signing date. A first-time qualification also needs a road test, unless one of three exceptions applies. This checker runs all five vision tests plus the road test rule against your answers.

Last reviewed: · Focus keyword: DOT vision requirements one eye

What is the DOT vision standard for truck drivers?

Section 391.41(b)(10)(i) sets the standard vision test. It has four parts. A driver must meet all four. First, distant visual acuity of at least 20/40 (Snellen) in each eye without corrective lenses, or visual acuity separately corrected to 20/40 or better with corrective lenses. Second, distant binocular acuity of at least 20/40 (Snellen) in both eyes with or without corrective lenses. Third, a field of vision of at least 70 degrees in the horizontal meridian in each eye. Fourth, the ability to recognize the colors of traffic signals and devices showing standard red, green and amber.

Correction is allowed at every step. A driver who needs glasses or contacts to reach 20/40 meets the standard while wearing them. The medical examiner then marks the certificate “qualified only if wearing corrective lenses”. The driver must wear them whenever driving. The test measures what the driver can see with the correction in place, not what the driver can see without it.

The standard test is strict about the worse eye. It asks for 20/40 in each eye separately, not just in the better eye. A driver with 20/20 vision in one eye and 20/60 in the other fails the standard test, even though the better eye is excellent. That failure is exactly what the alternative standard in section 391.44 is built for. Paragraph (b)(10)(ii) points a driver who does not satisfy the standard with the worse eye straight to section 391.44.

Part of the standard testWhat it takesSection
Distant acuity, each eyeAt least 20/40, with or without correction391.41(b)(10)(i)
Distant binocular acuityAt least 20/40 in both eyes together391.41(b)(10)(i)
Field of vision, each eyeAt least 70 degrees in the horizontal meridian391.41(b)(10)(i)
Color recognitionStandard red, green and amber391.41(b)(10)(i)

Can you drive a truck with vision in one eye?

Yes. A driver with vision in one eye can hold a medical certificate and drive a commercial motor vehicle in interstate commerce, provided the better eye meets the alternative standard and the rest of the process is followed. The rule covers more than total blindness in one eye. It covers any driver who does not satisfy, with the worse eye, either the distant visual acuity standard with corrective lenses or the field of vision standard, or both. A driver with reduced vision in one eye from injury, disease or surgery is in the same position as a driver with no vision in one eye.

FMCSA defines monocular vision on Form MCSA-5871, the Vision Evaluation Report. Monocular vision means, in the better eye, distant visual acuity of at least 20/40 with or without corrective lenses plus a field of vision of at least 70 degrees in the horizontal meridian, plus the ability to recognize standard red, green and amber, plus a stable vision deficiency. The definition is the standard itself, written as a checklist. If the better eye clears every item, the driver can qualify.

This route is a regulation, not an exemption. Before March 22, 2022, a driver with vision in one eye needed an individual FMCSA vision exemption, applied for case by case under Part 381, with months of waiting. The final rule published January 21, 2022 (87 FR 3417, effective March 22, 2022) replaced that program with the alternative standard. The decision now sits with the certified medical examiner, working from the eye specialist report. No application to FMCSA is needed. No exemption letter is issued.

The alternative standard is not a lower bar for safety. It moves the test from the worse eye to the better eye and adds two judgment tests the standard test never asks: stability and adaptation. A driver whose vision is still changing, or who has not had time to adjust to the loss, does not qualify even with a perfect better eye. The examiner decides both questions from the specialist report plus the exam.

What is the alternative vision standard in 49 CFR 391.44?

Section 391.44 states the rule in one sentence: an individual who does not satisfy, with the worse eye, either the distant visual acuity standard with corrective lenses or the field of vision standard, or both, in section 391.41(b)(10)(i) is physically qualified to operate a commercial motor vehicle in interstate commerce provided the individual meets the other physical qualification standards in section 391.41 and has the vision evaluation plus the medical examination the section requires.

The medical examiner applies five tests in paragraph (c)(1). The driver is not physically qualified if any one of them fails. The better eye must have distant visual acuity of at least 20/40 (Snellen), with or without corrective lenses, plus a field of vision of at least 70 degrees in the horizontal meridian. The driver must be able to recognize the colors of traffic signals and devices showing standard red, green and amber. The vision deficiency must be stable. Sufficient time must have passed since the vision deficiency became stable to allow the individual to adapt to and compensate for the change in vision.

Two points about the first test deserve care. The regulation writes the acuity and field tests in one sentence, joined by the word and. FMCSA treats each as a separate requirement: the MCSA-5871 form defines monocular vision with both tests stated side by side. The specialist records each measurement separately. A better eye at 20/40 with a 60 degree field fails. A better eye at 20/50 with a 90 degree field fails. Both numbers must clear their lines. This checker scores each test on its own.

The process has three steps. First, a licensed ophthalmologist or optometrist evaluates the driver and completes, signs and dates Form MCSA-5871. Second, a certified medical examiner runs the DOT medical exam, which must begin not more than 45 days after the specialist signs the report. Third, for a first-time qualification, the driver completes a road test under section 391.31 before driving, unless one of three exceptions applies. The exam then repeats at least annually under section 391.45(f).

TestWhat it takesSection
Better-eye acuityAt least 20/40 (Snellen), with or without correction391.44(c)(1)(i)
Better-eye fieldAt least 70 degrees in the horizontal meridian391.44(c)(1)(i)
Color recognitionStandard red, green and amber391.44(c)(1)(ii)
StabilityVision deficiency is stable391.44(c)(1)(iii)
AdaptationEnough time passed to adapt to and compensate for the change391.44(c)(1)(iv)

What does the better eye need to see?

Snellen acuity is a fraction. The top number is the test distance in feet, 20. The bottom number is the distance at which a person with normal vision can read the same line. A result of 20/40 means the driver reads at 20 feet what a person with normal vision reads at 40 feet. Smaller bottom numbers mean sharper vision: 20/20 is normal, 20/25 and 20/30 are better than the line, 20/50 and 20/60 are worse. The alternative standard draws its line at 20/40 in the better eye, measured with or without corrective lenses.

The field of vision test measures peripheral vision: how far to the side the driver can detect movement while looking straight ahead. The standard needs at least 70 degrees in the horizontal meridian in the better eye. Seventy degrees is the total sweep across the horizontal line. It is the same number the standard test asks of each eye. A driver who meets 20/40 but has tunnel vision below 70 degrees does not qualify.

The field measurement is not a finger-counting test at the DOT exam. Form MCSA-5871 requires formal perimetry, using a testing method that tests to at least 120 degrees, with a copy of the formal perimetry test attached for each eye. The specialist interprets the results in degrees of field of vision. A driver who arrives at the eye evaluation without a perimetry result will be sent for one, so it pays to confirm the specialist runs formal perimetry before booking the appointment.

Correction counts for both tests. Glasses or contacts that bring the better eye to 20/40 satisfy the acuity test. The certificate will carry the corrective lens notation. The field test is measured with the correction the driver normally wears. What does not count is any device that magnifies or redirects the image: monovision contact lenses and telescopic lenses are not acceptable for commercial driving under FMCSA Medical Examiner Handbook guidance.

What does a stable vision deficiency mean?

Stability means the deficiency is not getting worse. The regulation does not define stability with a number of months or a test result. It leaves the question to the ophthalmologist or optometrist who evaluates the driver, then to the medical examiner who applies independent medical judgment to the specialist report. A deficiency caused by an old injury that has healed is stable. A deficiency caused by a progressive disease that is still advancing is not.

Adaptation is the second judgment test. It is separate from stability. Even after a deficiency stops changing, the driver needs time to adjust to the new way of seeing: judging distance with one eye, scanning more actively for traffic on the blind side, plus compensating for the lost field. The regulation asks whether sufficient time has passed since the deficiency became stable to allow the individual to adapt to and compensate for the change in vision. There is no fixed waiting period in the rule. A driver who lost vision in one eye last month has probably not adapted. A driver who has lived with the same loss for years almost certainly has.

Both tests turn on the specialist report. Form MCSA-5871 asks the ophthalmologist or optometrist to state whether the vision is stable and whether enough time has passed to adapt. The examiner then weighs that opinion against the exam findings. A driver who is unsure about either question should raise it at the eye evaluation, not at the DOT exam, because the specialist is the one who documents it.

A failed stability or adaptation test is not a permanent bar. It is a timing problem. The driver waits until the condition stabilizes and adaptation is established, then gets a fresh MCSA-5871 and a fresh exam. The checker treats both as fails with exactly that advice: wait, then re-evaluate.

What is Form MCSA-5871 and who completes it?

Form MCSA-5871 is the Vision Evaluation Report. It is the document that carries the eye specialist findings to the medical examiner. Only a licensed ophthalmologist or optometrist may complete it. The specialist must sign and date the report and provide a full name, office address and telephone number on it. The current revision is dated March 26, 2025, under OMB control number 2126-0006, with an expiration date of March 31, 2028.

The form records the measurements behind the five tests. It asks for distant visual acuity in each eye, corrected and uncorrected. It asks for the field of vision in each eye, with formal perimetry results attached. It asks whether the individual can recognize standard red, green and amber traffic signal colors. It asks about the medical history behind the deficiency, including any progressive eye condition, its diagnosis date, its severity and its current treatment. It asks the specialist to state whether the vision is stable, whether enough time has passed to adapt, plus whether more frequent evaluations are required.

The clock starts at signing. Section 391.44(c) requires the medical examination to begin not more than 45 days after the ophthalmologist or optometrist signs and dates the report. The form itself states the same limit in calendar days. A report signed 46 days before the exam is too old. The driver needs a fresh evaluation. The practical lesson is to book the DOT exam first, then book the eye evaluation close enough to it that the 45 day window is comfortable. This checker computes the deadline from the signing date you enter.

The report becomes part of the exam record. Section 391.44(c)(1) requires the medical examiner to receive a completed MCSA-5871 for each required examination. It states that the report shall be treated and retained as part of the Medical Examination Report Form, MCSA-5875. The driver needs a fresh MCSA-5871 for every annual exam under the alternative standard, not just the first one.

Do you need a road test under the alternative vision standard?

Yes, the first time, unless an exception applies. Section 391.44(d)(1) states that an individual physically qualified under this section for the first time shall not drive a commercial motor vehicle until the individual has successfully completed a road test subsequent to physical qualification and has been issued a certificate of driver road test in accordance with section 391.31. The driver must tell the motor carrier responsible for the road test that a road test is required. The carrier must conduct the road test in accordance with section 391.31(b) through (g).

The first road test has a special rule. Section 391.44(d)(2) states that the provisions of section 391.33 for the equivalent of a road test do not apply to it. A valid CDL does not count as the equivalent for this test. A road test certificate from another carrier does not count either. The driver must take the actual road test. Once the driver passes it and is issued the certificate, the section adds that any otherwise applicable provisions of section 391.33 will apply thereafter. From then on, a later carrier may accept the CDL or a certificate from within the preceding 3 years, exactly as for any other driver.

Three exceptions excuse the first road test. Paragraph (d)(3) covers a driver who operated a commercial motor vehicle with the vision deficiency for the 3 year period immediately preceding the date of first qualification, in intrastate commerce or in interstate commerce excepted from the qualification rules. Paragraph (d)(4) covers a driver who held a valid FMCSA vision exemption on March 22, 2022. Paragraph (d)(5) covers a driver who was medically certified on March 22, 2022 under former section 391.64(b) for the vision waiver study program. Drivers under (d)(4) and (d)(5) do not need to tell the carrier they are excepted. The (d)(3) exception needs paperwork, described below.

The road test itself covers eight operations under section 391.31(c): the pretrip inspection required by section 392.7, coupling and uncoupling of combination units where applicable, placing the vehicle in operation, use of the controls and emergency equipment, operating in traffic and while passing other vehicles, turning, braking plus slowing by means other than braking, plus backing and parking. The examiner rates each operation on a form the carrier provides, signs the form, then completes a certificate of road test if the driver passes. For the full road test and equivalent rules, run the Road Test and Equivalent Checker.

Road test exceptionWho it coversSection
3 year driving historyOperated a CMV with the deficiency for 3 years before first qualification, intrastate or excepted interstate391.44(d)(3)
Vision exemption on Mar 22, 2022Held a valid FMCSA vision exemption on that date391.44(d)(4)
Waiver study certificationMedically certified on Mar 22, 2022 under former 391.64(b)391.44(d)(5)
Already passedPassed the first 391.44 road test already; 391.33 applies thereafter391.44(d)(2)

The (d)(3) exception carries its own paperwork. The driver must certify in writing to the carrier the date the vision deficiency began. If the carrier determines the driver held a valid license and operated a commercial motor vehicle with the deficiency for the 3 year period, the carrier must prepare a written statement to that effect, give the individual a copy, plus retain the original statement plus the original or a copy of the driver certification in the driver qualification file. A driver claiming this exception should gather license records and employment records for the 3 years before raising it with the carrier.

What happens at the DOT medical exam?

The certified medical examiner runs the full DOT physical and applies independent medical judgment to the MCSA-5871. The examiner must receive a completed Vision Evaluation Report for each required examination, must consider the information in it, plus must determine whether the individual meets the physical qualification standards in section 391.41. The eye specialist supplies findings. The examiner makes the decision. A strong specialist report does not guarantee certification. A borderline report does not guarantee denial.

The exam repeats every year. Section 391.45(f) requires a driver certified under section 391.44 to be examined and certified again if the most recent exam did not occur during the preceding 12 months. In practice the medical certificate runs for a maximum of 12 months, against the 24 month default for most drivers. Each annual exam needs a fresh MCSA-5871, signed within 45 days of the exam. A driver who lets the certificate lapse may not drive until a new exam is complete. Use the Medical Card Expiry Tracker to watch the annual date.

Vision is one of thirteen physical standards. Section 391.44(a)(1) requires the driver to meet the other physical qualification standards in section 391.41 as well. Blood pressure, hearing, diabetes, heart conditions, respiratory conditions, epilepsy history and drug use are all tested at the same exam. Blood pressure sets its own certificate length: Stage 1 readings earn up to 1 year, Stage 2 earns a one-time 3 month certificate, Stage 3 earns no certificate until the pressure comes down. Check blood pressure before the exam with the Blood Pressure Tracker. For a full self-assessment against all thirteen standards, run the DOT Physical Readiness Checker before the exam.

Two more conditions share the annual cycle. Insulin-treated diabetes mellitus also needs an annual exam under section 391.45(e), with its own assessment form, MCSA-5870, from the treating clinician. There is no A1C threshold in the diabetes rule, section 391.46. Drivers with both vision and diabetes questions should check the Insulin-Treated Diabetes Checker as well. A driver who qualifies under the alternative vision standard and needs glasses to reach 20/40 will carry the corrective lens notation on the certificate. The driver must wear the correction whenever driving.

Can you wear glasses or contacts to pass the vision test?

Yes. Both the standard test and the alternative standard measure acuity with or without corrective lenses. A driver who reaches 20/40 in the better eye wearing glasses or contacts meets the acuity test. The certificate records the corrective lens requirement. The driver must wear the correction whenever driving a commercial motor vehicle. Bring the glasses or contacts to every exam, including the eye evaluation, so the measurements match real driving conditions.

Two kinds of correction are not acceptable. Monovision contact lenses, where one lens corrects distance vision and the other corrects near vision, are not acceptable for commercial driving. The setup leaves one eye unable to meet the distance standard. It compromises depth perception. Telescopic lenses, including bioptic telescopic lenses, are not acceptable either. The FMCSA Medical Examiner Handbook states both points as guidance for examiners. A driver using either setup should discuss ordinary glasses or standard contacts with the eye specialist before the evaluation.

Contact lens wearers should confirm they tolerate the lenses well for long driving days. The examiner may ask about comfort, dryness and wearing time. A driver who cannot wear contacts for a full shift is better served by glasses, because the correction must be worn for the whole duty period, not just for the test. Keep a spare pair of glasses in the truck: a broken lens on the road is a lost day if no spare is at hand.

Does the old FMCSA vision exemption still work?

No. The federal vision exemption program ended on March 22, 2022, when the alternative vision standard took effect. FMCSA stopped processing new vision exemption requests. The alternative standard became the only route for a driver who does not meet the vision standard in the worse eye. Drivers who held an exemption were given one year after the effective date to comply with the new standard. Certificates issued with a vision exemption became void on March 22, 2023.

Two groups keep a benefit from the old program. Both appear in the road test exceptions. A driver who held a valid FMCSA vision exemption on March 22, 2022 does not need the first road test under paragraph (d)(4). A driver who was medically certified on March 22, 2022 under former section 391.64(b) for the vision waiver study program does not need it under paragraph (d)(5). Neither group needs to tell the carrier about the exception. Both still need the annual MCSA-5871 and the annual exam like any other alternative-standard driver.

Section 391.64 itself is now marked [Reserved] in the regulations. It was removed effective March 23, 2026 (91 FR 7864). The removal does not touch the (d)(5) exception, which turns on the medical certification held on March 22, 2022, not on the current text of section 391.64. A driver in the waiver study group should keep the March 22, 2022 certification records, since they are the proof of the exception.

Older guides still describe the exemption application process: three years of driving history, an eye report within the last three months, a phone number for the exemption office. That process is gone. Any guide that tells a driver to apply to FMCSA for a vision exemption is out of date. The current route runs through the eye specialist, the MCSA-5871 and the certified medical examiner.

What if your vision fails even the alternative standard?

A driver who cannot meet the alternative standard is not physically qualified to operate a commercial motor vehicle in interstate commerce. The examiner may not certify the driver. A carrier may not put the driver behind the wheel. Driving without a valid medical certification risks an out-of-service order at a roadside inspection, a disqualification record, plus civil penalties for the carrier. The correct move is to stop and work the options below, not to drive and hope.

First, check whether the failure is fixable. A better eye at 20/50 may reach 20/40 with a new glasses prescription. A cataract may be operable, with vision restored after surgery and recovery. A field loss caused by an untreated condition may improve with treatment. The eye specialist is the right person to ask. The MCSA-5871 evaluation is the right place to ask it. A re-evaluation after treatment starts the process again with fresh measurements.

Second, consider the Part 381 exemption route. FMCSA may grant an exemption from a physical qualification standard case by case under Part 381, where the driver shows an equivalent level of safety. The process is slow and the bar is high: it is the same route a driver with epilepsy history or another disqualifying condition would take. The Medical Variance and Exemption Navigator maps which route fits which condition, including the Skill Performance Evaluation certificate for limb impairment and the Part 381 exemption for other conditions.

Third, check the rest of the qualification picture. Vision is one gate among several. A driver sorting out a vision problem should also confirm age, English, license, disqualification status and road test standing, so no second gap appears once the vision question is settled. The Driver Qualification Self-Check runs all eight checks in one pass.

How do you use the Vision Alternative-Standard Checker?

Work through the questions in order. The checker updates with every change, so you can fix an answer and watch the verdict change.

  1. Answer whether the worse eye fails the standard vision test.
  2. Enter the better-eye acuity and field of vision from the eye evaluation.
  3. Answer the color, stability and adaptation questions.
  4. Answer the road test question, plus the exception questions if this is a first qualification.
  5. Enter the date Form MCSA-5871 was signed, or leave it blank.
  6. Read the verdict, the check table, the figures and the actions.

Before you book the DOT exam, run the DOT Physical Readiness Checker as well. Vision is one of thirteen physical standards. The readiness checker tests the other twelve before the exam finds them.

Frequently asked questions

Can I drive a truck with one eye?

Yes, if the better eye meets the alternative vision standard in 49 CFR 391.44. The better eye needs distant visual acuity of at least 20/40 plus a field of vision of at least 70 degrees in the horizontal meridian. The driver must recognize standard red, green and amber, the deficiency must be stable, plus enough time must have passed to adapt to the change in vision. An ophthalmologist or optometrist records the evaluation on Form MCSA-5871. A certified medical examiner runs the DOT exam within 45 days of signing. A first-time qualification also needs a road test unless an exception applies.

What is 20/40 vision in the better eye?

Snellen acuity of 20/40 means the driver reads at 20 feet what a person with normal vision reads at 40 feet. It is the minimum distant visual acuity the alternative standard allows in the better eye, measured with or without corrective lenses. A result of 20/20, 20/25 or 20/30 is better than the line. A result of 20/50 or worse fails the test. Glasses or contacts that bring the better eye to 20/40 satisfy the test. The certificate will note the corrective lens requirement.

How long is Form MCSA-5871 good for?

The DOT medical exam must begin not more than 45 days after the ophthalmologist or optometrist signs and dates Form MCSA-5871. A report signed 46 days before the exam is too old. The driver needs a fresh evaluation. Book the DOT exam first, then book the eye evaluation close enough to it that the 45 day window is comfortable. A fresh MCSA-5871 is needed for every annual exam under the alternative standard.

Do I need a road test if I qualify under the vision alternative standard?

Yes, the first time, unless an exception applies. Section 391.44(d)(1) requires a road test under 391.31 before a first-time driver operates a commercial motor vehicle. Section 391.33 equivalents do not apply to that first test. Three exceptions excuse it: 3 years of intrastate or excepted interstate driving with the deficiency, a valid FMCSA vision exemption held on March 22, 2022, or medical certification on March 22, 2022 under former 391.64(b). Once the first road test is passed, 391.33 equivalents apply thereafter.

How often do I need a DOT physical under the alternative vision standard?

Every 12 months. Section 391.45(f) requires a driver certified under 391.44 to be examined and certified again if the most recent exam did not occur during the preceding 12 months. The medical certificate runs for a maximum of 12 months, against the 24 month default for most drivers. Each annual exam needs a fresh Form MCSA-5871, signed within 45 days of the exam.

Can I wear monovision contact lenses to pass the DOT vision test?

No. Monovision contact lenses, where one lens corrects distance vision and the other corrects near vision, are not acceptable for commercial driving. The setup leaves one eye unable to meet the distance standard. It compromises depth perception. Telescopic lenses, including bioptic telescopic lenses, are not acceptable either. Both points come from FMCSA Medical Examiner Handbook guidance. Ordinary glasses or standard contacts that bring the better eye to 20/40 are the accepted correction.

Related tools

Sources

Follow on WhatsApp Ask by Voice