Skip to main content

Trucking Mind

Tap the restriction letters printed on your CDL

Type any letter you see in the restriction box. The decoder also explains codes that are not on the federal list.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice โ€” restriction rules vary by state, so confirm the removal steps with your state licensing agency before you book a test.

Quick answer: Your CDL lists restriction codes that limit what you may drive: E bars manual transmissions, L bars air brakes, Z bars full air brakes, O bars tractor-trailers, M and N limit passenger vehicles, K limits you to one state, V notes a medical variance. This decoder explains each code and gives the exact steps to remove it.

Last reviewed: ยท Focus keyword: CDL restriction codes

What are CDL restriction codes?

A CDL restriction code is a letter printed on your commercial driver license that limits what you may drive. The federal rules list eight codes: E, K, L, M, N, O, V and Z. Each code bars one kind of vehicle, equipment or operation.

Restrictions sit in the restriction box on the front of your license, next to your class and endorsements. A driver with no restrictions has a blank box. A driver with several codes sees them listed together, for example E and L.

Restrictions differ from endorsements. An endorsement adds a privilege, such as hauling hazardous materials or driving a bus, while a restriction takes one away. Most restrictions come from the vehicle you used for your skills test, not from anything you did wrong.

States may add their own codes on top of the eight federal codes. A state code must be explained on the front or back of your license. If your license shows a letter that is not in the federal list, check the back of the card first.

How do you use the CDL Restriction Decoder?

  1. Tap the restriction letters printed on your CDL, or type them in the box.
  2. If you do not know the letter, pick how the restriction got on your license instead.
  3. Press Decode my restrictions to see each code explained.
  4. Read what each code bars and why it was placed. Then read the steps to remove it.
  5. Check the job note for each code to see which work it blocks.
  6. Copy the summary for your own records, or reset the decoder to start over.

The decoder covers the eight federal codes and explains anything else you type. Type a letter such as Q and it tells you the letter is a state code and where to find its meaning. P and X get a special note, because they mean one thing on a learner permit and another on a full CDL.

All 8 CDL restriction codes at a glance

This table lists every federal restriction code with its official wording from 49 CFR 383.153(a)(10) and the route to remove it. Use it as a quick reference, then read the section for your code for the full detail.

CodeFederal wordingWhat it barsHow to remove it
ENo Manual transmission equipped CMVManual transmission CMVsModified skills test in a manual CMV
KIntrastate onlyDriving outside your home stateRe-certify as interstate at 21, with a medical certificate
LNo Air brake equipped CMVAny CMV with air brakesModified skills test plus air brake pre-trip and knowledge test
MNo Class A passenger vehicleClass A passenger vehiclesPassenger skills test in a Class A vehicle
NNo Class A and B passenger vehicleClass A and B passenger vehiclesPassenger skills test in a Class A or B vehicle
ONo Tractor-trailer CMVFifth-wheel tractor-trailersFull retest: all three skills tests
VMedical varianceDriving without variance paperwork, outside variance limits, or in CanadaEnds when the variance ends
ZNo Full air brake equipped CMVCMVs with full air brakesModified skills test plus air brake pre-trip and knowledge test

What does the E restriction mean on a CDL?

The E restriction bars you from driving any CMV with a manual transmission. You may drive automatics only. The official wording is No Manual transmission equipped CMV.

E comes from the skills test. If you test in a vehicle with an automatic transmission, the state must place E on your license. The rule is 49 CFR 383.95(c).

Automatic covers more than you might think. The definition in 49 CFR 383.5 says a manual transmission uses a driver-operated clutch and a gear-shift mechanism.

Every other transmission counts as automatic, including automated manual transmissions. Testing in an automated manual truck earns the E restriction.

Removal is a modified skills test, not a full retest. Book the test with your state licensing agency and bring a CMV with a stick shift and a clutch pedal.

Pass the test in that vehicle. You do not need entry-level driver training for this removal.

E used to hurt more than it does now. Most large fleets run automatics, so many driving jobs stay open. Smaller fleets, older trucks and some specialized hauling still use manuals, so E can still cost you work.

What is the difference between the L and Z restrictions?

L and Z both limit air brakes, but at different levels. L bars every CMV with air brakes. Z bars only CMVs with brakes that work fully on air, while air-over-hydraulic brakes stay open.

L has two triggers under 49 CFR 383.95(a). You fail the air brake part of the knowledge test, or you take the skills test in a vehicle with no air brakes at all. Either way the state places L.

Z has one trigger: a skills test in a vehicle with air-over-hydraulic brakes. Those brakes work partly on air and partly on hydraulics, so the state limits you to that partial system. The rule is 49 CFR 383.95(b).

Both codes come off the same way under 49 CFR 383.135(b)(7). Pass the air brake knowledge test and perform the air brake pre-trip inspection. Then pass a modified skills test in a CMV with full air brakes.

L is the heavier limit. Almost every heavy CMV has air brakes, so L closes nearly all Class A work and most Class B work. Z leaves lighter air-over-hydraulic trucks open, which covers some local and delivery work.

Brush up on the knowledge test with the CDL Practice Test: General Knowledge before you sit the air brake section. A pass needs 80 percent correct.

What does the O restriction mean on a CDL?

The O restriction bars you from driving a tractor-trailer connected by a fifth wheel. You may drive other Class A combinations, but not the standard tractor-trailer. The official wording is No Tractor-trailer CMV.

O comes from the test vehicle. If you take the Class A skills test in a combination joined by a pintle hook or another non-fifth-wheel connection, the state must place O on your license. The rule is 49 CFR 383.95(d).

O is the only restriction that needs a full retest to remove. You must retake all three skills tests, pre-trip inspection, basic vehicle control and on-road driving, in a representative tractor-trailer with a fifth wheel. The rule is 49 CFR 383.135(b)(8).

O is rare, because most Class A applicants test in a standard tractor-trailer. When it does appear, it is costly: it blocks most Class A jobs. Removal takes a full day of testing, so book the retest early.

What do the M and N restrictions mean?

M and N limit passenger driving by vehicle class. They apply only to drivers with a passenger endorsement, with M barring passenger vehicles that need a Class A CDL and N barring vehicles that need a Class A or Class B CDL.

Both codes come from the passenger skills test. Test in a Class B bus and the state places M, while a test in a Class C bus or van places N. The rules are 49 CFR 383.95(e) and (f).

Removal means retesting in a bigger vehicle. Pass the passenger skills test in a Class A passenger vehicle and both codes come off. Pass it in a Class B vehicle and N comes off while M stays.

Your state licensing agency sets the test, since the federal rule sets no special removal test for M or N. Ask the agency which vehicle counts as representative before you book.

N is the code that limits jobs. Most bus driving needs a Class B vehicle or larger, so N leaves only small vans and minibuses. M rarely matters, because Class A passenger combinations are rare.

If you are unsure which class your vehicle needs, run the CDL Class Checker before you book a test. It works from your vehicle weights and passenger count.

What does the K restriction mean on a CDL?

The K restriction limits you to driving inside your home state. You may not cross a state line in a CMV or haul freight that crosses a state line. The official wording is Intrastate only.

K comes from self-certification under 49 CFR 383.71(b)(1), not from a test. When you apply for a CDL you certify the kind of driving you do. Certify as an intrastate driver and the state places K.

Age is the other trigger. Federal law sets 21 as the minimum age for interstate driving under 49 CFR 391.11(b)(1). Drivers aged 18 to 20 may hold a CDL, but only for intrastate work.

Removal needs paperwork, not a test. Once you turn 21, pass a DOT physical and hold a valid medical certificate, then file a new self-certification as a non-excepted interstate driver with your state licensing agency. Under 21, K cannot be removed.

K is the most job-limiting restriction of all. Interstate work covers most long-haul and regional jobs. Local delivery, farm work and other intrastate jobs stay open while K is on your license.

What does the V restriction mean on a CDL?

The V restriction notes a medical variance on your CDL record. A medical variance is FMCSA permission to drive despite a condition that would otherwise disqualify you. The official wording is simply Medical variance.

V covers several routes. The best known is the Skill Performance Evaluation certificate for limb loss or impairment under 49 CFR 391.49. Other routes include an FMCSA exemption under Part 381 and the alternative standards for vision and insulin-treated diabetes.

When FMCSA grants a variance, it tells your state. The state then places V on your license and on your CDLIS driver record.

V stays on the license while the variance is in force. It comes off when you qualify without a variance, or when the variance ends. An SPE certificate runs for up to 2 years and can be renewed from 30 days before it expires, with no skills test for V removal.

V carries two duties. Carry the variance paperwork whenever you drive and stay inside the limits the variance sets. V also bars driving a CMV in Canada, under the note to 49 CFR 383.95(g).

Some carriers will not hire drivers with a variance, so check with a carrier before you apply. If your variance relates to a physical condition, prepare for the exam with the DOT Physical Readiness Checker.

Track your readings first with the DOT Blood Pressure Tracker if blood pressure is part of your case. A week of readings tells you more than one reading on exam day.

How do restrictions get placed on a CDL?

Four routes place restrictions: the test vehicle places E, L, Z, O, M and N; the knowledge test places L when you fail the air brake section; self-certification places K; a medical variance places V.

The test vehicle is the route most drivers meet. The state must match the restriction to the vehicle you tested in, so the test vehicle decides even if you can drive other equipment.

Test in an automatic and you get E. Test with no air brakes and you get L. Test with air-over-hydraulic brakes and you get Z.

The knowledge test route is narrower. Only the air brake section can place a restriction: fail it and you get L. Fail the combination vehicle section and the state must not issue a Group A license at all under 49 CFR 383.135(a).

One date matters. Drivers who held a CDL before July 8, 2015 were not retested for the newer restrictions. Z, E and O apply only to applicants who take skills tests on or after that date, under 49 CFR 383.153(g).

How do I remove a restriction from my CDL?

Removal depends on the code: L, Z and E come off with a modified skills test, which is shorter than the full test; O needs all three skills tests again; K needs paperwork; V ends when the variance ends; M and N need a passenger skills test in a bigger vehicle.

The modified test is the good news. Under 49 CFR 383.135(b)(7), a driver removing L, Z or E does not retake the complete skills test. The state runs a shorter test in the right vehicle, with L and Z also needing the air brake pre-trip inspection and the air brake knowledge test.

Entry-level driver training is not required for these removals. Federal rule 49 CFR 380.603(a)(4) exempts restriction removal under 383.135(b)(7) from ELDT. A school that tells you to buy a full course to remove E, L or Z is selling you training the rule does not require.

Fees and scheduling vary by state, so this page lists no dollar figures. Your state licensing agency sets the test fee, the retest fee and the fee for a replacement license. Book early and bring the right vehicle, then confirm the fee before you arrive.

A restriction is not a disqualification. A restriction limits what you may drive, while a disqualification takes the license away for a set period. If you are dealing with a disqualification rather than a restriction, run the CDL Disqualification Checker to see the period the rules set.

Which restrictions limit my trucking jobs?

K limits jobs most. It bars all interstate work, which covers most long-haul and regional jobs. A driver with K works local or intrastate routes only.

L runs second. Air brakes sit on nearly every heavy CMV, so L closes almost all Class A work and most Class B work. Removing L opens the widest set of jobs for the least testing.

E and Z sit in the middle. E blocks manual fleets, which are shrinking but still common in specialized hauling. Z blocks full air brake vehicles, which covers most tractors, while lighter air-over-hydraulic trucks stay open.

O blocks standard tractor-trailer work, which is most Class A jobs, but O is rare. N blocks most bus jobs, while M rarely matters. V does not block jobs by itself, but some carriers screen out drivers with a variance.

If you hold several codes, remove them in job order. K first if you want interstate work, then L, then E or Z. Each removal is a separate test or filing, so plan the sequence with your state licensing agency.

CDL restrictions vs endorsements

Restrictions and endorsements sit side by side on your license, but they work in opposite directions. A restriction takes away a privilege. An endorsement adds one.

Endorsements use their own letters: T for double and triple trailers, P for passenger, N for tank vehicle, H for hazardous materials, X for tank plus hazardous materials. S stands for school bus.

That overlap confuses drivers. N as an endorsement means tank vehicle, while N as a restriction means no Class A and B passenger vehicle. The box on the license tells you which list the letter sits in, so check the label, not just the letter.

P and X confuse drivers in a second way. On a learner permit they are restriction codes: P means no passengers in a CMV bus, X means no cargo in a CMV tank vehicle. On a full CDL, P is the passenger endorsement and X is the tank plus hazmat combination.

Endorsements need tests of their own. Some need training or a federal security check. Restrictions need no training course to remove, only the test or filing the rule sets, so keep the two lists apart when you read your license.

What if my license shows a code that is not on this list?

First, check the back of your license. States may add their own restriction codes under 49 CFR 383.153(a)(10)(ix), with each one explained on the front or back of the card. The meaning is usually printed right there.

Second, check whether you hold a learner permit. A CLP carries two codes a CDL never carries: P means no passengers in a CMV bus, X means no cargo in a CMV tank vehicle. Those codes vanish when the permit becomes a full license.

Third, ask your state licensing agency, since the state placed the code and holds the record. Bring the license and ask what the code bars and what removes it. Do not guess: driving outside a restriction can cost you the license.

Type the letter into the decoder above. It flags state codes and CLP codes and points you to the right source. The decoder covers the eight federal codes in full detail and explains anything else you type.

Frequently asked questions

What are the CDL restriction codes?

The eight federal codes are E, K, L, M, N, O, V and Z: E bars manual transmissions, L bars air brakes, Z bars full air brakes, O bars tractor-trailers, M and N limit passenger vehicles by class, K limits you to one state, V notes a medical variance. States may add their own codes, explained on the license.

How do I remove the E restriction from my CDL?

Pass a modified skills test in a CMV with a manual transmission. Neither a full retest nor entry-level driver training is needed for this removal. Your state licensing agency schedules the test and issues a new CDL without the E restriction.

What is the difference between the L and Z restrictions?

L bars every CMV with air brakes, while Z bars only CMVs with brakes that work fully on air. A driver with Z may still drive a CMV with air-over-hydraulic brakes. Both codes come off with a modified skills test in a full air brake vehicle, plus the air brake pre-trip inspection and the air brake knowledge test.

Can I drive interstate with a K restriction?

No. The K restriction limits you to driving inside your home state. To remove it, be 21 or older, hold a valid medical certificate, then re-certify as a non-excepted interstate driver with your state licensing agency.

What does the V restriction mean on a CDL?

V notes a medical variance on your CDL record, which is FMCSA permission to drive despite a condition that would otherwise disqualify you, granted as a Skill Performance Evaluation certificate, an exemption, or qualification under an alternative standard. V stays on the license while the variance is in force. It also bars driving a CMV in Canada.

Do I need ELDT to remove a CDL restriction?

No, not for L, Z or E: federal rule 49 CFR 380.603(a)(4) exempts restriction removal under 49 CFR 383.135(b)(7) from entry-level driver training. O removal needs a full skills retest, not ELDT, because you already hold the Class A license. M, N, K and V removals need no training course either.

Related tools

Sources

  1. 49 CFR 383.95, Restrictions. law.cornell.edu/cfr/text/49/383.95 Accessed November 19, 2026.
  2. 49 CFR 383.135, Passing knowledge and skills tests. law.cornell.edu/cfr/text/49/383.135 Accessed November 19, 2026.
  3. 49 CFR 383.153, Information on the CLP and CDL documents and applications. law.cornell.edu/cfr/text/49/383.153 Accessed November 19, 2026.
  4. 49 CFR 383.71, Driver application procedures. law.cornell.edu/cfr/text/49/383.71 Accessed November 19, 2026.
  5. 49 CFR 391.11, General qualifications of drivers. law.cornell.edu/cfr/text/49/391.11 Accessed November 19, 2026.
  6. 49 CFR 391.49, Alternative physical qualification standards for the loss or impairment of limbs. law.cornell.edu/cfr/text/49/391.49 Accessed November 19, 2026.
  7. 49 CFR 380.603, Applicability. law.cornell.edu/cfr/text/49/380.603 Accessed November 19, 2026.
  8. 49 CFR 383.5, Definitions. law.cornell.edu/cfr/text/49/383.5 Accessed November 19, 2026.
Follow on WhatsApp Ask by Voice