Skip to main content

Trucking Mind

Authority at risk. FMCSA requires a designation of agents for process on file to avoid revocation proceedings. A missing state on your BOC-3 is a gap in that designation. Fix gaps before the next load, not after a notice arrives.

Tick the states that need coverage, then say how your BOC-3 is filed today. Every answer updates as you change each field.

Your operation

A blanket filing names one company that covers every state at once. Individual agents are named one state at a time. The coverage test follows from your entity type.

States you are authorized to operate in, plus every state you drive through
States where you already have a process agent named

1 state without coverage

You need coverage in 2 states. Your current filing covers 1 of them. The gap state is: Oklahoma. Name a process agent for each gap state and file a new BOC-3, or switch to a blanket filing that covers every state at once.

Filing route

Either route closes the gap. Name an agent for each gap state, or switch to one blanket filing for the whole map.

The checks

CheckResultDetail
Who must filePassFor-hire motor carrier. BOC-3 required.
States needing coveragePass2 states need a process agent.
Filing typePassIndividual agents named per state.
CoverageFail1 gap: Oklahoma.
Filing routePassIndividual agents work for a map of 2 states.
Authority riskFailA missing designation puts operating authority at risk of revocation proceedings.

Gap states

  • Oklahoma – no process agent on file for this state.

Notes

  • FMCSA requires the designation on file to avoid revocation proceedings. Fix gaps before the next load, not after a notice arrives.
  • A designation changes only by a new designation. File a new BOC-3 when an agent changes.
  • Keep one copy of the filed BOC-3 at your principal place of business. 49 CFR 366.2T.

This checker applies 49 CFR Part 366 to your answers. It is not legal advice. It cannot read your FMCSA record: confirm the BOC-3 line in the Motus public search before you rely on a result.

Your inputs stay in this browser. Nothing is sent to our servers. There is no account to create.

Disclaimer: This tool is provided for general information only. It is not legal advice โ€” check your FMCSA record and the current regulation before you rely on a result.

Quick answer: A BOC-3 names a process agent in every state where the law requires one. A for-hire carrier needs an agent in each state it is authorized to operate in and each state it drives through. A broker needs one in each state where it has an office or writes contracts. A blanket filing covers all 50 states and the District of Columbia at once. This checker compares the states you list against your current filing and names every gap.

Last reviewed: ยท Focus keyword: BOC-3 states required

What is a BOC-3?

A BOC-3 is the FMCSA form that names your process agents. A process agent is a person or company in a state who can accept court papers for you if someone sues your business there. The formal title of the form is Designation of Agent for Service of Process. The rule behind it is Part 366 of Title 49 of the Code of Federal Regulations.

The idea is simple. A trucking company runs in many states, but a court in any one of them needs a reliable address where legal papers can be served. The BOC-3 gives every state that address. Without it, a plaintiff could not easily bring a case against an out-of-state carrier. FMCSA would have no way to reach the carrier with its own orders.

Every for-hire motor carrier, broker and freight forwarder with FMCSA operating authority must have a BOC-3 on file. FMCSA will not grant operating authority until the designation is in place. The sections in force today are the T versions of Part 366. The earlier versions were suspended in January 2017. The T text has governed ever since.

Who must file a BOC-3?

For-hire motor carriers must file. That covers any carrier hauling freight or passengers for pay across state lines, from a one-truck owner-operator to a national fleet. The size of the operation makes no difference to the rule. If you hold interstate operating authority as a for-hire carrier, a BOC-3 must be on file.

Property brokers must file too, under a different coverage test. A broker needs a process agent in each state where it has an office or writes contracts. Freight forwarders follow the same offices-and-contracts pattern. If you are unsure whether your operation needs federal authority at all, the Do I Need a DOT/MC Number tool runs the basic test.

Private carriers do not file, for now. A company hauling only its own goods in its own trucks is a private carrier. FMCSA states that only for-hire carriers must designate a process agent until all Unified Registration System provisions take effect. That exception ends in two cases: hauling freight for hire, or driving in the United States between points in a foreign country.

Intrastate-only carriers do not file either. A BOC-3 is a federal filing tied to interstate operating authority. A carrier that never crosses a state line holds no interstate authority and has no federal process-agent filing to make. The moment a load crosses a state line, the operation becomes interstate and the federal rule applies.

Which states need a process agent?

For a motor carrier, the answer has two parts. Section 366.4T(a) requires a designation for each state you are authorized to operate in and for each state you travel through during those operations. A carrier with authority in Texas who runs loads through Oklahoma and Arkansas needs agents in all three states, not just Texas.

That second part catches carriers out. A through state counts even when you never pick up or deliver there. If your route crosses a state, you need an agent there. The practical result is that most interstate carriers need coverage far beyond their home state, which is why the blanket filing described below is so common.

For a broker, the test is different. Section 366.4T(b) requires a designation for each state where the broker has an office or writes contracts. A broker working from one office but writing contracts with carriers in twenty states needs agents in all twenty-one states.

The District of Columbia counts as a state. Section 390.5 of the regulations defines State to include the District of Columbia, so a carrier authorized to run into Washington needs an agent there too. The checker lists all 50 states plus the District of Columbia, 51 jurisdictions in total.

One old rule no longer applies. A suspended 2015 version of the regulation would have required agents in all 48 contiguous states and the District of Columbia for most carriers. That version never took effect. The rule in force today is the authorized-plus-traversed test in section 366.4T(a).

What is a blanket BOC-3 filing?

A blanket filing is one designation that covers every state at once. Under section 366.5T, an association or corporation files a list of process agents with FMCSA, one for each state. A carrier then names that company on its BOC-3 instead of listing an agent for every state itself. The statement covers the persons on the list and any later revisions to it.

FMCSA publishes a list of registered blanket companies on its process agents page. These companies file BOC-3 designations electronically for motor carriers, brokers and freight forwarders. They designate agents in all US states and the District of Columbia. Most small carriers use a blanket company and never think about individual agents.

A blanket filing also covers states you add later. Because the designation reaches every state where you are or may be authorized to operate, running into a new state does not require a new BOC-3. That is the main advantage over naming agents one state at a time.

You can mix the two forms. The blanket statement covers every state except those for which you name individual designations. A carrier that wants its own agent in its home state and blanket coverage everywhere else can file exactly that combination.

Blanket or individual agents: which route fits your operation?

Both routes satisfy the regulation. The choice is about how many states you run in and how much upkeep you want. A carrier running in two states can name two agents and be done. A carrier running in thirty states would need thirty agents, thirty addresses to keep current and a new filing every time one of them changes.

The table below compares the two routes on the points that matter most: coverage, upkeep, cost shape and what happens when your map grows.

Blanket filingIndividual agents
CoverageAll 50 states and DC in one filingOnly the states you name, one by one
UpkeepThe blanket company keeps the agent list currentYou track every agent and file a new BOC-3 for each change
Adding a stateAlready covered, no new filing neededName a new agent and file a new BOC-3 first
Best fitCarriers and brokers running in many statesCarriers running in one to three states

For most interstate carriers, the blanket route wins on upkeep alone. The individual route makes sense only for a small, stable map where you know each agent personally. Either way, the checker above shows which route fits the map you entered.

Can I file a BOC-3 myself?

If you are a motor carrier, no. Only a process agent can file Form BOC-3 on behalf of a motor carrier applicant. You hire a blanket company or an individual agent. That agent files the form with FMCSA for you. The filing is usually electronic and posts fast, but the carrier itself cannot submit it.

If you are a broker or a freight forwarder without commercial motor vehicles, yes. FMCSA allows a broker or freight forwarder applicant without CMVs to file Form BOC-3 on its own behalf. That is the one self-filing route in the rule.

You can also name yourself as an agent, but only in your home state. The form instructions allow a carrier, broker or freight forwarder to designate itself for the state in which it resides. Every agent must reside in or maintain an office in the state covered, under section 366.3T. A post office box is not acceptable as an agent address.

A state official can serve as an agent only with proof that the official agrees to accept service of process. In practice almost nobody uses that route. Blanket companies exist precisely because naming fifty-one separate agents is slow work that a specialist does better.

How much does a BOC-3 filing cost?

FMCSA charges no separate fee for the BOC-3 filing itself. The form carries no line in the FMCSA fee schedule, unlike the operating authority application or a reinstatement petition. What you pay goes to the process agent company for its service, not to the government.

Blanket companies set their own service fees. The fees vary from company to company. Some charge a one-time fee for the filing. Others charge a first-year fee with a renewal charge in later years. Ask what the fee covers before you pay: the filing itself, future revisions to the agent list and any re-filing if the company changes its agents.

Cost is the wrong reason to skip the filing. A missing BOC-3 can put operating authority at risk. Reinstating a revoked authority costs time and money that dwarf any filing fee. The filing is one of the cheapest compliance items a carrier buys.

What happens if your BOC-3 lapses?

A BOC-3 has no fixed expiry date, but a designation can still go dead. The blanket company may go out of business. The agent may stop covering you. The company may change its agent list without telling you. In each case FMCSA no longer has a working designation on file for your operation, even though nobody sent you a cancellation notice.

The consequence is serious. FMCSA states that entities must maintain proof of insurance and a designation of agents for process on file to avoid revocation proceedings. A lapsed BOC-3 puts operating authority at risk. New authority will not be granted at all until a designation is on file.

New applicants face a clock. Insurance and BOC-3 filings are due within 20 days of publication in the FMCSA Register. Miss that window and FMCSA serves a decision warning that the application will be dismissed unless the filings arrive within 60 days. The Operating Authority Activation Timeline walks through each dated step from application to active authority.

If authority was already revoked for a missing BOC-3, the fix has a set order. First get a new designation on file through a process agent. Then request reinstatement and pay the FMCSA fee. FMCSA will not reinstate until the BOC-3 and insurance are back on file and the USDOT number is active. The MC Reinstatement Checker runs the full sequence for your situation.

How do you change or cancel a BOC-3?

You change a designation by filing a new one. Section 366.6T states that a designation may be canceled or changed only by a new designation. There is no amendment form and no phone call that updates the record. The new BOC-3 replaces the old one, because only one completed current form may be on file at a time.

The one exception covers an operation that stops. Where a carrier or broker ceases to be subject to the coverage rule in whole or in part for one year, the designation is no longer required and may be canceled without a new designation. A carrier that shuts down does not need to keep agents on file forever.

A name change needs a fresh filing fast. After FMCSA issues a re-entitlement letter for a name change to operating authority, the amended BOC-3 and proof of insurance filings must reach FMCSA within 30 days. FMCSA warns that the authority is at risk of revocation if the amended filings are not updated in time.

Keep your own copy safe. Section 366.2T requires one copy of the filed BOC-3 to be kept at your principal place of business. For a one-truck operation that may be a home office. Ask your process agent for a copy of what was filed. Keep it where you can find it in an audit.

How do you check your BOC-3 status?

Look up your own record. FMCSA Motus public search shows the BOC-3 line for any carrier by USDOT number or legal name. If the line reads active with a current agent listed, the designation is good. If it reads inactive or blank, the filing needs attention.

Check after any change. A new blanket company, a switch of agents, a name change or a lapse in payment can each leave the FMCSA record behind the real position. A two-minute lookup after each change catches a stale record before a broker or an inspector finds it. The USDOT and MC Lookup builds the links to the FMCSA record pages for any USDOT or MC number.

New carriers should check early. The BOC-3 is one of the filings that must be in place before authority turns active, alongside insurance. The Motus Readiness Check runs through the registration steps for a new authority. The New-Entrant Timeline Tracker maps the 18-month monitoring period that follows activation.

BOC-3 vs insurance filing: what is the difference?

New carriers mix the two filings up. They are separate requirements that both must stay on file. The BOC-3 names the people who can accept court papers for you in each state. The insurance filing proves you carry the minimum liability coverage the law requires. One is about legal process, the other is about financial responsibility.

The forms differ too. The BOC-3 is filed by your process agent. The liability proof is filed by your insurer on Form BMC-91 or BMC-91X. A broker files a surety bond or trust fund instead, on Form BMC-84 or BMC-85. Each filing has its own timing and its own failure mode. A gap in either one puts authority at risk.

Keep both current together. When insurance changes, confirm the new BMC-91 posts before the old policy cancels. When the process agent changes, confirm the new BOC-3 posts before the old designation goes stale. The FMCSA Insurance Minimums Checker gives the federal liability floor for your operation. The MCS-150 Due-Date Checker keeps the biennial update on schedule so the USDOT number stays active.

How do you use the BOC-3 Coverage Checker?

  1. Pick your entity type: for-hire motor carrier, property broker, freight forwarder, private carrier or intrastate-only carrier.
  2. Tick every state that needs coverage. Carriers tick each state they are authorized to operate in and each state they drive through. Brokers and freight forwarders tick each state where they have an office or write contracts.
  3. Say how your BOC-3 is filed today: blanket filing through a service, individual agents per state, no filing or unsure.
  4. If you use individual agents, tick the states where you already have an agent named.
  5. Read the verdict, the gap list and the filing route. The check table shows each test and the notes explain what to do next.
  6. Copy the summary for your own records, or reset the checker to start over.

Frequently asked questions

Do I need a BOC-3 for every state?

A for-hire carrier needs a process agent in each state it is authorized to operate in and each state it drives through. That is usually most of the country for an interstate carrier, which is why most carriers use a blanket filing that covers all 50 states and the District of Columbia at once. A broker needs an agent only in the states where it has an office or writes contracts.

What is a blanket BOC-3?

A blanket BOC-3 names a blanket company on Form BOC-3 instead of listing an agent for every state. The company has filed a list of process agents with FMCSA, one for each state. The designation covers that list plus later revisions to it. One filing then covers every state where you are or may be authorized to operate, including states you drive through.

Can I file a BOC-3 myself?

Only if you are a broker or a freight forwarder without commercial motor vehicles. A motor carrier cannot file its own BOC-3: only a process agent can file Form BOC-3 for a motor carrier. You hire a blanket company or an individual agent. That agent files the form with FMCSA for you.

Does a BOC-3 expire?

No. A BOC-3 has no fixed expiry date. A designation filed years ago can still be valid today. The risk is not expiry but lapse: the agent may go out of business or stop covering you, which leaves FMCSA without a working designation. Check the BOC-3 line in the FMCSA Motus public search after any change of agent.

What happens if my BOC-3 lapses?

FMCSA requires a designation of agents for process on file to avoid revocation proceedings, so a lapsed BOC-3 puts operating authority at risk. File a new BOC-3 through a process agent as soon as you find the gap. If authority was already revoked, the designation must be back on file before FMCSA will reinstate it.

Do private carriers need a BOC-3?

Not for domestic operations. FMCSA states that only for-hire carriers must designate a process agent until all Unified Registration System provisions take effect. The exception is a private carrier driving in the United States between points in a foreign country, which must designate an agent for each state traversed.

Related tools

Sources

  1. 49 CFR Part 366, Designation of Process Agent (T versions in force). ecfr.gov/current/title-49/part-366 Accessed November 19, 2026.
  2. 49 CFR 390.5, definition of State. ecfr.gov/current/title-49/part-390/section-390.5 Accessed November 19, 2026.
  3. FMCSA, Form BOC-3 – Designation of Agents for Service of Process. fmcsa.dot.gov/registration/form-boc-3-designation-agents-service-process Page last updated July 16, 2026. Accessed November 19, 2026.
  4. FMCSA, Designation of Agents for Service of Process. fmcsa.dot.gov/registration/process-agents Accessed November 19, 2026.
  5. FMCSA, Insurance Filing Requirements. fmcsa.dot.gov/registration/insurance-filing-requirements Page last updated March 26, 2026. Accessed November 19, 2026.
  6. FMCSA, AskFMCSA. fmcsa.dot.gov/registration/ask-fmcsa Accessed November 19, 2026.
Follow on WhatsApp Ask by Voice