Skip to main content

Trucking Mind

Quick answer: At a roadside inspection, an officer who thinks a driver does not understand English runs a two-step FMCSA assessment: a spoken interview in English, then a highway sign check. Failing either step puts the driver out of service. This free practice test covers both steps with audio, 26 interview questions and 27 signs and message boards.

Last reviewed against FMCSA guidance:

How the roadside English assessment works

  1. The inspection starts in English. If the driver appears not to understand the first instructions, the officer begins the assessment.
  2. Step 1: driver interview. The officer asks work questions in English and the driver must answer in English. No interpreter, phone app or cue card.
  3. Step 2: highway sign recognition. A driver who passes the interview is asked to explain U.S. highway signs, including electronic message boards.
  4. Result. A driver who fails is placed out of service under 49 CFR 391.11(b)(2).

Sample interview questions to practice

FMCSA has not published the exact questions inspectors use. These follow the topic areas FMCSA recommends carriers cover when they assess a driver’s English.

  • Trip: Where did you start your trip today? Where are you going?
  • Hours and logs: How long have you been driving today? Can I see your logs for the last seven days?
  • License: May I see your driver’s license and medical card? What state issued your CDL?
  • Cargo: What are you hauling? Can I see your bill of lading?
  • Vehicle: Please turn on your left turn signal. When was your last vehicle inspection?

Tips to pass

  • Answer the question that was asked. “Where” needs a place, “when” needs a time, “how long” needs hours.
  • Short, clear sentences are enough. The standard is working English, not perfect grammar.
  • If you did not hear the question, say: “Could you repeat that, please?”
  • For signs, explain what the driver must do, not only read the words aloud.
  • Practice out loud. Tap Listen, answer with your voice, then check the model answer.

Frequently asked questions

What is the FMCSA English proficiency rule for truck drivers?

Under 49 CFR 391.11(b)(2), a commercial driver must read and speak English well enough to talk with the general public, understand highway traffic signs and signals, answer official questions, and make entries on reports and records.

How do inspectors test English at a roadside inspection?

Every inspection starts in English. If the driver seems not to understand, the inspector runs a two-step assessment: first a spoken driver interview in English, then a highway traffic sign recognition check that can include electronic message signs. A driver who fails the interview is not given the sign step.

What happens if a driver fails the English proficiency assessment?

Since June 25, 2025, a driver who fails the roadside English assessment is placed out of service, not only cited.

Can I use a translation app or an interpreter during the assessment?

No. Published FMCSA guidance summaries say interpreters, smartphone translation apps and cue cards are not allowed. The driver has to answer in English without help.

Is this the official FMCSA English test?

No. FMCSA has not published the exact interview questions or signs inspectors use. This practice test is built around the topic areas FMCSA recommends carriers cover: trip origin and destination, time on duty and logs, the driver's license, shipping papers, and vehicle equipment, plus common U.S. highway signs.

What questions should a truck driver expect?

Expect simple work questions: where the trip started and where it is going, how long you have been driving, what you are hauling, and requests to show your license, logs and shipping papers or to operate lights and brakes during the inspection.

Trucking Mind is not affiliated with FMCSA, CVSA or the U.S. Department of Transportation. This is an unofficial practice tool and general information, not legal advice. The real assessment is decided by the inspecting officer, and the official questions and signs are not public. A good score here does not guarantee a pass at the roadside.

Also try: FMCSA Revoked ELD Checker – check whether your ELD is still legal before you roll.

How the FMCSA ELP practice test is scored

Every round in this FMCSA ELP practice test has 10 questions. A full practice round mixes driver interview questions with highway sign recognition, while the two step rounds focus on one skill at a time: Step 1 is the driver interview and Step 2 is highway signs. Your score is the share of questions you answered correctly, shown as a percentage, and the tool saves your best score for each mode on your device.

The score bands match the way the tool describes your result. Score 90% or more and the result is "Roadside ready". Score 70% to 89% and the result is "Almost there" — you understand most of what was asked but still miss some questions. Score below 70% and the result is "Needs practice". After each round the tool shows the questions you missed, so you can see whether the gap is interview answers, signs, or both, and then practise that step again.

Worked example: a 10-question round

Take a driver who answers 8 of the 10 questions correctly. That is 8 ÷ 10 = 80%, so the result is "Almost there". The two missed questions are shown in the review: one is a highway sign the driver could not explain, and one is an interview question about the last seven days of logs that the driver answered with a place instead of a time. The driver repeats Step 2 (highway signs) and practises answering "how long" questions with a time, then retakes the full round. On the second attempt the driver answers 10 of 10, which is 100% and "Roadside ready". The best score of 100% is saved for the full practice mode.

Who should use the FMCSA ELP practice test

This practice test is for any commercial driver who wants to be ready for the roadside English assessment under 49 CFR 391.11(b)(2), especially drivers whose first language is not English. It is also useful for carriers and fleets that want to check that their drivers can handle an inspection in English before they are sent out, and for CDL schools that want a quick way to practise interview answers and sign recognition with students. If you can already answer the interview questions and explain the signs, use the full round as a final check before you drive.

What to do after you practise

If you score 90% or more, keep the skill fresh by retaking a round from time to time and by answering real questions out loud rather than only reading them. If you score below 90%, work on the step you missed most — repeat the driver interview round if your answers were unclear, or the highway signs round if you could not explain what a sign means. If a rule is still unclear, ask the FMCSA voice assistant by voice or text, and confirm anything that affects a compliance decision against the official FMCSA guidance before you rely on it. You can also use the Texas trucking authority checker and the HOS calculator to check the other paperwork and hours rules an inspector may ask about.

By Mike Archer — Last reviewed: November 2026

Follow on WhatsApp Ask by Voice