Skip to main content

Trucking Mind

Cost Per Mile Calculator

Enter your real numbers below. Your true cost per mile โ€” and the rate you must average per loaded mile just to break even โ€” update live as you type.

Diesel prices right now โ€” updated Nov 10, 2026 US average diesel is $6.13/gal (EIA, week ending Nov 9, 2026) โ€” but the state you fuel in changes everything: California is about $8.32, Washington $7.26, and North Carolina is the cheapest at about $5.50 (AAA state averages, Nov 4, 2026). Pick your state below and the fuel price is set for you โ€” the state prices are refreshed daily.
Fixed Costs โ€” per month
Variable Costs
Your Operation

Your Numbers

Total fixed cost (monthly)$0.00
Fixed cost per mile$0.00
Variable cost per mile$0.00
Total monthly cost$0.00
Total cost per mile (all miles)$0.00
Cost per loaded mile$0.00
Profit per loaded mileโ€”
Estimated monthly profitโ€”
Enter your numbers above to see your break-even rate โ€” the lowest pay per loaded mile you can afford to take.
Industry benchmark โ€” ATRI The ATRI average marginal cost of trucking is $2.336 per mile (2025 data, ATRI 2026 report). Your cost per mile is $0.00.

Load Checker โ€” Should You Take This Load?

Checking a load on the board? Enter it here. The verdict uses YOUR costs from above โ€” or the ATRI industry average if you have not entered yours yet.

The Load
Enter a load aboveYour verdict โ€” take it, negotiate, or pass โ€” will appear here.

This Load’s Numbers

Rate per loaded mileโ€”
Your cost to run this loadโ€”
Profit / loss on this loadโ€”

Estimates only, for planning purposes. Your real costs will vary with your truck, lanes, fuel prices and how you run. This calculator is not financial advice โ€” talk to your accountant or tax professional for decisions about your business. Benchmark source: ATRI (American Transportation Research Institute), Analysis of the Operational Costs of Trucking, 2026 report (2025 data).

Market direction is a general guide, refreshed weekly from DAT and Truckstop market reports (this version: Nov 4, 2026). It describes reload conditions in a state, not a guarantee of loads โ€” always confirm today’s actual loads on the board before you commit.

If you do not know your cost per mile, you are guessing at every rate โ€” and guessing is how owner-operators run hard all month and still lose money. This calculator turns your real numbers โ€” truck payment, insurance, fuel, maintenance, miles โ€” into the two numbers that decide every load: your true cost per mile and your break-even rate per loaded mile.

For reference, ATRI’s 2026 operational-cost report puts the industry average at $2.336 per mile (2025 data). Your number will differ โ€” that is the point. Enter your own costs below, then use the Load Checker to test any load on the board before you say yes.

FAQ

How do I calculate my cost per mile?

Add up everything the truck costs you in a month โ€” fixed costs like the truck payment, insurance and permits, plus variable costs like fuel, maintenance and tires โ€” then divide by the total miles you ran, loaded and empty together. This calculator does that math live as you type.

What is a good cost per mile for a semi truck in 2027?

There is no single good number โ€” it depends on your truck, your lanes and the fuel price. ATRI’s 2026 report puts the industry average at $2.336 per mile (2025 data). Paid-off trucks with low overhead run well below that; new trucks with high payments run above it. What matters is that your rate per loaded mile stays above your number, not the average.

Should deadhead miles count in my cost per mile?

Yes. Your costs run on every mile, not just the paid ones. That is why this calculator shows both your cost per mile across all miles and your cost per loaded mile โ€” the second number is your true break-even rate.

What is the difference between cost per mile and break-even rate?

Cost per mile spreads your monthly costs over every mile you drive. The break-even rate spreads the same costs over only the miles you get paid for, so it is always higher. Any load paying below your break-even rate loses money once the deadhead is counted.

How often should I recalculate my cost per mile?

Once a month, and any time something big changes: a fuel-price swing, a new insurance bill, a major repair, or a change in your average haul length. A cost per mile from six months ago is a guess today.

What this cost per mile calculator for trucking does

This cost per mile calculator for trucking turns your real monthly costs into the two numbers that decide whether a load pays: your cost per mile and your break-even rate. It splits your costs into fixed costs, which you pay whether the truck moves or not, and variable costs, which grow with every mile. It then shows your total cost per mile across all miles, your cost per loaded mile, and your profit per loaded mile at the rate you enter.

It also loads your state’s current diesel price โ€” the US average is $6.13 a gallon for the week ending 9 November 2026, according to the US Energy Information Administration โ€” and it benchmarks your result against the industry average of $2.336 per mile from the American Transportation Research Institute’s 2026 report (2025 data), so you can see at a glance whether you are running lean or running expensive.

How to use it, step by step

  1. Enter your fixed costs for the month: truck and trailer payments, insurance, permits and licences, ELD and any other fixed cost. These stay the same whether you run 5,000 miles or 12,000.
  2. Pick your state for the diesel price, or type your own price per gallon. Then enter your fuel economy, maintenance cost per mile, tyre cost per mile, tolls and any other variable costs.
  3. Enter your total miles for the month and your loaded miles, or set the deadhead percentage. The calculator works out the empty miles for you.
  4. Enter your average rate per loaded mile. Your Numbers updates live as you type โ€” there is nothing to submit.
  5. Check a specific load with the Load Checker: enter its miles and its rate to see whether that load beats your break-even rate.

How it calculates your cost per mile

Every figure follows the same method, with no hidden assumptions:

  • Fuel cost per mile = diesel price รท miles per gallon. At $6.13 a gallon and 6.5 MPG, fuel costs $0.943 a mile.
  • Variable cost per mile = fuel + maintenance + tyres + (tolls and other variable costs รท total miles).
  • Fixed cost per mile = total fixed costs รท total miles. The more miles you run, the lower this number gets โ€” which is why sitting still is the most expensive thing a truck can do.
  • Total cost per mile = fixed cost per mile + variable cost per mile.
  • Cost per loaded mile = total monthly cost รท loaded miles. This is your break-even rate: the rate at which a load covers its share of everything.
  • Monthly profit = (average rate ร— loaded miles) โˆ’ total monthly cost.

Worked example: one month on the road

Take an owner-operator running 10,000 miles in a month, with 8,500 of them loaded โ€” that is 15 percent deadhead. Fixed costs: truck payment $2,400, trailer $650, insurance $1,400, permits $175, ELD $85 and other fixed costs $150, a total of $4,860 a month. Variable costs: diesel $6.13 a gallon at 6.5 MPG is $0.943 a mile, plus $0.18 a mile for maintenance and $0.05 a mile for tyres, plus $250 in tolls and $100 of other variable costs, which is $0.035 a mile across 10,000 miles.

Variable cost per mile is $1.208 and fixed cost per mile is $0.486, so the total cost per mile is $1.694. Total monthly cost is $16,940, and the cost per loaded mile is $16,940 รท 8,500 = $1.99 โ€” so $1.99 a loaded mile is the break-even rate. At an average rate of $2.50 a loaded mile, revenue is $21,250, profit is $4,310 a month, and profit per loaded mile is $0.51. The $1.69 total cost per mile sits below the ATRI industry average of $2.336, but remember that the ATRI figure includes driver wages โ€” this example is an owner-operator driving their own truck, so if you pay a driver, add that cost to your fixed costs first.

Who should use it, and why it helps

Owner-operators setting their minimum rate, new authorities pricing their first loads, and small fleets comparing trucks, lanes or drivers will get the most from it. It is also the fastest way to answer the question every dispatcher asks: is this load worth it? If the rate is below your break-even rate, the load loses money once the deadhead is counted, however good the headline rate looks.

Once you know your break-even rate, protect the profit it leaves you. Work out your meal deduction with the per diem calculator for truck drivers, check what getting paid early really costs with the factoring cost calculator for truckers, and remember to budget your annual Form 2290 HVUT tax into your fixed costs before the July renewal.

Canadian version โ†’ Cost per km calculator for Canada, in Canadian dollars, kilometres and litres per 100 km.

By Mike Archer โ€” Last reviewed: November 2026.

Follow on WhatsApp Ask by Voice