Key Points:
- CPM pays a fixed rate per dispatched mile: simple and predictable, but it pays the same for easy miles and hard miles.
- Percentage pay shares load revenue — 25% of gross is the article's worked company-driver example — so driver pay rises and falls with the freight.
- Salary pays a fixed weekly amount, which suits dedicated, predictable work and makes payroll easy to plan.
- On the worked week (2,400 miles, $7,200 gross), percentage paid $1,800, CPM roughly $1,590 to $1,640 with detention and salary $1,500 — and the ranking flips in a soft week.
- Accessorial pay — detention, layover and extra stops — is where the models really diverge; define it in writing whichever model you choose.
- Do not compare a company driver's 25% to a leased owner-operator's 75% as if they were the same job: the owner-operator covers their own truck costs.
Pay is the first thing a driver asks about and the last thing a small fleet owner should improvise. The model you choose — per mile, percentage of load revenue, or salary — shapes who applies, how hard they run, how they feel about waiting at a dock for six hours and whether they stay when freight slows down. It also shapes your costs: a model that looks cheap in a strong market can become expensive in a weak one. A model that looks generous on paper can quietly underpay drivers on the weeks that matter most.
This guide compares the three main pay models for company drivers in 2027 — per mile, percentage and salary — with typical rates, worked examples on the same week of freight, the accessorial pay that changes the real comparison and a decision framework for a new carrier or small fleet choosing its first pay structure.
One distinction to keep clear throughout: this article is about company drivers — drivers you employ to run your trucks. Owner-operators leased to a carrier are a different arrangement, typically earning a much larger share of load revenue (often around 70% to 85%) because they cover their own truck expenses. Do not compare a company driver's 25% to a leased owner-operator's 75% as if they were the same job. If you are still deciding what kind of carrier to build, read How to Start a Trucking Company first.
The Three Models at a Glance
| Model | How pay is calculated | Typical range | Best for |
|---|---|---|---|
| Per mile (CPM) | Fixed cents per dispatched mile | About $0.45–$0.85 per mile for company drivers, by experience and freight | Over-the-road and regional drivers who run steady miles |
| Percentage | Fixed share of load revenue | About 20%–35% of load revenue for company drivers | Drivers on varied, higher-value, or specialized freight |
| Salary | Fixed weekly or annual pay | Varies widely; often structured with a guaranteed weekly minimum of roughly $1,200–$1,500 in guaranteed-pay programs | Local, regional and dedicated drivers with predictable schedules |
Those ranges are drawn from published industry guides and job-market summaries, not from a single official pay scale — there is no government-set driver wage — so treat them as market ranges to verify against current postings in your region and freight type. A driver hauling hazmat tankers in the Northeast and a driver hauling dry van in the Southeast are not in the same labor market, even if both are paid "per mile."
Per Mile Pay (CPM): The Industry Standard
Cents-per-mile pay is the standard for over-the-road and long-haul trucking. It is popular for a reason: it is simple, transparent and easy to compare between carriers. A driver earns a set rate for every dispatched mile — the miles the carrier's routing software calculates between pickup and delivery, not necessarily what the odometer reads.
Typical CPM rates fall between about $0.45 and $0.85 per mile. Published guides break that down roughly as: entry-level drivers around $0.45 to $0.52, drivers with two to five years of experience around $0.52 to $0.65, senior drivers with clean records around $0.65 to $0.80 and specialized freight such as hazmat, tanker and flatbed around $0.70 to $0.97. Those bands overlap and move with the freight market, but the shape holds: experience and specialization pay. New drivers start at the bottom.
What counts as a paid mile matters as much as the rate. Carriers measure distance in different ways. Household-goods (HHG) miles use the shortest legal route between two ZIP codes and typically produce the lowest mileage count. Practical miles account for truck-restricted roads and preferred interstate corridors and usually come in a few percent below what a GPS shows. Hub miles, measured from the truck's actual wheel rotation, produce the highest count because they capture every movement, including fuel stops and parking maneuvers. Most large carriers use practical miles. A driver quoted $0.60 per mile on practical miles and a driver quoted $0.58 on hub miles may earn nearly the same — or the reverse of what the headline rate suggests. Ask which method a carrier uses before comparing offers and ask whether loaded and empty miles are paid at the same rate. Most mileage contracts pay for both, but the rate on empty (deadhead) miles is sometimes lower. That difference matters on lanes with long repositioning.
The strength of CPM is predictability. A driver who runs 2,500 miles in a week at $0.60 per mile earns $1,500 that week and can plan around it. A fleet owner can forecast driver cost per mile with equal clarity, which makes pricing freight and budgeting straightforward.
The weakness of CPM is unpaid time. Drivers are paid for miles driven unless additional compensation is explicitly offered. Time spent waiting at docks, sitting in traffic, enduring weather delays, passing inspections, or loading and unloading may not be reflected in the paycheck at all unless the carrier provides detention, layover, breakdown, or stop pay. A 500-mile run at $0.60 per mile pays $300 whether it takes eight hours or twelve. That gap between paid miles and unpaid hours is the central tension of mileage-based pay. It is why the accessorial package matters more than the headline CPM rate. A carrier offering $0.58 per mile with real detention pay after two hours and layover pay can be a better deal for a driver than a carrier offering $0.62 with none.
Percentage Pay: A Share of the Load
Percentage pay ties the driver's earnings directly to what the customer actually paid for the load. Instead of a fixed rate per mile, the driver earns a set percentage of load revenue — typically about 20% to 35% for company drivers, with some guides narrowing the common band to 20% to 30%.
The appeal is straightforward: when freight pays well, the driver shares in it. A shorter, high-value load can pay significantly more than a longer haul at a flat mileage rate, which is why percentage pay appeals to drivers who want their earnings tied to market performance rather than a static number. Flatbed, specialized and high-value freight often suit percentage pay best, because the load's value varies far more than its mileage does. The driver's skill — tarping, securing, handling, customer service — is part of what earns the rate.
The risk is equally straightforward: when freight rates fall, percentage pay falls with them. The driver has no control over the market. A driver on percentage also needs transparency to trust the model. If drivers cannot see the load's gross revenue — the rate confirmation, not a summary — percentage pay breeds suspicion. Suspicion breeds turnover. Carriers that run percentage pay well show drivers the rate confirmation for every load, define exactly what the percentage is calculated on (gross linehaul, or gross including fuel surcharge and accessorials — define it in writing) and pay accessorial revenue through consistently.
Salary Pay: Fixed Pay for Predictable Work
Salary pay — a fixed weekly or annual amount regardless of miles run or loads hauled — is most common in local, regional and dedicated work, where routes are predictable, stops are frequent and the driver's day involves a lot of waiting, traffic and dock work that mileage pay would leave unpaid. Hourly pay is the close cousin of salary here: published guides put typical local and short-haul hourly rates around $20 to $35 per hour. The logic is the same — pay for working time, not just distance.
The strength of salary is stability, for both sides. The driver knows what each paycheck will be, which makes budgeting and family planning possible. The carrier knows its driver cost per week regardless of freight fluctuations. Salary also removes the incentive to rush, cut corners on rest, or resent detention time, because waiting is paid time. For dedicated routes with fixed schedules, that alignment is hard to beat.
The weakness is the ceiling — and the floor. A highly productive driver on salary earns the same as a less productive one on the same route, which can frustrate top performers unless the salary is paired with performance bonuses, safety bonuses, or overtime provisions. Conversely, a salary that looks generous in a normal week can become a burden for the carrier in a slow week, when revenue falls but payroll does not. Salary works best when the work itself is stable: the same routes, similar hours, predictable volume. It fits poorly with irregular over-the-road spot-market work, where miles and revenue swing week to week and a fixed salary either overpays in slow weeks or underpays in strong ones.
Worked Examples: The Same Week, Three Paychecks
Numbers make the comparison honest. Take one driver, one week and three pay models. The freight: five loads, 2,400 dispatched miles (2,000 loaded, 400 deadhead), $7,200 in gross load revenue and 10 hours of detention time that the carrier recovered from brokers.

The freight: five loads, 2,400 dispatched miles (2,000 loaded, 400 deadhead), $7,200 in gross load revenue and 10 hours of detention time that the carrier recovered from brokers.
Per mile at $0.60 per mile: 2,400 miles × $0.60 = $1,440, plus detention pay if the carrier offers it — say $20 per hour after two hours at each stop, which on this week might add roughly $150 to $200 depending on how the detention is structured. Total: roughly $1,590 to $1,640 before taxes and deductions.
Percentage at 25% of gross: 25% × $7,200 = $1,800, plus whatever share of detention revenue the carrier passes through — if detention is included in the gross, it is already in the number; if it is paid separately, it adds on top. Total: roughly $1,800, before any accessorial pass-through.
Salary at $1,500 per week guaranteed: $1,500, regardless of the week's miles or revenue, plus any bonus the carrier offers.
On this particular week, percentage wins, CPM is close behind with detention included and salary trails — but change one variable and the ranking flips. Drop gross revenue to $5,500 in a soft week with the same miles. CPM pays $1,440 while percentage pays $1,375. Cut miles to 1,800 in a week full of waiting. Salary's $1,500 suddenly looks like the best deal in the building while CPM falls to $1,080. That is the whole lesson: no model wins every week. The right model depends on which kind of week your freight produces most often.
Accessorial Pay: Where the Real Comparison Happens
Headline rates mislead. The accessorial package — the extra pay for everything that is not driving — often decides whether a driver stays and whether a fleet owner's advertised rate is honest.
Detention pay. Paid when a driver waits beyond a set free period at pickup or delivery, commonly after two hours, at an hourly rate. Ask: what is the free period, what is the hourly rate, is there a daily cap and does the carrier actually collect it from the broker and pass it through? A detention policy that exists on paper but is never claimed is not a benefit.
Layover pay. Paid when a driver is without a load through no fault of their own, typically overnight. It is the difference between a driver tolerating a slow day and a driver quitting over one.
Breakdown pay. Paid when the truck is in the shop and the driver cannot run. Without it, a driver bears the cost of the fleet's maintenance failures.
Stop pay. Paid per additional stop beyond the first pickup and delivery on multi-stop loads. Multi-stop freight without stop pay is a pay cut disguised as a route.
Safety, fuel and performance bonuses. These can add several thousand dollars a year on top of base compensation when structured well: clean-inspection bonuses, fuel-efficiency bonuses, retention bonuses at 6 or 12 months. Structure them transparently, pay them on time and never use a bonus as a substitute for a competitive base rate — drivers learn the difference fast.
When comparing offers — as a driver, or as a fleet owner benchmarking against competitors — compare the whole package: base rate, paid-mile method, detention terms, layover and breakdown terms, bonus structure, benefits and home time. A $0.65 CPM offer with no detention pay and a two-hour unpaid wait at every shipper is not a better offer than $0.60 with real detention pay. Do the math on a bad week, not a good one.
How a Small Fleet Should Choose
There is no universally best model. There is a best model for your freight, your lanes and your drivers. Work through these questions in order.
1. What does your freight actually look like? Long, steady over-the-road miles with consistent volume point to CPM. Varied, high-value, or specialized loads with big rate swings point to percentage. Fixed local or dedicated routes with predictable hours point to salary or hourly.
2. What kind of week hurts your drivers most? If your drivers' worst weeks are low-mile weeks full of waiting, CPM punishes them for your dispatch problems and salary protects them. If your worst weeks are low-rate weeks with plenty of miles, percentage punishes them for the market and CPM protects them. Choose the model that shares the risk you can actually control and insure against the risk you cannot — with minimums, floors and guarantees.
3. What can you afford in a bad month? Salary is a fixed cost. CPM and percentage are variable costs that fall when revenue falls. A new fleet with thin reserves should be cautious about fixing payroll before revenue is proven. A guaranteed minimum is a middle path: variable cost with a floor that keeps drivers from quitting in the first slow stretch.
4. What will your competitors offer? Drivers compare whole packages, not models. If every carrier in your lanes offers CPM with detention pay, a salary offer has to beat that package on total earnings and home time, not just on stability. Benchmark against current postings for your freight type and region before finalizing a structure.
A practical starting point for many new small fleets: CPM with a real accessorial package and a guaranteed weekly minimum during the driver's first 90 days. It gives drivers the industry-standard structure they understand, protects them from the slow weeks that hit new fleets hardest and gives you a variable cost base while revenue is still proving itself. As lanes stabilize, revisit: dedicated freight may justify moving those drivers to salary. Specialized freight may justify moving them to percentage. Pay models are not tattoos. Review them at least annually and whenever your freight mix changes materially.
Frequently Asked Questions
What is the average truck driver pay per mile?
Published guides put typical company-driver CPM between about $0.45 and $0.85 per mile, with entry-level drivers near $0.45 to $0.52, experienced drivers near $0.52 to $0.65, senior drivers with clean records near $0.65 to $0.80 and specialized freight near $0.70 to $0.97. The paid-mile method — HHG, practical, or hub miles — affects the real earnings as much as the rate itself.
Is percentage pay better than per mile pay?
It depends on the freight. Percentage pay wins on high-value, shorter, or specialized loads and in strong markets, because the driver shares in load value rather than just distance. CPM wins on steady, high-mileage freight and in soft markets, because pay does not fall when rates do. Compare both on your own lanes, using rate per total mile and total weekly earnings, not headline rates.
Which pay model is best for a small fleet just starting out?
For most new small fleets running over-the-road or regional freight, CPM with a real detention and layover package and a 90-day guaranteed minimum is the most defensible starting point: it is the structure drivers understand, it keeps your costs variable while revenue is unproven and it gives you a clean baseline to revisit once lanes stabilize.
The Bottom Line
Per mile pay rewards miles, percentage pay rewards load value and salary rewards time. Each model is fair on the freight it fits and unfair on the freight it does not. The accessorial package — detention, layover, breakdown, stop pay and bonuses — often matters more than the headline rate. Run all three models against your own weeks of freight before choosing, define the calculation in writing, show drivers the numbers they are paid on and review the structure whenever your freight mix changes.
Pay drivers transparently, on the model that fits the work. They will stay long enough for a small fleet to become a bigger one. Pay them opaquely, on the wrong model. No rate will keep them — because drivers always figure out, usually on the second paycheck, exactly what their time is worth to you.
This guide was prepared in good faith from official sources, including FMCSA and state agency publications, and was checked at the time of writing. Fees, rules and procedures change. Errors and omissions are excepted. Please confirm current requirements with the relevant agency before filing or travelling. If you spot anything that needs correcting, email us at contact@truckingmind.com — we will verify it and update this page.