Skip to main content

Trucking Mind

The confirmation result decides. A screening number, a roadside reading, or a guess about what the result might have been does not trigger Part 382 consequences. Enter the confirmation result from the alcohol test form when you have it. If you only have a screening result so far, pick screening test below and the tool will tell you what must happen next.

Enter the result, say what kind of test produced it, plus the timing. Every answer updates the result as you change each field.

The test result

Enter the number exactly as printed, for example 0.04 or 0.023. The cutoffs are 0.02 and 0.04.

Timing

Use the time the confirmation test was administered. The 24-hour removal clock runs from the test.

The start of the next regularly scheduled duty period. For a 0.02 to 0.039 result, the driver returns at the later of this time and 24 hours after the test.

The Clearinghouse report clock runs in business days from this date. Weekends plus federal holidays do not count.

VIOLATION: alcohol concentration 0.04 or higher

This result is a Part 382 violation. The driver is removed from safety-sensitive functions at once.

Section 382.201 bars a driver from safety-sensitive functions at an alcohol concentration of 0.04 or higher. Section 382.501 requires immediate removal. The driver cannot return until the return-to-duty process in Part 40 Subpart O is complete: a substance abuse professional evaluation, any education or treatment the SAP prescribes, plus a return-to-duty alcohol test below 0.02.

The checks

CheckResultDetail
Result bandViolation0.04 or higher under section 382.201
Safety-sensitive functionsRemoved at onceSection 382.501; removal starts when the employer learns of the result
SAP evaluationRequiredPart 40 Subpart O; no return without it
Clearinghouse reportDue by Tue, Nov 24, 2026Employer reports by the close of the third business day, section 382.705(b)(1)
Return-to-duty testBelow 0.02 requiredSection 40.305(a); the test follows SAP clearance
Record retention5 years minimumAlcohol results of 0.02 or higher, section 382.401(b)(1)(i)
CDL statusDowngrade riskFMCSA notifies the state; the state downgrades the CDL while the driver is prohibited

The deadlines

DeadlineWhenNote
Earliest return to safety-sensitive functionsAfter the SAP process completesNo fixed date: SAP evaluation, treatment, plus a return-to-duty test below 0.02
Clearinghouse report dueTue, Nov 24, 2026 by close of businessThird business day after the employer learned of the result, section 382.705(b)(1)
Return-to-duty test barBelow 0.02Section 40.305(a)
Follow-up testing minimum6 unannounced tests in 12 monthsSection 40.307(d); the SAP may extend to 60 months
Record kept untilWed, Nov 19, 20315 years from the test date, section 382.401(b)(1)(i)
Clearinghouse record clears5 years after the violation, at the earliestAll four conditions in section 382.719(a) must be met, including completed follow-up testing

What to do

  • Stop all safety-sensitive work at once. Do not drive, load, inspect, or repair a commercial motor vehicle.
  • Contact a substance abuse professional (SAP) and book the evaluation. The employer must give you a list of qualified SAPs.
  • Complete the education or treatment the SAP prescribes, then return for the follow-up SAP evaluation.
  • Take the return-to-duty alcohol test only after the SAP clears you. It must read below 0.02.
  • Expect at least 6 unannounced follow-up tests in the first 12 months back on duty.
  • Check your Clearinghouse record and keep your contact details current so FMCSA notices reach you.

Documentation checklist

  • Alcohol test form with the confirmation result and times
  • Clearinghouse report confirmation with the report date
  • SAP referral list given to the driver, with the date
  • SAP evaluation report and follow-up evaluation report
  • Return-to-duty test result below 0.02
  • Follow-up testing plan and test records

Notes

  • A test result is not a conviction. The CDL disqualification table in section 383.51 applies to convictions, including a conviction for operating a CMV at 0.04 or higher, which carries a 1-year disqualification on a first offense.
  • The violation stays available to querying employers until all four conditions in section 382.719(a) are met, including 5 years since the violation and a completed follow-up plan.
  • Section 392.5 is a separate roadside rule: any measured alcohol concentration while on duty can bring a 24-hour out-of-service order.

This tool applies 49 CFR 382.201, 382.505, 382.307, 382.401, 382.501, 382.503, 382.705, 392.5, plus Part 40 Subpart O to your inputs. Confirm the result against your company drug and alcohol policy plus your service agent before acting. The regulation text controls if anything here differs from it.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice — verify the result against the current regulation text or a qualified professional before acting on a test result.

Quick answer: A DOT alcohol test result falls into one of three bands. At 0.04 or higher, the result is a Part 382 violation: the driver is removed from safety-sensitive functions at once, the employer reports it to the Clearinghouse, plus the driver must complete the substance abuse professional process before returning. From 0.02 to 0.039, the result is not a violation, but the driver is removed until the start of the next regularly scheduled duty period, for not less than 24 hours after the test. Below 0.02, the result carries no consequence under Part 382. Only a confirmation test result decides which band applies.

Last reviewed: · Focus keyword: failed DOT alcohol test 0.04

What does a DOT alcohol test result mean?

A DOT alcohol test measures alcohol concentration: the alcohol in a volume of breath, expressed in grams of alcohol per 210 liters of breath, as shown by an evidential breath test. The number on the alcohol test form decides what happens next. Federal rules sort every result into one of three bands. The bands turn on two cutoffs, 0.02 and 0.04. The gap between them matters as much as the cutoffs themselves.

Confirmation resultWhat it isWhat happens
0.04 or higherA Part 382 violationImmediate removal, Clearinghouse report, plus the full return-to-duty process with a substance abuse professional
0.02 to 0.039Removal, not a violationRemoved from safety-sensitive functions until the next scheduled duty period, not less than 24 hours after the test
Below 0.02No actionNo removal, no report, no return-to-duty process; the record is kept 1 year

Three points keep drivers and employers out of trouble. First, only a confirmation test result decides the band. A screening result of 0.02 or higher only starts the confirmation process; it never by itself creates a violation or a removal. Second, the bands apply to DOT tests conducted under Part 382. A roadside breath reading is not a DOT test result. It follows different rules under section 392.5. Third, the result is a test outcome, not a criminal conviction. A failed DOT alcohol test and a DUI conviction are two different events with two different sets of consequences. Confusing them is one of the most common mistakes in this area.

The checker above reads a result the same way the regulation does. Enter the confirmation number, say what kind of test produced it, plus the timing. It returns the band, the checks, the deadlines, plus the next steps for the driver or the employer.

What happens after a failed DOT alcohol test at 0.04 or higher?

A confirmation result of 0.04 or higher is a violation of section 382.201, which bars any driver from reporting for duty or remaining on duty requiring safety-sensitive functions at that concentration. The consequences start immediately and run in a fixed order.

First, the driver comes off safety-sensitive work at once. Section 382.501 bars a driver who has engaged in conduct prohibited by subpart B from performing safety-sensitive functions. It bars the employer from permitting it. Removal starts when the employer learns of the result. The employer must not wait for the written test report to arrive before pulling the driver.

Second, the employer reports the violation to the FMCSA Drug and Alcohol Clearinghouse. Section 382.705(b)(1) requires the report by the close of the third business day after the employer obtained the information. Business days exclude weekends plus federal holidays. The day the employer learned of the result is day zero, never counted. Learn of a violation on a Monday and the report is due by the close of Thursday. The checker above counts the deadline for the date you enter, with federal holidays through 2027 built in. The Clearinghouse Query Tracker covers the full set of Clearinghouse clocks, including the query rules that apply when the driver later seeks work with a new employer.

Third, the driver enters prohibited status in the Clearinghouse and cannot perform safety-sensitive functions for any employer until the return-to-duty process is complete. Since November 18, 2024, the state licensing agency must also downgrade the commercial driving privilege of a driver in prohibited status. The Clearinghouse Downgrade Checker explains how the downgrade works and what restores the privilege.

Fourth, the driver completes the return-to-duty process in Part 40 Subpart O: an evaluation by a substance abuse professional, any education or treatment the SAP prescribes, a follow-up SAP evaluation, plus a return-to-duty alcohol test below 0.02. Only then can the driver resume safety-sensitive functions, only then under a follow-up testing plan of at least six unannounced tests in the first 12 months. The process has no fixed length. It takes as long as the SAP process takes, which is why a failed DOT alcohol test at 0.04 can keep a driver off the road for weeks or months even when everything goes smoothly.

One more consequence is easy to miss. Section 382.503 is titled “Required evaluation and testing, reinstatement of commercial driving privilege,” and its second paragraph bars a driver whose commercial driving privilege has been removed from driving a commercial motor vehicle until the state licensing agency reinstates the privilege. Clearing the SAP process and clearing the license are two separate steps. Both must be done before the driver returns to the road.

What does a 0.02 to 0.039 DOT alcohol result mean?

A confirmation result from 0.02 to 0.039 sits in the middle band. It is the band drivers misunderstand most often. It is not a violation. Section 382.505(a) states the rule: a driver tested under subpart C who is found to have an alcohol concentration of 0.02 or greater but less than 0.04 must not perform or continue to perform safety-sensitive functions, including driving a commercial motor vehicle, until the start of the next regularly scheduled duty period, but not less than 24 hours following administration of the test. The employer is barred from permitting it on the same terms.

The removal ends at the later of two times: the start of the next regularly scheduled duty period, or 24 hours after the test. An example shows why the later-of rule matters. A driver tests at 0.03 at 9:00 AM on Thursday. The next scheduled shift starts at 8:00 AM on Friday. The 24-hour mark is 9:00 AM on Friday, which is later than the shift start, so the driver returns at 9:00 AM on Friday, one hour into the shift. If the next shift started at noon on Friday instead, the driver would return at noon, because the shift start is the later time. The checker above computes the exact return time from the test time plus the next duty period you enter.

Three things do not follow from a 0.02 to 0.039 result. There is no SAP process, because there is no violation to return from. There is no Clearinghouse report, because section 382.705(b)(1)(i) covers only alcohol confirmation results of 0.04 or higher. There is no CDL downgrade, because the driver never enters prohibited status. A driver who hears otherwise is hearing a company policy, not a federal rule.

One thing does follow. It surprises employers: the record is kept for 5 years. Section 382.401(b)(1)(i) puts alcohol test results of 0.02 or greater in the 5-year tier. It draws no line between a violation result and a removal result. A 0.03 result stays in the file as long as a 0.08 result. Only results below 0.02 drop to the 1-year tier.

What does an alcohol result below 0.02 mean?

A confirmation result below 0.02 means nothing further happens under Part 382. Section 40.255(a)(2) says it plainly: if the alcohol confirmation test result is lower than 0.02, nothing further is required of the employee. The driver continues safety-sensitive functions, the employer files the result, plus the matter is closed.

The same cutoff governs the screening stage. A screening result below 0.02 ends the test on the spot. The breath alcohol technician signs the alcohol test form and sends the result to the designated employer representative. No confirmation test is needed, because there is nothing to confirm.

The cutoff also sets the bar for returning after a violation. A return-to-duty alcohol test must read below 0.02, not merely below 0.04. A driver who blows 0.03 on a return-to-duty test has not committed a new violation, but the driver has not passed the return-to-duty test either. The driver stays out of safety-sensitive functions until a test below 0.02 is recorded. The checker above treats a return-to-duty result of 0.02 to 0.039 as a failed return, not as a new violation, which matches how the regulation treats it.

Employers should note the record rule for this band too. Section 382.401(b)(3) keeps alcohol test results below 0.02 for a minimum of 1 year. That is the shortest retention tier in the drug and alcohol program. It is the only tier that applies to a result in this band.

How does the return-to-duty process work after an alcohol violation?

The return-to-duty process is set out in Part 40 Subpart O. Section 382.503 makes it mandatory: no driver who has engaged in conduct prohibited by subpart B may perform safety-sensitive functions until the driver has met the requirements of Part 40 Subpart O. The steps run in order. Skipping a step does not work. A clean test taken without a SAP evaluation does not clear a violation. FMCSA guidance on section 382.503 answers that exact question with a no: the employer must have a SAP report showing the driver was evaluated, plus a return-to-duty test that meets the rules.

Step one is the SAP evaluation. The driver meets a qualified substance abuse professional, who is an independent evaluator, not an employee of the carrier. The SAP assesses the driver and prescribes education, treatment, or both. The employer must give the driver a list of qualified SAPs. The employer is not required to pay for the evaluation or the treatment. The driver usually bears the cost.

Step two is completing whatever the SAP prescribed. The SAP decides the program. The SAP alone decides whether the driver complied with it. A driver who starts a program and stops has not completed the process. The SAP will say so in the follow-up evaluation.

Step three is the follow-up SAP evaluation. The driver returns to the same SAP, who checks compliance and decides whether the driver is ready for a return-to-duty test. If the SAP is satisfied, the SAP sends a written report to the designated employer representative stating that the driver is eligible for return-to-duty testing. The SAP also sets the follow-up testing plan at this stage.

Step four is the return-to-duty alcohol test. It can only happen after the SAP clears the driver. It must read below 0.02. A result of 0.02 or higher does not satisfy the requirement. A result of 0.04 or higher on a return-to-duty test is a new DOT violation under section 40.285. The driver starts the SAP process again from the beginning.

Step five is follow-up testing. The SAP plan requires at least six unannounced tests in the first 12 months of safety-sensitive duty after the return. The SAP may extend testing for up to 48 more months, for a total window of 60 months. The tests are unannounced, the employer picks the dates, plus the plan follows the driver to a new employer if the driver changes jobs. A verified positive drug result or an alcohol result of 0.04 or higher on a follow-up test is a new violation, with a new SAP process and a new Clearinghouse report. The DOT Drug Test Rights Checker covers the rights a driver holds through testing and the return-to-duty process, including split specimen rights on the drug side.

Two cautions belong here. First, completing the process does not force any employer to rehire the driver. Section 40.305(b) leaves the return decision to the employer. A driver who completes the SAP process is eligible to drive again, not entitled to the old job. Second, the violation stays visible to querying employers until all four conditions in section 382.719(a) are met, which takes at least five years from the violation determination plus a completed follow-up plan. Returning to duty and clearing the record are different milestones, years apart.

How long does a failed DOT alcohol test stay on the Clearinghouse record?

A failed DOT alcohol test at 0.04 or higher stays available to employers running Clearinghouse queries until all four conditions in section 382.719(a) are satisfied. The rule is often shortened to five years. The shortening misleads drivers. Five years is one condition of four, not the whole rule.

  1. The SAP reports the return-to-duty information required by section 382.705(d), including the date the driver became eligible for return-to-duty testing.
  2. An employer reports a negative return-to-duty test result.
  3. The current employer reports that the driver completed all follow-up tests in the SAP plan.
  4. Five years have passed since the date of the violation determination.

Until every one of these is true, the violation remains available to employers who query, per section 382.719(b). A driver who never starts the SAP process stays visible indefinitely. Time alone clears nothing. A driver who completes return to duty but never finishes the follow-up plan also stays visible, because the third condition is unmet. The FMCSA driver brochure states the same rule as five years from the violation determination or until the follow-up plan is complete, whichever is later.

Prohibited status ends sooner than record availability. A driver leaves prohibited status once a negative return-to-duty test is reported, which is the second condition above. From that point the driver may work, even though the violation still shows to querying employers. That gap explains why a driver can hold a valid CDL, drive legally, plus still face questions from every prospective employer for years: the record outlives the prohibition by design.

The scale of the record is large. As of October 1, 2026, 218,977 drivers held prohibited status in the Clearinghouse. A failed DOT alcohol test is not a rare event. Employers query the Clearinghouse before hiring precisely because the record is the only reliable way to see it.

What is the difference between a screening test and a confirmation test?

DOT alcohol testing runs in two stages. The stages have different jobs. The screening test is a quick first pass. The confirmation test is the evidential test that produces the result Part 382 acts on. Confusing the two stages is how drivers end up believing a screening number is a violation when it is not, or believing a low screening number ends the matter when a confirmation test is still owed.

The screening test comes first. A breath alcohol technician or screening test technician administers it with an approved screening device, which may be an evidential breath testing device or an alcohol screening device such as a saliva tester. If the screening result is below 0.02, the test is over. The technician signs the alcohol test form and sends the result to the designated employer representative. Nothing further is required.

If the screening result is 0.02 or higher, section 40.247(b) requires a confirmation test. The confirmation test uses an evidential breath testing device. It cannot start until at least 15 minutes have passed since the screening test ended. Section 40.251(a)(1) says the technician should begin the confirmation test as soon as possible after the wait, but not more than 30 minutes after the screening test. During the wait, the driver must be observed. The driver is told not to eat, drink, put anything in the mouth, or belch. The wait exists to clear mouth alcohol, which can inflate a reading for a few minutes after drinking, using mouthwash, or taking some medicines.

The timing rules have teeth. A confirmation test started before the 15-minute wait ends is a fatal flaw under section 40.267. The test must be canceled. A confirmation test started after 30 minutes still goes ahead, but the delay may itself be a regulatory violation. The checker above shows the 15-minute to 30-minute window from the screening time you enter, so a supervisor can see at a glance whether the confirmation test is still inside it.

After the confirmation test, section 40.255 governs what happens next. A confirmation result below 0.02 means nothing further is required of the employee. A confirmation result of 0.02 or higher means the employee signs the alcohol test form, plus the breath alcohol technician notifies the designated employer representative immediately and directly. From that point the three bands apply: below 0.02 means no action, 0.02 to 0.039 means removal, 0.04 or higher means a violation. The screening number no longer matters. Only the confirmation number counts.

What are the DOT alcohol rules before duty and after an accident?

The test-result bands are only part of the alcohol rules. Part 382 also bans alcohol use around duty. Part 392 adds a separate roadside rule with its own penalties. A driver can violate these conduct rules without ever taking a test. A test result can look clean while the conduct rules were still broken.

Before duty, the rule is four hours. Section 382.207 bars a driver from performing safety-sensitive functions within four hours after using alcohol. It bars an employer with actual knowledge of the use from permitting it. Section 392.5(a)(1) states the same four-hour rule for going on duty, operating a commercial motor vehicle, or having physical control of one. Four hours is a prohibition window, not a sobriety guarantee: a driver who waited four hours but still tests at 0.04 has still violated section 382.201.

On duty, the rule is zero use. Section 382.205 bars a driver from using alcohol while performing safety-sensitive functions. Section 392.5(a)(2) goes further for the roadside: no driver may use alcohol, be under the influence of alcohol, or have any measured alcohol concentration or detected presence of alcohol while on duty, operating a commercial motor vehicle, or in physical control of one. Note the wording. Section 392.5 sets no 0.02 floor. Any measured concentration counts. Section 392.5(a)(3) also bars possessing beer, wine, or distilled spirits while on duty or operating a commercial motor vehicle, with narrow exceptions for manifested cargo plus bus passengers.

After an accident, the rule is eight hours. Section 382.209 bars a driver who is required to take a post-accident alcohol test from using alcohol for eight hours following the accident, or until the post-accident alcohol test is done, whichever occurs first. The rule protects the test: alcohol consumed after a crash would make the result meaningless. The post-accident test itself must be attempted as soon as practicable, with a written record of the reasons if the alcohol test is not done within 2 hours, plus attempts ceasing after 8 hours. The Post-Accident Testing Decision Tool works out whether a crash triggers testing and runs the 2-hour, 8-hour, plus 32-hour clocks.

Reasonable suspicion testing has its own alcohol clocks. A trained supervisor who observes signs of alcohol misuse must order a test. Section 382.307(e)(1) sets the same 2-hour record rule plus 8-hour cease rule. Section 382.307(e)(2) keeps the driver out of safety-sensitive functions until an alcohol test below 0.02 or 24 hours have elapsed following the determination. Section 382.307(e)(3) bars Part 382 action based solely on behavior and appearance for alcohol, absent an alcohol test. The Reasonable Suspicion Testing Checker tests whether a determination is justified and runs those clocks.

At the roadside, section 392.5(c) places any driver found in violation of the alcohol prohibitions out of service immediately for 24 hours, starting when the out-of-service order is issued. The 24-hour roadside order is a separate track from the Part 382 bands: a driver can be placed out of service at the roadside and still face Part 382 consequences from a later DOT test, or be placed out of service with no DOT test at all. The HOS Out-of-Service Return Calculator covers the separate hours-of-service return clock, which runs on different rules from the alcohol clocks.

Can an employer act on a 0.02 to 0.039 result?

Yes, under company policy, but not under Part 382. Section 382.505(b) draws the line in both directions: except as provided in the removal rule, no employer shall take any action under this part against a driver based solely on test results showing an alcohol concentration less than 0.04. That bar does not prohibit an employer with authority independent of this part from taking any action otherwise consistent with law.

In practice, the distinction decides what an employer may do after a 0.03 result. The employer may not treat the result as a Part 382 violation. The employer may not report it to the Clearinghouse. The employer may not require a SAP evaluation or a return-to-duty test on the strength of it. The employer may not extend the removal beyond the section 382.505(a) period as a Part 382 matter. What the employer may do is apply its own written drug and alcohol policy, if the policy covers a result in this range and was communicated to the driver in advance.

Many carriers run a zero-tolerance policy that treats any detectable alcohol as a terminable offense. Section 382.505(b) leaves that policy standing. The policy must still be lawful on its own terms: it must be written, it must have been given to the driver, plus it must be applied consistently. A policy applied to one driver and ignored for another invites a discrimination claim that has nothing to do with Part 382. Section 382.601 requires the employer policy to spell out the consequences for a driver found to have an alcohol concentration of 0.02 or greater but less than 0.04, so a driver should be able to read the company answer in the policy itself.

Drivers should read the same distinction from the other side. A 0.02 to 0.039 result is not a DOT violation. It will not appear in a Clearinghouse query. But it is also not a clean result in the eyes of a carrier with a strict policy. Asking what the company policy says, before the test rather than after it, is the only way to know where a driver stands. The DOT Drug Test Rights Checker sets out the rights a driver holds when any DOT test is ordered, including the right to a copy of the policy and the right to challenge a result.

Does a failed DOT alcohol test disqualify the CDL?

A failed DOT alcohol test does not by itself disqualify a CDL under the conviction tables, but it can still take a driver off the road through two other routes. Keeping the three routes apart matters, because each one has its own fix.

The first route is disqualification by conviction. Section 383.51 Table 1 lists the major offenses. One row covers having an alcohol concentration of 0.04 or greater while operating a commercial motor vehicle. A first conviction on that row means a 1-year disqualification from operating a commercial motor vehicle, 3 years if the vehicle was transporting hazardous materials required to be placarded, plus a lifetime disqualification on a second conviction in a separate incident. The key word is conviction. A DOT test result is evidence, not a conviction. A conviction comes from a court or an administrative proceeding, usually a state DUI case. A driver who fails a DOT alcohol test but is never charged or convicted faces no section 383.51 disqualification from the test alone.

The second route is prohibited status in the Clearinghouse. A violation reported under section 382.705 puts the driver in prohibited status. Section 382.501 bars the driver from safety-sensitive functions until the return-to-duty process is complete. This route needs no court and no conviction. It starts the day the employer learns of the result. It ends when a negative return-to-duty test is reported. Most drivers who fail a DOT alcohol test lose their driving work through this route, not through the conviction tables.

The third route is the state downgrade. Since November 18, 2024, when FMCSA notifies the state licensing agency that a CDL or CLP holder is prohibited from operating a commercial motor vehicle, the state must downgrade the commercial driving privilege. The downgrade is recorded on the driver record. The privilege is reinstated only after the driver completes the return-to-duty process and the state is notified. The Clearinghouse Downgrade Checker walks through the downgrade timeline plus the reinstatement steps.

One more point catches drivers by surprise. A DUI in a personal vehicle can disqualify the CDL even though no commercial vehicle was involved. The first row of Table 1, being under the influence of alcohol as prescribed by state law, applies in a non-commercial vehicle too, with the same 1-year first-offense period. A Saturday night in a personal car can cost a commercial license on Monday morning. The 0.04 row is the only alcohol row limited to commercial vehicles.

How long must alcohol test records be kept?

Section 382.401 sets the retention schedule for drug and alcohol program records. The tiers turn on the type of record, not on whether the driver still works for the employer. A terminated driver file stays on the retention clock just the same.

Keep forRecords
5 yearsAlcohol test results of 0.02 or greater; verified positive drug results; refusals to test; driver evaluations and referrals; EBT calibration documentation; program administration records; the annual calendar year summary
2 yearsRecords related to the collection process, other than EBT calibration, including reasonable suspicion decision documents
1 yearNegative and canceled drug results; alcohol test results below 0.02
While performing the function, plus 2 yearsSupervisor and driver training records
3 yearsClearinghouse query records, under section 382.701(e)

The tier that trips employers up is the 5-year tier for alcohol results of 0.02 or greater. It covers the 0.02 to 0.039 removal band as well as the 0.04 violation band. An employer who files a 0.03 result as a minor matter and discards it after a year has broken the retention rule, even though the result itself was not a violation. The checker above shows the keep-until date for the result you enter, so the file can be marked on the day of the test.

Retention and Clearinghouse availability are different clocks. Section 382.401 governs the paper in the employer file. Section 382.719 governs how long a violation stays available to employers running Clearinghouse queries. A record can leave the Clearinghouse while the employer file still holds it, or the reverse. The DOT Record Retention Checker covers the full retention schedule, including the collection-process records and the training records that this tool does not itemize.

Penalties for program violations sit in Part 386. An employer that fails to keep required records, or that uses a driver known to have a violation, faces civil penalties assessed under Part 386 Appendix B, with the current amounts adjusted for inflation each year. The FMCSA Fines Calculator works out the current penalty range for a drug and alcohol program violation.

How do you use the DOT Alcohol Test Result Checker?

Work through the fields in order. The tool updates with every change, so you can fix an answer and watch the verdict change.

  1. Enter the alcohol concentration from the test result.
  2. Say whether the result came from a confirmation test, a screening test, or a roadside test.
  3. Pick the test circumstance and whether you are the driver or the employer.
  4. Enter the test date and time plus the next scheduled duty period.
  5. Read the verdict, the checks, plus the deadlines.
  6. Copy the summary for the file or the driver.

Use the confirmation result when you have it. The tool reads a screening result as a prompt for a confirmation test, not as a verdict, because that is how the regulation treats it. If the confirmation test has not happened yet, the window the tool shows tells you when it must start. If the confirmation result is already on the alcohol test form, change the test type to confirmation and enter that number.

Copy the summary before the driver leaves the collection site or the office. The copy includes the verdict, the checks, the deadlines, the actions, plus the documentation checklist, which is the skeleton of the file entry the employer must keep. Paste it into the file, then add the driver name, the test times, plus the name of the person who received the result. The checklist is a starting point, not the finished record: the finished record needs the alcohol test form itself.

Questions drivers ask

Is 0.04 a failed DOT alcohol test?

Yes. A confirmation result of 0.04 or higher is a violation of 49 CFR 382.201. The driver is removed from safety-sensitive functions at once, the employer reports the result to the Clearinghouse by the close of the third business day, plus the driver must complete the substance abuse professional process and pass a return-to-duty alcohol test below 0.02 before driving again.

What happens if a DOT alcohol test reads 0.02?

A result of 0.02 falls in the removal band, not the violation band. Under 49 CFR 382.505, the driver is removed from safety-sensitive functions until the start of the next regularly scheduled duty period, but not less than 24 hours following administration of the test. There is no SAP process, no Clearinghouse report, plus no CDL downgrade from a 0.02 result alone.

How long after a 0.02 result can a driver return to duty?

The driver returns at the later of two times: 24 hours after the test, or the start of the next regularly scheduled duty period. If the next shift starts 30 hours after the test, the driver returns at the shift start. If the next shift starts 12 hours after the test, the driver returns at the 24-hour mark. The checker above computes the exact return time from the test time plus the next duty period.

Does a 0.02 alcohol result go on the Clearinghouse record?

No. Only alcohol confirmation results of 0.04 or higher are reported to the Clearinghouse, under 49 CFR 382.705(b)(1)(i). A 0.02 to 0.039 result is not a violation, so it is not reported and it does not put the driver in prohibited status. The employer still keeps the test record for 5 years under section 382.401(b)(1)(i).

What alcohol level must a return-to-duty test show?

A return-to-duty alcohol test must read below 0.02, per 49 CFR 40.305(a). A result of 0.02 to 0.039 is not a new violation, but it does not satisfy the return-to-duty requirement. The driver stays out of safety-sensitive functions. A result of 0.04 or higher on a return-to-duty test is a new DOT violation. The driver starts the SAP process again.

Can an employer fire a driver for a 0.03 alcohol result?

Under Part 382, no action beyond the removal is allowed: section 382.505(b) bars any action under Part 382 based solely on a result below 0.04. Under company policy, the answer depends on the written policy. Section 382.505(b) preserves employer authority independent of Part 382, so a carrier with a communicated zero-tolerance policy may act under that policy. The policy must be written, given to the driver in advance, plus applied consistently.

Related tools

Sources

Follow on WhatsApp Ask by Voice